• 한국광학회지
• /
• 제4권2호
• /
• pp.206-211
• /
• 1993

$LilO_3$ 결정에서 최대 출력 30mW의 저출력 CW 반도체레이저에 대한 제2조화파 발생 실험을 실시하였다. 두개의 오목 거울과 두개의 평면 거울로 이루어진 고리형 enhancement 공진기를 이용하여 제2조화파 변환 효율을 증가시켰다. 사용된 오목 거울의 곡률 반경은 50mm 이었고, $LilO_3$ 결정은 길이 5mm와 10mm의 두 개를 사용하였다. 펌핑 출력에 따른 제2조화파의 출력을 측정하고 이론값과 비교 하였다. 794nm의 펌프출력이 28mW 일 때 10mm의 $LilO_3$ 결정에서 $6.6{\mu}W$의 397 nm 출력을 얻을 수 있었다.

• 미생물학회지
• /
• 제23권2호
• /
• pp.129-137
• /
• 1985

The RK-temperate phage which infected with Bacillus cereus was isolated and the characters were investigated. The induction of RK-temperate phage from host bacterium attained by ultraviolet light irradiation (15W, 30cm, 30-120sec) and mitomycin C treatment (0.2-2 ug/ml). The host range of RK-temperate phage was not revealed with lysogenic and related strains of B. cereus. But B. cereus(PS) 352 which obtained by N-nitrosoguanidine treatment (1,000{$\mu}g/ml)$ to phage infected with host bacteria was sensitive bacteria of RK-temperate phage. RK-temperate phage was stabilized at the condition of nutrient broth (pH 7-8), Tris-buffer (pH 7-8) and ammonium buffer (pH 8-9) and Sorensen's phosphate buffer (pH 6-7), but unstabilized at other salt solutions and pH range. Also, thermostability was to $45^{\circ}C$ but unstabilized at above $50^{\circ}C$. At RK-temperate phage, the measurment values of head, neck, mid tail and end tail were 59nm, $9{\times}16nm,\;10{\times}189nm,\;and\;10{\times}14nm$ respectively. The morphology of head was regular polyhedron, and the end tail was coneate form. On the one hand, the number of capsid protein layer of tail were consist of 4, 35, and 1 at neck, mid tail, and end tail, respectively. RK-temperate phage was identified with DNA phage and G+C contents were 38.63. The latent time of RK-temperate phage was 30 minutes and the burst size was 70-80. And the host bacteria was lysed in case of multi-infection, above moi 1.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.590-595
• /
• 2004

The shape and size variations of the nanopatterns produced on a positive photoresist using a near-field scanning optical microscope(NSOM) are investigated with respect to the process variables. A cantilever type nanoprobe having a 100nm aperture at the apex of the pyramidal tip is used with the NSOM and a He-Cd laser at a wavelength of 442nm as the illumination source. Patterning characteristics are examined for different laser beam power at the entrance side of the aperture( $P_{in}$ ), scan speed of the piezo stage(V), repeated scanning over the same pattern, and operation modes of the NSOM(DC and AC modes). The pattern size remained almost the same for equal linear energy density. Pattern size decreased for lower laser beam power and greater scan speed, leading to a minimum pattern width of around 50nm at $P_{in}$ =1.2$\mu$W and V=12$\mu$m/. Direct writing of an arbitrary pattern with a line width of about 150nm was demonstrated to verify the feasibility of this technique for nanomask fabrication. Application on high-density data storage using azopolymer is discussed at the end.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.302-304
• /
• 2007

전세계적으로 에너지난과 환경오염난을 겪고 있는 가운데 최근 대체에너지에 대한 관심이 어느 때보다 높은 시기이다. 다양한 대체에너지 중에서도 태양광 에너지는 우리나라 환경에 적합해 많은 연구가 진행 중인 분야이다. 대부분의 태양광 발전 시장이 결정질 실리콘 태양전지가 차지하고 있으나 경제성의 한계로 인해 최근 염료감응형 태양전지가 이를 대체할 수 있는 전지로 주목받고 있다. 본 연구에서는 염료감응형 태양전지의 상대전극에 증착하는 백금층의 두께 변화가 가져오는 출력특성의 영향을 연구했다. 상대전극에 증착되는 백금 박막은 염료감응형 태양전지의 매커니즘에서 입사광의 반사와 전기화학적 촉매작용 역할을 하는 것으로 박막의 두께가 두꺼워지면 반사율이 증가해 염료 분자가 받는 에너지가 늘어날 것으로 예상했다. 상대전극에 백금 Sputtering하는 시간을 1분에서 최대 5분까지 차를 두어 상대전극의 백금 박막의 두께를 $50nm{\sim}250nm$로 변화를 주어 측정한 결과, 250nm의 백금 박막층을 갖는 염료감응형 태양전지보다 백금 박막층이 150nm의 두께를 가질 때 가장 좋은 효율을 출력한다는 것을 알 수 있었다. 이를 통해 상대전극의 백금 박막층에 의한 거울 효과와 촉매작용의 한계와 전자의 흐름 장애에 대한 결과를 얻을 수 있었다.

• 한국운동역학회지
• /
• 제14권2호
• /
• pp.121-138
• /
• 2004

The design of soccer studs is important for providing friction on a variety of surfaces. We hypothesized that a certain type of soccer studs could improve performance due to high rotational friction. Thus, this study was conducted to determine the relationship between the frictional characteristics and different soccer stud design. Twelve recreational soccer players were recruited. Rotational friction data from the force plate was collected for all subjects during normal walking with 180 degree rotation. Walking speed was controlled at 1.2m/s (${\pm}\;0.1\;m/s$) with timing lights on infilled artificial turf. Three different types of soccer studs and one running shoe were tested. Repeated measures ANOVA was used to determine significance. Significant differences were found in rotational friction with four different shoes. Trx and World studs tended to have greater maximum rotational friction than the running shoe (Nova) and traditional soccer shoe(Copa Mondial). The results were as follow : world(25.95Nm) > trx(25.74Nm) > copa(22.50Nm) > nova(16.36Nm). The difference may be due to the number, location, size, and shape of studs. We concluded that stud design influences rotational friction between the shoe and surface during movement. Based on studs design and contact area, Trx with blade type studs are recommended since it showed high rotational friction for performance as well as enough contact area for stability. However, differences due to the mechanical properties of soccer studs are still being investigated.

• 한국재료학회지
• /
• 제17권6호
• /
• pp.323-330
• /
• 2007

We fabricated thermaly evaporated 10 nmNi/(poly)Si films to investigate the energy saving property of silicides formed by rapid thermal annealing (RTA) at the temperature of $300{\sim}1200^{\circ}C$ for 40 seconds. Moreover, we fabricated $10{\sim}50$ nm-thick ITO/Si films with a rf-sputter as reference films. A four-point tester was used to investigate the sheet resistance. A transmission electron microscope (TEM) and an X-ray diffractometer were used for the determination of cross sectional microstructure and phase changes. A UV-VISNIR and FT-IR (Fourier transform infrared rays spectroscopy) were employed for near-IR and middle-IR absorbance. Through TEM analysis, we confirmed $20{\sim}70nm-thick$ silicide layers formed on the single and polycrystalline silicon substrates. Nickel silicides and ITO films on the single silicon substrates showed almost similar absorbance in near-IR region, while nickel silicides on polycrystalline silicon substrate showed superior absorbance above 850 nm near-IR region to ITO films. Nickel silicide on polycrystalline substrate also showed better absorbance in middle IR region than ITO. Our result implies that nano-thick nickel silicides may have exellent absorbing capacity in near-IR and middle-IR region.

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.641-644
• /
• 2009

We have studied on the microwave characteristics for the meander type inductors on the MgO substrates and $Al_2O_3$ substrates by employing 3-D high frequency simulation, respectively. Proper designs of meander type inductors were proposed and confirmed through the high frequency simulations, 5, 7, 9, 11, and 13 turns meander type inductors have been choose to analyze the electrical properties for the microwave passive component applications. The Al top electrodes have 282 nm length, 45 nm width, 100 nm thickness and 15 nm gap. The simulations were carried out from 50 MHz to 30 GHz, Frequency dependent inductances and quality factor were calculated by employing the equivalent circuit model of meander type inductors. The self resonances frequency of meander type inductor were shifted from high frequency to low frequency range as the number of the turn of inductors was increased. From the microwave simulations, the inductances and quality factors of meander type inductors were extracted through the scattering parameter.

• 한국환경과학회지
• /
• 제25권3호
• /
• pp.373-383
• /
• 2016

The aim of this study is to determine the exposure concentration of tetrabromobisphenol A(TBBPA) in southwestern coast and their photodecomposition rate. Also, it is to identify the radical species of the photodecomposition of TBBPA and their reactive byproducts using the electron spin resonance(ESR) method. TBBPA was not detected in any of the sea water samples from Mokpo, Gunsan, or Goheung. The sediment samples from Mokpo contained not detection(N.D)~50.0 ng/g dry wt., while those from Gunsan contained N.D~28.5 ng/g dry wt. and those from Goheung contained N.D~7.3 ng/g dry wt. The photodecomposition rates were $2.56{\times}10^{-6}/hr$ by visible light(400 nm), $7.98{\times}10^{-6}/hr$ by ultraviolet light(300 nm <), and $6.78{\times}10^{-6}/hr$ by sunlight. Also, we confirmed that singlet oxygen and hydroxyl radicals are the key reactive oxygen species at wavelengths greater than 400 and 300 nm, respectively. This study shows that the main byproducts formed during irradiation at wavelengths above 300 nm are 2,6-dibromobenzosemiquinone radical(2,6-$DBSQ{\cdot}^-$) and g-value 2.0048 doublet spectrum.

• 한국염색가공학회지
• /
• 제11권2호
• /
• pp.38-45
• /
• 1999

Natural red colorants were extracted from Phytolacca americana Linne by using 50% ethanol solution at room temperature for 12 hours. The colorant components were partially purified as yellow and deep red colorants by thin layer chromatography. Natural red colorants were consisted of major water-soluble red colorant, having maximum absorbance at 538nm and alcohol-soluble yellow colorant, having maximum absorbance at 664nm. Concentration of red colorants were calibrated by the equation of dye(mg/ml) $A_{538nm}\times{1.284}$. Red colorants were changed to yellow at extreme alkali pH and repaired 55% color intensity by neutralization of pH and stabled below $55^\circ{C}$. Dyeability of red colorants against wool fabrics was mainly operated by red pigment having 538nm absorbance without big color differences. Below $55^\circ{C}$, color differences $(\Delta{E}^*_{ab})$ were not changed in spite of big difference of chroma$(c^*)$, having higher scores at higher temperature. The effect of mordants were not drastically changed parameters of color difference without copper ion. Citric acid was big changes of color difference$(\Delta{E}^*_{ab})$ in spite of similar chroma$(c^*)$ values. From these experimental results, red colorants from Phytolacca americana Linne is available for wool fabric dyeing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.69-71
• /
• 2009

Meander 형태의 인덕터를 각각 산화마그네슘 (MgO)기판과 산화 알루미늄 ($Al_2O_3$) 기판 위에 구현하여 고주파 특성을 구조 시뮬레이션을 통해 연구하였다. 고주파 시뮬레이션을 통해서 적절한 구조의 meander 형태의 인덕터를 선정하여 시뮬레이션을 수행하였다. 시뮬레이션시 사용된 알루미늄 상부전극은 길이 282 nm, 폭 45 nm, 두께 100 nm, 간격은 15 nm의 구조 였으며, 5, 7, 9, 11, 13턴의 meander 형태 인덕터 소자들을 이용하여 고주파 수동소자 응용을 위한 고주파 구조 시뮬레이션을 50 MHz에서부터 30 GHz까지 수행하였다. 주파수에 따른 인덕턴스와 품질계수를 등가회로를 이용하여 계산하였다. 시뮬레이션으로부터 자기공진주파수 (SRF, self resonance frequency)가 인덕터의 턴 수가 증가함에 따라 저주파 영역으로 이동하는 것을 확인하였고, 고주파 시뮬레이션 결과에서 산란 매개변수 (S-parameter, $S_{21}$)로부터 인덕턴스와 품질계수를 추출해내었다.