• 제목/요약/키워드: 50s and above

검색결과 1,423건 처리시간 0.032초

Triazine Thiol 유도체(誘導體)에 의한 1-Chlorobutadiene-Butadiene Copolymer의 안정화효과(安定化效果)에 관한 연구(硏究) (A Study on the Stabilization Effects of 1-Chlorobutadiene-Butadiene Copolymer by Triazine Thiol Derivative)

  • 유종선;산하진삼;백남철
    • Elastomers and Composites
    • /
    • 제22권2호
    • /
    • pp.109-120
    • /
    • 1987
  • In this study, as one of the developing ways of the functional elastomer, improvement of the functionality of CB-BR was attemped through stabilization. At first the stabilization effect of CB-BR and the concentration dependancy in CB-BR were determined. Then, triazine thiol derivative(BPTT) was synthesized by reacting p-aminodiphenylamine with cyanuric chloride. Further the functional mechanism and the effects of the antioxidants were investigated using BPTT together with other various antioxidants in liquid and solid states. The results obtained are as follows: 1) The aging of CB-BR depended on the concentration and temperature. Thus, at a low temperature of $50^{\circ}C$, the aging proceeded with gel formation; at high temperature above $100^{\circ}C$ and in above 4wt% concentration, the aging occured by the formation of gel. And in concentrations below that, the aging proceeds with a decomposition caused by oxygen attacked to elastomer molecules. 2) The effect of antioxidation of CB-BR in the liquid state was at it's best when the MBIZ and BPTT were used at $110^{\circ}C$, 4hrs after the oxidation. 3) The effect of antioxidation of CB-BR in the solid state was the best choice the simultaneous use of NDBC and BPTT at $50^{\circ}C$, 30days after the oxidation.

  • PDF

시니어세대의 연령에 따른 실내복 디자인 선호도 및 구매행동 연구 - 50대 이상 중.노년 여성을 중심으로 - (A Study of Senescent Female Consumer's Design Preferences for their Lounge Wear and Buying Behaviors - A Focus on Elderly Women over Fifty -)

  • 정삼호
    • 복식
    • /
    • 제59권4호
    • /
    • pp.143-154
    • /
    • 2009
  • The purpose of this research is to investigate elderly, middle-aged female consumers' design and material preferences for lounge wear and after understanding senescent women's propensity to purchase lounge wear. The subject of research were to those living in the Seoul and capital region and 612, which did not comprise missing values, were collected and used for data analyses. All the age groups including those in their 50s and 60s prefer jacket and pants styles the most and these styles are the most favored as lounge wear as well. Those in their 50s and 60s prefer a round neckline the most while those in their 70s favor a V neckline the most. Analyses of sleeve styles of senescent women show that all the age groups favor a straight set, or a sleeve design, the most. Although the aged people investigated in this research have relatively high purchasing power, it is found that they tend to buy low priced lounge wears. Reviewing all of the above-mentioned results, the prices of garments for senescent people will be set in consideration of their economic level, so that good quality commodities may be produced and sold at different prices.

ML 기반의 전기추진시스템을 위한 PCS에 관한 연구 (A Study on PCS for ML-Based Electrical Propulsion System)

  • 이종학;이헌석;오진석
    • 한국정보통신학회논문지
    • /
    • 제23권9호
    • /
    • pp.1025-1031
    • /
    • 2019
  • 본 연구는 선박용 해수펌프를 ML 기반으로 한 알고리즘을 구현하여 효율적으로 운용할 수 있는 PCS를 제안한다. PCS가 탑재된 2척의 선박에서 해수온도, RPM, 전력 소모 데이터를 취득하여 회귀 분석법으로 분석하고, 새로운 알고리즘을 제시한다. 제시하는 알고리즘을 적용하였을 때 Ship A는 PCS를 적용하지 않았을 때 대비하여 약 36%를 절감하였고, 특정 해역온도인 $19{\sim}27^{\circ}C$$32^{\circ}C$ 이상의 해역에서 ML 기반의 알고리즘이 Ship A의 PCS보다 약 1% 더 절감하였다. Ship B는 PCS를 적용하지 않았을 때 대비하여 약 50%를 절감하였고, 특정 해역온도인 $19^{\circ}C$ 이상의 해역에서 Ship B의 PCS보다 약 2%더 절감하였다. 도출된 데이터를 이용하여 최적의 펌프 속도와 항로를 제안할 수 있다. 추가적으로, 취득 데이터의 추세를 활용하여 효율이 낮아졌을 시에 펌프의 성능이나 MGPS의 소제 시기를 유추할 수 있다.

첨가제가 담배 연기성분에 미치는 영향 (The Effect of Some Additives on the Components of Cigarette Smoke)

  • 나도영;제병권;이창국;조시형;이동욱
    • 한국연초학회지
    • /
    • 제27권1호
    • /
    • pp.40-50
    • /
    • 2005
  • The influence of tobacco additives on the composition of the combustion products in mainstream smoke is discussed. The effect of additives on the chemical composition of smoke have been further evaluated in order to discover additives that would alter the chemical composition of smoke. Tobacco was uniformly treated at a 1-5$\%$ level with 8 classes of additives. Group M treated with alkali metal salt and group S, F, O give lower tar, nicotine and CO values than the control. Group AN treated with natural antioxidant gives higher tar and CO values than the control. The increases are most probably due to the high transfer rate of the ingredients to smoke. M3 and P1 reduced above the $50\%$ of TSNA from the smoke. M4 and P1 reduced above the $50\%$ of HCN from the smoke. These results suggest that tobacco additives alter pyrolysis or combustion product distribution and provide fundamental data to lead the development of a RRP(reduced risk product).

Mechanical Properties of Bulk Amorphous Ti50Cu20Ni20Al10 Fabricated by High-energy Ball Milling and Spark-plasma Sintering

  • Nguyen, H.V.;Kim, J.C.;Kim, J.S.;Kwon, Y.J.;Kwon, Y.S.
    • 한국분말재료학회지
    • /
    • 제16권5호
    • /
    • pp.358-362
    • /
    • 2009
  • Ti$_{50}$Cu$_{20}$Ni$_{20}$Al$_{10}$ quaternary amorphous alloy was prepared by high-energy ball milling process. A complete amorphization was confirmed for the composition of Ti$_{50}$Cu$_{20}$Ni$_{20}$Al$_{10}$ after milling for 30hrs. Differential scanning calorimetry showed a large super-cooled liquid region ($\Delta$T$_x$ = T$_x$ T$_g$, T$_g$ and T$_x$: glass transition and crystallization onset temperatures, respectively) of 80 K. Prepared amorphous powders of Ti$_{50}$Cu$_{20}$Ni$_{20}$Al$_{10}$ were consolidated by spark-plasma sintering. Densification behavior and microstructure changes were investigated. Samples sintered at higher temperature of 713 K had a nearly full density. With increasing the sintering temperature, the compressive strength increased to fracture strength of 756 MPa in the case of sintering at 733 K, which showed a 'transparticle' fracture. The samples sintered at above 693 K showed the elongation maximum above 2%.

HMR(Home Meal Replacement) 제품 선택속성에 대한 IPA 분석 - 20~40대와 50대 이상 소비자 비교를 중심으로 - (IPA on the Choice Attribute of HMR (Home Meal Replacement) Products - Focusing on the Comparison among Consumers aged between 20 and 40, or over 50 -)

  • 최정화;이나영
    • 한국식품영양학회지
    • /
    • 제32권1호
    • /
    • pp.50-60
    • /
    • 2019
  • The importance and satisfaction with the purchasing characteristics and choice attribute of home meal replacement (HMR) products for consumers aged between 20 and 40, or over 50. In addition to identify the factors that must be first considered in the development of HMR products importance-performance analysis. 791 consumers aged between 20 and 40, or over 50, living in Seoul have experience in purchasing HMR participated in the survey. The survey consisted of four sections: The purchasing characteristics of HMR, the importance and satisfaction with HMR choice attribute, and general questions. T-tests and IPA were conducted to compare the groups of consumers aged between 20 and 40, or over 50. The factor analysis show the following results: 0.899 for "convenience", 0.094 for "hygiene", 0.871 for "quality", 0.834 for "taste", and 0.822 for "price". The average score of the importance of the choice attribute when purchasing HMR products 3.50. For consumers aged between 20 and 40, the score 3.49. For consumers over 50, the score 3.52. There is a significant difference "hygiene (p<0.001)", "quality (p<0.05)", and "price (p<0.05)". For consumers aged between 20 and 40, the score 3.72. For consumers over 50, the score was 3.78. There a significant difference only in "hygiene (p<0.05)". The results of the IPA demonstrate that the categories that belong to "Focus here" are "new HMR products" and "diverse HMR products" for all consumers aged between 20 and 40 and over 50. Hence, food companies should endeavor to develop new and diverse HMR products first.

하구방조제의 홍수조절 해석 (Flood control analysis of the sea dike at estuary.)

  • 서승덕
    • 물과 미래
    • /
    • 제10권2호
    • /
    • pp.113-124
    • /
    • 1977
  • Alone the southwesten coast of Korean peninsula, the extensive available arable acreages suited for forming are found in the development of tidal flats in the geographically curved bays with a motable tidal emplitude. It was found that the developments of these tidal flats cover an estimated area more than 276,000ha. In this paper, a flood control system by Pul's Storage Indication Method and Pul's Graphical Method at Return Periods-50 yrs, design rainfall-267mm per 48hrs and design flood-926c.m.s. and at 0.2meter control height above the High Water Ordinary Spring Tide Level (+11.0m) was studied. At the result, the flood demage in the reservoir at Return Periods-50 yrs and the tidal level at H.W.O.S.T.L. were satisfied to the below E.L. 11.20m (Flood Level in the reservoir). Well skilled flood control technique and management and control of draining sluice gate should be required for the disaster prevention from the flood and tide damage.

  • PDF

고삼으로부터 항균활성 물질의 분리 및 구조 동정 (Isolation and Identification of Antimicrobial Active Substance from Sophora flavescens Ait.)

  • 안은영;신동화;백남인;오진아
    • 한국식품과학회지
    • /
    • 제30권3호
    • /
    • pp.672-679
    • /
    • 1998
  • 고삼 75% 에탄올 추출물과 클로로포름 분획물을 첨가하여 몇가지 식중독 미생물의 증식억제 양상과 분리된 유효 물질의 구조를 확인하였다. 이 분획물의 항균 효과를 시험한 결과 Listeria monocytogenes (ATCC 19111, 19112, 19113, 19114 및 15313)에 대한 최소 증식억제 농도가 각각 $50{\sim}500\;ppm$과 50 ppm 이하로 확인되었다. 항균 활성을 보인 클로로포름 분획물을 silica gel column chromatography로 연속 2회 정제하여 얻은 황색 분말의 항균 활성 소획분 S-10-6은 L. monocytogenes 5 균주, Bacillus subtilis 및 Staphylococcus aureus에 대해서는 10 ppm 농도에서 뚜렷한 증식억제 효과를 보였으며 특히 L. monocytogenes 5균주에 대해서는 $30{\sim}50\;ppm$ 수준에서 살균 효과가 인정되었으나 E. coli 경우 100 ppm 농도에서도 증식억제 효과가 없었다. 항균 활성을 보인 소획분(S-10-6)을 IR, $^1H-NMR$$^{13}C-NMR$로 구조를 동정한 결과 flavanone 화합물의 하나인 kushenol F로 확인되었다.

  • PDF

순간금형가열법에 의해 제작된 ABS의 pH변화에 따른 무전해 Ni도금 특성 (Effects of pH Variation on the Properties of Electroless Nickel Plating on ABS Made by MmSH)

  • 송태환;박소연;이종권;류근걸;이윤배;이미영
    • 한국산학기술학회논문지
    • /
    • 제5권5호
    • /
    • pp.433-437
    • /
    • 2004
  • The MmSH is a process of injecting ABS to produce innovated physical properties compared to the conventional injection process. Physical properties such as thickness and adhesion strength of Ni plate electrolessly coated on a conventional and a MmSH injected ABS have been studied in the pH range 4~8. Thickness of the plate on the MmSH and the conventionally injected ABS appeared to be directly proportional to pH. The ABS processed by the conventional injection showed adhesion strength corresponded to ASTM 4B above pH 5. On the other hand, the ABS processed by the MmSH injection showed a superior adhesion strength corresponded to ASTM 5B above pH 6. It was calculated the shielding effectiveness of above 50 dB in all conditions.

  • PDF