• The Journal of Engineering Geology
• /
• v.7 no.1
• /
• pp.63-79
• /
• 1997

In this study, our purpose is to develop a technique to discriminate artificial explosions from local microearthquakes on the basis of time-frequency domain. To obtain spectral features of artificial explosions and microearthquakes, we used 3-d spectrograms(frequency, time and amplitude) because this is a useful tool to study the frequency content of entire seismic waveforms observed at local and regional distances (e. g., Kim et al., 1994). P and S waves from quarry blasts show that frequency content of dominant amplitude appeared above 10 Hz and Rg phases that are observed at near distance ranges. But P and S waves from microearthquakes have more broad frequency content as well as below 10 Hz. And for discrimination, Pg/Lg spectral ratio is performed below 10 Hz. In order to select time windows we computed group velocity using multiple filter method(MFM) and removed free surface effects from all 3-components data for improving on data quality. Next step, we computed Fast-Fourier transform, and a log average spectral amplitude over seven frequency bands : 0.5 to 3, 2 to 4, 3 to 5, 4 to 6, 5 to 7, 6 to 8 and 8 to 10 Hz. The best separation is observed from 6 to 8 Hz.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.854-857
• /
• 2018

It becomes important to analyze the effects of electromagnetic wave on human body, as various wireless equipments are widely used in daily life. SAR (specific absorption rate) is a parameter of the effects of electromagnetic wave on human body. However, it considers only human tissues, and it is difficult to evaluate the effects of electromagnetic wave when metal artifacts are inserted such as dental implants. This paper introduces a method to simulate SAR, and gets its simulated results. Simulated SAR of human head model with dental implants in 30 GHz 5th generation mobile communications (5G) frequency band is $2.50{\times}10^{-3}W/kg$ in maximum and $8.58{\times}10^{-7}W/kg$ in average. These values are absolutely below 1.6 W/kg Korean domestic SAR limit.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.253-261
• /
• 2010

In this paper, the design and the fabrication of dual bandpass filter using heterogeneous resonators is presented. Each resonator would not have an effect on each resonant frequency. Two types of resonators are designed to have different fundamental resonant frequencies, one for the lower passband and the other for the upper passband. In the lower band, half and quarter wavelength resonators were used. In the upper band, a dual-mode resonator was used for adjusting bandwidth. In the upper pass band frequency, resonators of lower passband acts as the input and output. For WLAN, Proposed filters with different second passband frequencies at 2.45/5.2 GHz and 2.45/5.8 GHz are designed and fabricated.

• Electronics and Telecommunications Trends
• /
• v.23 no.1 s.109
• /
• pp.99-108
• /
• 2008

3G LTE 이동통신 시스템은 패킷 데이터 전송에 기반을 둔 다양한 서비스 지원을 목표로 하는 기술로서 최대 20MHz 대역폭 기준 하향링크 최대 전송속도 100Mbps, 상향 링크 50Mbps의 전송속도를 지원한다. 그리고 데이터 전송 효율 향상, 효율적인 주파수 자원 이용, 이동성, 낮은 latency, 패킷 데이터 전송에 최적화된 기술과 서비스 품질보장 등을 제공한다. 3G LTE 시스템은 기존 시스템에 비해 주파수 및 고속의 멀티미디어 서비스를 효율적으로 사용하는 IP 네트워크로 진화되는 이동통신 시스템이다. 3G LTE 이동통신 단말은 대역폭 20MHz 기준으로 이동속도 120km/h에서 하향링크 30 Mbps, 상향링크 15Mbps의 데이터 전송속도를 지원한다. 또한, 고품질 및 고속의 멀티미디어 서비스를 제공하는 단말로서 3.5세대인 HSDPA에 반해 모바일 영상 서비스가 본격적으로 제공되는 3G LTE 이동통신 시스템의 단말이다. 본 고에서는 3G LTE 이동통신 시스템 단말 플랫폼 기술 동향과 전망에 대하여 논의한다. II장에서는 3G LTE 표준 규격을 기반으로 구현하는 3G LTE 이동통신 시스템 및 단말 플랫폼을 서술하며, III장에서는 국ㆍ내외 단말 플랫폼 기술 동향에 관한 내용을 기술한다. IV장에서는 향후 발전 전망에 대해 살펴보고, 마지막으로 결론을 맺고자 한다.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.791-798
• /
• 1994

Ohmic heating is a food processing operation in which heat is internally generated within foods by the passage of alternating electric current. The process enables highly viscous paste foods such as Kochujang, and fermented soybean paste to be heated very fast. In order to develope the novel pasteurization process of paste foods, static Ohmic heating system was built, and heating characteristic during Ohmic heating under various conditions were studied. Electric conductivities of Kochujang and fermented soybean paste at room temperature were 1.865 S/m and 2.510 S/m, respectively and increased linearly with increasing temperature. Specific heating rate was highly dependent on the frequency. The highest heating rate was achieved at 5 KHz for Kochujang and 20 KHz for fermented soybean paste. Uniform heating throughout the sample was achieved during Ohmic heating with low frequency electrical currents, however above 5 KHz frequency, surface temperature was several degrees higher than the bulk.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.27-31
• /
• 2010

Recently, spectrum requirements are rapidly increasing in accordance with wireless communication development. For this reason, FCC(Federal communications commission) is considering cognitive radio system to increase spectral efficiency. In this paper, we present the performance analysis of signal detection by using RS(Reference signal) for LTE environments. Especially, we analyze the performance of detection probability in case of downlink LTE system. In the simulation, we generate OFDMA signal format which is specified in the LTE system. We assume additive white Gausssian noise channel environment. We estimate the performance by setting the threshold value of 5 % and 10 % based on CFAR(Constant false alarm rate) and false alarm rate, respectively. Finally, we discuss a future study plan on the applicability of CR to the LTE system.

• The Journal of Engineering Geology
• /
• v.4 no.2
• /
• pp.207-218
• /
• 1994

The natural constants of moving coil type geophone can be determined by free impedance and step force method. The former method was desirable for the measurement of natural frequency($f_o$), inertial mass(m) and damping factor($h_o$), but the latter method for sensitivity(G). In particular, the value by the latter method should be corrected for the noise by the long period movement of measurement device. The results of frequency characteristics from these constants operate the accelerometer and displacement system in the boundary of natural frequency.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.297-303
• /
• 2002

배 골판지 포장상자의 진동특성을 계측, 분석하기 위하여 유압가진기을 이용하여 단일 포장상자의 진동실험 및 적재된 포장상자의 진동실험을 위한 시스템을 구성하고 진동특성 계측용 컴퓨터 프로그램을 개발하며 진동실험을 하였으며, 그 결론은 다음과 같다. 1. 유압가진기의 성능실험을 하여 배 골판지 포장상자의 진동실험에 적합한 것으로 나타났다. 2. 단일 배 골판지 포장상자의 피크 주파수는 27.02 Hz이었으며, 피크 가속도는 1.9 G이었다. 3. 적재된 배 골판지 포장상자와 적재 단수별 피크 주파수는 19.02, 18.14, 16.62 및 15.40 Hz이었으며, 피크 가속도는 2.2987, 3.7654, 5.6087 및 7.9852 G이었다. 4. 배의 경우에는 운송시 과도한 진동에 노출되어 손상을 입게 되는데 만약 골판지 상자안의 배가 팰리트 적재로 운송시 15∼20 Hz 주파수 대역의 진동을 하게 되면 포장상자의 최하단에서부터 최상단까지 가속도와 변위가 증가되어 배의 심각한 멍(bruise) 손상을 초라하게 된다. 5. 배 골판지 포장상자의 진동시 최하단의 상자의 경우에는 상단에 위치한 상자로부터 진동에 의한 압축력을 받아 배의 손상 원인이 되었다. 이것은 농산물이 유통중의 진동에 노출되었을 때 농산물의 손상은 최하단의 골판지 포장상자의 압상의 원인이 제일 크다는 것을 알 수가 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.730-737
• /
• 2007

The new wireless multimedia environment is coming because of the variety of an user requirement and a traffic increase which we can not accept in the IMT-2000 present systems. To offer the wireless multimedia service the world wireless communication company which included the ITU-R is developing the standard and technique of 4G systems. We analyzed the technique criteria of the 4G wireless communication system in this paper which is based on that of WiBro System. We referred to the technique criteria of the WiBro system and deduced an occupied frequency bandwidth which is the common element of the uplink and downlink system among main wireless communication technique criteria. And we verified this through the simulation. So we proposed the occupied frequency bandwidth for 4G wireless communication in this paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.103-107
• /
• 2009

In this paper, we designed and implemented a dual band chip antenna for WLAN, which contains within the small LAN card contrary to the enternal AP(Access Point) antenna. Limiting about the antenna size, we used dielectrics of high permittivity. Totally considering problems of demand-supply, price and characteristics, we used that relative dielectrics of ceramic is 9.8 and the thickness is 3.5mm and 5mm. Ceramic antenna can be used not only triple mode of IEEE 802.11.a,g and b but also broadband. The frequency bands have wideband characteristics of 2.4~2.5GHz and 4.9~5.85GHz and relatively constant performance.