• 한국의사학회지
• /
• 제36권2호
• /
• pp.89-98
• /
• 2023

Objectives: This study applied Havruta, a learner-centered educational method, and verified its effectiveness, to break from the existing mechanical memorization methods of scripture reading classes, which are basic subjects of East Asian medicine at East Asian medicine universities. Method: To this end, D University's scripture reading course was redesigned according to Havruta's teaching model, and Havruta classes were conducted according to the instructional design. Results: As a result of the class, students' Chinese translation ability improved, and they were able to concentrate on class (M=4.24). Through class, they acquired knowledge in the field (M=4.21) and their ability to communicate with others improved (M=4.21). M=4.25), it can be inferred and interpreted that the learner is engaged. Conclusion: The results of this study are examples of applying various teaching and learning methods required in the East Asian medicine evaluation and certification of East Asian medicine at East Asian medicine universities, and can be used as practical basic data that can be applied not only to scripture reading subjects but also to other subjects.

• 대한수학회논문집
• /
• 제32권4호
• /
• pp.1077-1097
• /
• 2017

In this research article, we introduce certain concepts, including domination, total domination, strong domination, weak domination, edge domination and total edge domination in m-polar fuzzy graphs. We describe these concepts by several examples. We investigate some related properties of certain dominations in m-polar fuzzy graphs. We also present a decision making method based on domination in m-polar fuzzy graphs.

• 한국농공학회지
• /
• 제33권4호
• /
• pp.105-120
• /
• 1991

This study was performed to investigate the minimum safety factor of embankment in consideration of seismic coefficient by the psuedo-static analysis The variables were cohesion, the internal friction angle, angle of slope, height of seepage, height of embankment, depth of replacement The results obtained were compared with those by Fellenius method, simplified Bishop method and Janbu method. The results were summarized as follows: 1.The increasing rate of the minimum safety factor with the increasing of cohesion appeared larger in Fellenius method and Bishop method than in Janbu method. And that with the increasing of the internal friction angle appeared the lowest value in Janbu method. The minimum safety factor was influenced larger on the internal friction angle than on cohesion. 2.The variation of the minimum safety factor with the height of seepage at 0m and 5 m was nearly similar to Fellenius method, Bishop method and Janbu method. On the other hand, it was decreased suddenly at 25 m. 3.The minimum safety factor with the height of embankment was decreased remarkably under 10 m with the increasing of seismic coefficient. But, it was decreased slowly more than 10 m. As the height of embankment was low, the influence of cohesion appeared larger. 4.In heigher case of the depth of replacement, the phenomenon of reduction of the minimum safety factor appeared remarkably with seismic coefficient increased. And in lower case of the depth of replacement, the minimum safety factor was similar in Fellenius method and Bishop mehtod. But it appeared larger in Bishop method and Janbu method than in Fellenius method with the depth of replacement increased. 5.As the cohesion and the internal friction angle were large, the phenomenon of reduction of the minimum safety factor with the increasing of seismic coefficient appeared remarkably. Also, the influence of seismic coefficient in minimum safety factor appeared larger with the soil parameter increased. 6.When the seismic coefficient was considerated, investigation of the structural body on the slope stability appeared profitably in Fellenius method and Janbu method than in Bishop method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.833-836
• /
• 2007

최근 인터넷의 확산과 시스템 성능 향상으로 멀티미디어 데이터 전송을 위한 정보보호의 관점이 대두됨에 따라 안정적인 디지털 암호화에 따른 복호화 방법론이 절실하게 요구되고 있다. 본 논문에서는 컬러 영상 데이터 전송시 기존의 복호화 방법에 영상 데이터의 각 프레임에 대한 복호화 기법을 제안한다. 또한 보다 빠른 복호화 방법으로 각 프레임에 대한 유한체 $GF(2^m)$ 역산의 4bit 이진화를 통한 컬러 영상의 복호화 방법을 제안한다.

• 한국식품위생안전성학회지
• /
• 제34권3호
• /
• pp.277-282
• /
• 2019

본 연구에서는 한국 전통 식품에서 Salmonella Typhimurium와 Listeria monocytogenes의 검출에 대하여 LAMP에 기반한 3M Molecular Detection Assay 2 (3M MDA 2)와 식품공전에 등재된 분리배지, real-time PCR의 검출 성능을 비교하고자 하였다. 육회와 육사시미에 $10^0-10^4CFU/25g$의 수준으로 S. Typhimurium와 L. monocytogenes을 각각 접종하였다. Citrobacter freundii와 Listeria innocua는 S. Typhimurium와 L. monocytogene의 검출에 영향을 주는 균으로 사용하였다. S. Typhimurium와 L. monocytogenes만 $10^0-10^4CFU/25g$ 수준으로 접종한 모든 시료에서는 분리배지, real-time PCR과 LAMP에서 양성으로 검출되었다. C. freundii와 L. innocua를 같이 접종한 경우에서 부분적으로 양성이 나타났다. 육회와 육사시미에 대하여 real-time PCR 보다 3M MDA 2가 더 검출효율이 높음을 알 수 있었다. 분리배지가 가장 검출효율이 높았지만 3M MDA 2와 큰 차이가 없었다. 배지를 사용하는 방법은 최소 일주일의 시간이 소요되고 PCR의 경우 inhibitor의 영향을 많이 받아 정확한 검출이 어려운 점이 있다. 그러나 LAMP에 기반한 3M MDA 2는 enrichment 후 다음 날 간단한 protocol을 통해 25분 이내로 샘플의 양성 반응을 확인할 수 있어 식중독균에 대해 신속하고 정확한 검출이 가능한 것으로 판단되었다.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.88-94
• /
• 2013

In university laboratories, areas of studies are becoming diverse and complicated according to the development of the industry. New forms of potential risk factors are increasing and they are unlike existing ones. In addition, many students are conducting various experiments in the laboratory. Therefore, they could be exposed to risk more often. Despite these risks, people do not recognize university lab safety activities properly and observe safety precautions. They are exposed to various laboratory accidents continually. In this study, we do not apply the present diagnosis method, checklist, but the safety assessment that is widely used in industry. Then we can find lots of hazard that checklist method could miss. This study will use the 4M and Hazard & Operability to design a new Laboratory safety assessments method.

• The Journal of Advanced Prosthodontics
• /
• 제5권1호
• /
• pp.36-43
• /
• 2013

PURPOSE. The objective of this study was to compare the fracture toughness ($K_{Ic}$) obtained from the single edge V-notched beam (SEVNB) and the fractographic analysis (FTA) of a glass-infiltrated and a zirconia ceramic. MATERIALS AND METHODS. For each material, ten bar-shaped specimens were prepared for the SEVNB method ($3mm{\times}4mm{\times}25mm$) and the FTA method ($2mm{\times}4mm{\times}25mm$). The starter V-notch was prepared as the fracture initiating flaw for the SEVNB method. A Vickers indentation load of 49 N was used to create a controlled surface flaw on each FTA specimen. All specimens were loaded to fracture using a universal testing machine at a crosshead speed of 0.5-1 mm/min. The independent-samples t-test was used for the statistical analysis of the $K_{Ic}$ values at ${\alpha}$=0.05. RESULTS. The mean $K_{Ic}$ of zirconia ceramic obtained from SEVNB method ($5.4{\pm}1.6\;MPa{\cdot}m^{1/2}$) was comparable to that obtained from FTA method ($6.3{\pm}1.6\;MPa{\cdot}m^{1/2}$). The mean $K_{Ic}$ of glass-infiltrated ceramic obtained from SEVNB method ($4.1{\pm}0.6\;MPa{\cdot}m^{1/2}$) was significantly lower than that obtained from FTA method ($5.1{\pm}0.7\;MPa{\cdot}m^{1/2}$). CONCLUSION. The mean $K_{Ic}$ of the glass-infiltrated and zirconia ceramics obtained from the SEVNB method were lower than those obtained from FTA method even they were not significantly different for the zirconia material. The differences in the $K_{Ic}$ values could be a result of the differences in the characteristics of fracture initiating flaws of these two methods.

• The Journal of Advanced Prosthodontics
• /
• 제10권4호
• /
• pp.321-327
• /
• 2018

PURPOSE. The purpose of this study was to compare the cutting method and the lamination method to investigate whether the CAD data of the proposed inlay shape are machined correctly. MATERIALS AND METHODS. The Mesial-Occlusal shape of the inlay was modeled by changing the stereolithography (STL). Each group used SLS (metal powder) or SLA (photocurable resin) in the additive method, and wax or zirconia in the subtractive method (n=10 per group, total n=40). Three-dimensional (3D) analysis program (Geomagic Control X inspection software; 3D systems) was used for the alignment and analysis. The root mean square (RMS) in the 2D plane state was measured within $50{\mu}m$ radius of eight comparison measuring points (CMP). Differences were analyzed using one-way analysis of variance and post-hoc Tukey's test were used (${\alpha}=.05$). RESULTS. There was a significant difference in RMS only in SLA and SLS of 2D section (P<.05). In CMP mean, CMP 4 ($-5.3{\pm}46.7{\mu}m$) had a value closest to 0, while CMP 6 ($20.1{\pm}42.4{\mu}m$) and CMP 1 ($-89.2{\pm}61.4{\mu}m$) had the greatest positive value and the greatest negative value, respectively. CONCLUSION. Since the errors obtained from the study do not exceed the clinically acceptable values, the lamination method and the cutting method can be used clinically.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.386-391
• /
• 2006

Though a variety of demands for an green dwelling, it is hard to diffuse a wooden house due to high construction cost. So this study aims to diffuse to propose a space modular for production and supply. Therefore the result of investigation to the space modular of each room through the survey of width and depth in the type of dwelling in korea is as follows. 1) Investigated the mixture of magnitude on the total width and depth, the survey is showed commonly 3.6m and 4.2m. 2) Once the depth is 3.6m, a living room and inner room, room's width is 3.9m, 4.5m. Once the depth is 4.2m, those width is 4.8m. 3) By use of a survey, the post distances consisted of all rooms are 3.6m, 3.9m, 4.2m, 4.5m, 4.8m. The result of investigation to possibility for mixture applied to six level types invested post modules to the wooden house of post & Beam method is as follows. 1) With the regularity of depth and simplicity of width, It is potential to compound floor plan in korea. 2) It is possible to plan an informal shape of kitchen+dining room which is a spare space available for the merit changeable space after arranged main rooms. 3) It is possible to plan a space through a variety of mixture method at bathroom. Thus, it is possible for a variety of floor formations to build a low-cost wooden house through five types of post distance.

• Advances in nano research
• /
• 제10권3호
• /
• pp.295-312
• /
• 2021

A new ionic liquid functionalized magnetic silica nanoparticle was synthesized and characterized and tested as an adsorbent. The adsorbent was used for magnetic solid phase extraction on ICP-MS method. Simultaneous determination of precious metal Au has been addressed. The method is simple and fast and has been applied to standard water and surface water analysis. A new method for separation/analysis of trace precious metal Au by Magnetron Solid Phase Extraction (MSPE) combined with ICP-MS. The element to be tested is rapidly adsorbed on CoFe2O4@SiO2@[BMIM]PF6 composite nano-adsorbent and eluted with thiourea. The method has a preconcentration factor of 9.5-fold. This method has been successfully applied to the determination of gold in actual water samples. Hydrophobic Ionic Liquids (ILs) 1-butyl-3-methylimidazole hexafluorophosphate ([BMIM]PF6) coated CoFe2O4@SiO2 nanoparticles with core-shell structure to prepare magnetic solid phase extraction agent (CoFe2O4@SiO2@ILs) and establish a new method of MSPE coupled with inductively coupled plasma mass spectrometry for separation/analysis of trace gold. The results showed that trace gold was adsorbed rapidly by CoFe2O4@SiO2@[BMIM]PF6 and eluanted by thiourea. Under the optimal conditions, preconcentration factor of the proposed method was 9.5-fold. The linear range, detection limit, correlation coefficient (R) and relative standard deviation (RSD) were found to be 0.01~1000.00 ng·mL-1, 0.001 ng·mL-1, 0.9990 and 3.4% (n = 11, c = 4.5 ng·mL-1). The CoFe2O4@SiO2 nanoparticles could be used repeatedly for 8 times. This proposed method has been successfully applied to the determination of trace gold in water samples.