• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.52-60
• /
• 2013

ITS technologies are in the research and development around the world as a solution for maximizing the efficiency of the existing road infrastructure, solving the complex traffic problems and providing the convenient driving services. The core of these ITS technologies is to provide the information for the requesting users in fast and accurate way from the server. In real driving conditions, there are many communication barriers around the vehicles and the base stations so that an accurate and robust handover technology is needed in order to ensure seamless ITS services. This paper introduced an WAVE handover algorithm implemented in a real communication device and five parameters mainly affecting the handover performance are evaluated. The handover performance is measured by changing the parameter values at a highway testbed. The test results show that the handover algorithm parameter values should be configured carefully to remove the handover ping-pong problems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.1-8
• /
• 2012

In this paper, we propose an algorithm to improve collision avoidance in Vehicle-to-Vehicle (V2V) networks based on IEEE 802.11p. Since IEEE 802.11p adopts CSMA/CA as a multiple access scheme and an emergency warning message (EWM) is delivered to behind vehicles in a multi-hop manner, due to transmission collision, the more vehicles in the vehicle chain results in a longer delay. The longer delay increases the possibility of a rear-end collision. In order to ensure message reception with low latency, we consider implicit acknowledgement of a broadcasted EWM message and propose an algorithm to reduce redundant message transactions, called Two-Way Implicit Acknowledgement (TWIA). By simulations, we show that our proposed algorithm can reduce the latency until the last car receives the message by 9% and the success rate every car receives the message within 0.7sec by 12% at 100 fixed-number-of-car environment.

• Korean Journal of Crystallography
• /
• v.13 no.1
• /
• pp.21-24
• /
• 2002

The crystal structure of cholesteryl crotonate was investigated by X-ray diffraction. Crystallo-graphic data for the title compound: P2₁, a = 13.446(4) , b = 11.802(3) , c = 18.782(5) , β = 103.99(2)°, Z = 4. Reflections were collected with an Enraf-Nonius CAD-4 diffractometer equipped with a graphite monochromator. The structure was solved by direct methods and refined by least-squares analyses. The final R value was 0.092 for 1604 reflections. The cholesterol fragment of the title compound were in good agreement with those for related cholesterol derivatives. The molecules were stacked in clearly separated layers. At the center of the layers, there were cholesterol-cholesteryl interactions between the symmetry-related A molecules and the cholesteryl-C(17) side chain of B molecules. There were also interactions between the C(17) side chain of A molecules and the crotonate chains off and B molecules in the interface region between layers. The crystal structure of the title compound turned out to be isostructural with those of cholesteryl ethylcarbonate, cholesteryl propylcarbonate, and cholesterol crotylcarbonate. The crystals show the liquid crystalline state having the cholesteric phase.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.624-627
• /
• 2014

In vehicular network, the basic goal is to provide vehicle safety service and commercial service such as ITS(Intelligent Transportation System) or video, etc on the road. And most research concentrated on transportation of safety message in congestion situation. It is important to allocate channel for safety message in congestion situation, but providing suitable service is also important problem in vehicular network. For this reason, IEEE 1609.4 allocate 4 multiple service channels (SCHs) for non-safety data transfer. But, in congestion situation with many vehicles, the contention for channel acquisition between services becomes more severe. So services are provided improperly because of lack of service channel. This paper suggests dynamic channel allocation algorithm. The proposed algorithm is that RSU(RaodSide Unit) maintain and manage the information about service and status of channels. On based of the SJF(Shortest Job First) scheduling using those information, RSU selects the most appropriate channel among the 4 SCHs allocated by IEEE 1609.4 in network congestion situation.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.601-603
• /
• 2009

This letter presents a high performance 2.4 GHz two-stage power amplifier (PA) operating in the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$ for IEEE 802.11g, wireless local area network application. It is implemented in InGaP/GaAs hetero-junction bipolar transistor technology and has a bias circuit employing a temperature compensation technique for error vector magnitude (EVM) performance. The technique uses a resistor made with a base layer of HBT. The design improves EVM performance in cold temperatures by increasing current. The implemented PA has a dynamic EVM of less than 4%, a gain of over 26 dB, and a current less than 130 mA below the output power of 19 dBm across the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.280-282
• /
• 2012

Wi-Fi P2P는 Wi-Fi Alliance에 의해 제정된 표준 규격으로 근접 거리에 위치한 장치들간의 효율적이고 빠른 데이터 송수신을 위해 IEEE 802.11n을 이용하고 있다. 근접거리 통신을 위한 기존 블루투스 등의 규격이 갖는 단점을 보완했다는 점에 있어 높은 평가를 받고 있으며, 모바일 디바이스용 플랫폼인 Android ICS 버전부터 공식적으로 지원됨에 따라 널리 사용될 것으로 전망된다. 한편, 한국전자통신연구원(ETRI)에서는 오랫동안 PAN 수준의 네트워킹을 연구해왔으며 그 일환으로 PAN 및 M2M에 적합한 통신 수단으로 여겨지는 Wi-Fi P2P에 대한 연구도 진행 중에 있다. 이에 본 논문에서는 ETRI가 과제를 수행하면서 부수적으로 연구한 Wi-Fi P2P를 위한 Linux용 플랫폼 구조를 공유하고자 한다. 특히 Linux Wireless 프로젝트인 hostap에 속한 wpa_supplicant를 이용해 실제로 동작하는 Wi-Fi P2P 커넥션 매니저를 설계하고 구현하는 방법을 설명함으로써 Android 플랫폼이 아닌 일반적인 Linux 장치에서 Wi-Fi P2P를 사용할 수 있는 방법에 대해 논한다.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.11
• /
• pp.1211-1216
• /
• 1998

Bis(diethyldithiocarbamato)ioxomolybdenum(VI), cis-MoO2(S2CNEt2)2, 1, reacted with chlorotrimethylsilane (Me33SiCl) to give a seven-coordinate, pentagonal bipyramidal complex MoOC12(S2CN]Et2)2, 3, in which the oxo ligand is trans to the chloride ligand and the two chloride ligands are mutually cis. The monooxo molybdenum complex bis(diethyidithiocarbamato)oxomolybdenum(IV), MoO(S2CNEt2)2, 2, reacted with phenyl isocyanate (PhNCO) to give an Mo dimer MO2{μ-N(CONPh)Ph}(μ-NPh)(NPh)2(S2CNEt2)2, 4, which contains an Mo-Mo bond, two diethyldithiocarbamato ligands, two terminal imido (NPh) ligands, and two bridging hnido (NPh) ligands. One of the two bridging NPh ligands seemed to have been attacked by the electrophilic phenyl isocyanate carbon, which suggests that the bridging imido NPh ligand is more nucleophilic than the terminal one. Crystallographic data for 3: monoclinic space group P21/c, a=8.908(l) Å, b=17.509(3) Å, c=12.683(2) Å, β=110.15(1)°, Z=4, R(wR2)=0.0611(0.1385). Crystallographic data for 4-THF: orthorhombic space group P212121, a=17.932(4) Å, b=22.715(5) Å, c=11.802(3) Å, Z=4, R(wR2)=0.0585(0.1286).

• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.314-320
• /
• 1999

Several bisphosphine- and bisphosphite-substituted Re-imido complexes have been prepared from Re(NPh)(PPh3)2Cl3, 1, and Re(N-C6H3-i-Pr2)2Cl3(py), 4. Compound 1 reacted with trimethyl phosphate (P(OMe)3) to give a mixture of two isomers,mer,trans-Re(NPh)(P(OMe)3)2Cl3, 2, and fac,cis-Re(NPh)(P(OMe)3)2Cl3, 2a. In this reaction, the mer,trans-isomer is a major product. Complex 1 also reacted with triethylphosphine (PEt3) to exclusively give mertrans-Re(NPh)(PEt3)2Cl3, 3. Compound 4 reacted with trimethylphosphine (PMe3) to give mer,trans-Re(N-C6H3-i-Pr2)(PMe3)2Cl3, 5, which was converted to mer-Re(N-C6H3-i-Pr2)(PMe)(OPMe3)Cl3, 6, on exposure to air. Crystallographic data for 2: monoclinic space group P21/n, a = 8.870(2) Å, b = 14.393(3) Å, c = 17.114(4) Å, β = 101.43(2)°, Z = 4, R(wR2) = 0.0521(0.1293). Crystallographic data for 5: orthorhombic space group P212121, a = 11.307(l) Å, b = 11.802(l) Å, c = 19.193(2) Å, Z = 4, R(wR2) = 0.0250(0.0593). Crystallographic data for 6: orthorhombic space group P212121, a = 14.036(4) Å, b = 16.486(5) Å, c = 11.397(3) Å, Z = 4, R(wR2) = 0.0261(0.0630).

• Information and Communications Magazine
• /
• v.21 no.3
• /
• pp.13-40
• /
• 2004

홈 네트워킹은 다양한 유ㆍ무선 네트워킹 기술을 적용하여 개개인의 생활을 더 윤택하게 해 주는 서비스를 제공하고 이를 통해 커다란 시장을 형성할 수 있는 미래의 신 성장 동력 산업이다. 이를 위해 PLC, IEEE 1394, HomePNA와 같은 유선 홈 네트워킹 기술은 물론 WLAN, WPAN, UWB 등과 같은 무선 네트워킹 기술이 여러 가지의 응용 분야를 무기로 자신의 영역을 차지하려 하고 있다. 따라서 댁내의 기기는 이와 같은 네트워킹 기술을 지원하도록 설계되어야 하지만, 그 위에 UPnP나 HAVi, Jini, HNCP 등과 같은 미들웨어가 탑재되어야 상호 호환성이 지원된다. 그리고 하나의 표준화된 H/W나 S/W 플랫폼 위에 혼 게이트웨이가 동작하면 집 외부에서 원격으로 새로운 서비스를 지원할 수 있게 되며 응용 분야가 다양하게 확장될 수 있다. 그 위에 유비퀴터스 네트워킹 개념을 도입하여 홈 네트워크가 필요로 하는 서비스를 지원함으로써 커다란 시장을 이끌어 갈 수 있게 된다. 본 논문에서는 홈 네트워킹 기술의 표준화 현황에 대해 정리하고, 차세대 성장 동력으로서의 홈 네트워킹을 위해 반드시 적용해야 할 유비퀴터스 네트워킹 개념과 이로부터 효과를 얻기 위해 집안에 홈 네트워크를 어떻게 수용하게 할 것인지에 대해 논하였다. 끝으로 유비퀴터스 네트리킹을 통한 막대한 시장을 먼저 확보하기 위한 무선 홈 네트워킹 기술의 아키텍처를 정하면서 이를 구현하기 위해 먼저 수행해야 할 Mesh Networking 기술 및 Multi-Hop 네트워킹 기술과 같은 연구분야에 대해 논하였다.(중략)

• ETRI Journal
• /
• v.36 no.3
• /
• pp.352-360
• /
• 2014

This paper presents a 900 MHz zero-IF RF transceiver for IEEE 802.15.4g Smart Utility Networks OFDM systems. The proposed RF transceiver comprises an RF front end, a Tx baseband analog circuit, an Rx baseband analog circuit, and a ${\Delta}{\Sigma}$ fractional-N frequency synthesizer. In the RF front end, re-use of a matching network reduces the chip size of the RF transceiver. Since a T/Rx switch is implemented only at the input of the low noise amplifier, the driver amplifier can deliver its output power to an antenna without any signal loss; thus, leading to a low dc power consumption. The proposed current-driven passive mixer in Rx and voltage-mode passive mixer in Tx can mitigate the IQ crosstalk problem, while maintaining 50% duty-cycle in local oscillator clocks. The overall Rx-baseband circuits can provide a voltage gain of 70 dB with a 1 dB gain control step. The proposed RF transceiver is implemented in a $0.18{\mu}$ CMOS technology and consumes 37 mA in Tx mode and 38 mA in Rx mode from a 1.8 V supply voltage. The fabricated chip shows a Tx average power of -2 dBm, a sensitivity level of -103 dBm at 100 Kbps with PER < 1%, an Rx input $P_{1dB}$ of -11 dBm, and an Rx input IP3 of -2.3 dBm.