• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.180-184
• /
• 2018

산화갈륨 ($Ga_2O_3$)과 탄화규소 (SiC)는 넓은 밴드 갭 ($Ga_2O_3-4.8{\sim}4.9eV$, SiC-3.3 eV)과 높은 임계전압을 갖는 물질로서 높은 항복 전압을 허용한다. 수직 DMOSFET 수평구조에 비해 높은 항복전압 특성을 갖기 때문에 고전압 전력소자에 많이 적용되는 구조이다. 본 연구에서는 2차원 소자 시뮬레이션 (2D-Simulation)을 사용하여 $Ga_2O_3$와 4H-SiC 수직 DMOSFET의 구조를 설계하였으며, 항복전압과 저항이 갖는 trade-off에 관한 파라미터를 분석하여 최적화 설계하였다. 그 결과, 제안된 4H-SiC와 $Ga_2O_3$ 수직 DMOSFET구조는 각각 ~1380 V 및 ~1420 V의 항복 전압을 가지며, 낮은 게이트 전압에서의 $Ga_2O_3-DMOSFET$이 보다 낮은 온-저항을 갖고 있지만, 게이트 전압이 높으면 4H-SiC-DMOSFET가 보다 낮은 온-저항을 갖을 수 있음을 확인하였다. 따라서 적절한 구조와 gate 전압 rating에 따라 소자 구조 및 gate dielectric등에 대한 심화 연구가 요구될 것으로 판단된다.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.619-625
• /
• 2020

본 논문에서는 Trench를 이용하여 기존 C-DMOSFET(Conventional DMOSFET)과 S-DMOSFET(Shielded DMOSFET) 구조보다 더 깊은 영역에 P+ shielding을 형성한 TS-DMOSFET(Trench Shielded DMOSFET) 구조를 제안하였으며 TCAD 시뮬레이션을 통해 C- 및 S-DMOSFET 구조와 전기적 특성을 비교하였다. 제안한 구조는 Source에 Trench를 형성한 후 도핑을 진행하므로 SiC 물질 특성과 관계없이 깊은 영역에 P+ shielding을 형성할 수 있다. 이로 인해 P-base에 인가되는 전압이 감소하여 리치스루 효과가 완화되었다. 그 결과 세 구조 모두 3.3kV의 항복 전압을 가질 때 제안한 구조의 온저항은 9.7mΩ㎠으로 C-DMOSFET과 S-DMOSFET의 온저항인 30.5mΩ㎠, 19.3mΩ㎠ 대비 각각 68%, 54% 개선된 온저항을 갖는다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.63-63
• /
• 2009

In this work, we demonstrate 800V 4H-SiC power DMOSFETs with several structural alterations to observe static DC characteristics, such as a threshold voltage ($V_{TH}$) and a figure of merit ($V_B^2/R_{SP,ON}$). To optimize the static DC characteristics, we consider four design parameters; (a) the doping concentration ($N_{CSL}$) of current spreading layer (CSL) beneath the p-base region, (b) the thickness of p-base ($t_{BASE}$), (c) the doping concentration ($N_J$) and width ($W_J$) of a JFET region, (d) the doping concentration ($N_{EPI}$) and thickness ($t_{EPI}$) of epi-layer. Design parameters are optimized using 2D numerical simulations and the 4H-SiC DMOSFET structure results in high figure of merit ($V_B^2/R_{SP,ON}$>~$340MW/cm^2$) for a power MOSFET in $V_B{\sim}1200V$ range.

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.637-640
• /
• 2009

In this work, we demonstrate 800 V 4H-SiC power DMOSFETs with several structural alterations to obtain a low threshold voltage ($V_{TH}$) and a high figure of merit ($V_B\;^2/R_{SP,ON}$), To optimize the device performance, we consider four design parameters; (a) the doping concentration ($N_{CSL}$) of current spreading layer (CSL) beneath the p-base region, (b) the thickness of p-base ($t_{BASE}$), (c) the doping concentration ($N_J$) and width ($W_J$) of a JFET region, (d) the doping concentration ($N_{EPI}$) and thickness ($t_{EPI}$) of epi-layer. These parameters are optimized using 2D numerical simulation and the 4H-SiC DMOSFET structure results in a threshold voltage ($V_{TH}$) below $^{\sim}$3.8 V, and high figure of merit ($V_B\;^2/R_{SP,ON}$>$^{\sim}$200 $MW/cm^2$) for a power MOSFET in $V_B\;^{\sim}$800 V range.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.832-838
• /
• 2019

본 논문에서는 차세대 전력 반도체 소자인 4H-SiC MOSFET에 대해 연구하였다. 특히 3300V급에서 기존의 DMOSFET 구조보다 개선된 전기적 특성을 갖는 Semi-SuperJunction MOSFET 구조를 제안하였으며, TCAD 시뮬레이션을 통해 기존의 MOSFET과 전기적 특성을 비교 분석하였다. Semi-SJ MOSFET 구조는 부분적으로 SJ를 도입한 구조로, 2차원의 공핍 효과를 통해 전계 분포가 개선되며, 항복 전압이 증가한다. 항복 전압의 개선을 통해 얻은 이득으로, 높은 농도의 도핑이 가능하기 때문에 온 저항을 개선시킬 수 있다. 제안한 Semi-SJ MOSFET 구조는 DMOSFET보다 항복 전압이 8% 감소하지만, 온 저항이 80% 감소한다. 또한 DMOSFET 구조를 개선한 Current Spreading Layer(CSL)구조에 비해서도 온 저항이 44% 감소한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.35-36
• /
• 2009

In this work, we demonstrate 800V 4H-SiC power DMOSFETs with several structural alterations to obtain a low threshold voltage ($V_{TH}$) and a high figure of merit ($V_B^2/R_{SP,ON}$). To optimize the device performance, we consider four design parameters; (a) the doping concentration ($N_{CSL}$) of current spreading layer (CSL) beneath the p-base region, (b) the thickness of p-base ($t_{BASE}$), (c) the doping concentration ($N_J$) and width ($W_J$) of a JFET region, (d) the doping concentration ($N_{EPI}$) and thickness ($t_{EPI}$) of epi-layer. These parameters are optimized using 2D numerical simulation and the 4H-SiC DMOSFET structure results in a threshold voltage ($V_{TH}$) below ~3.8V, and high figure of merit ($V_B^2/R_{SP,ON}$>${\sim}200MW/cm^2$) for a power MOSFET in $V_B$-800V range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.352-352
• /
• 2010

Silicon Carbide (SiC) power device possesses attractive features, such as high breakdown voltage, high-speed switching capability, and high temperature operation. In general, device design has a significant effect on the switching characteristics. In this paper, we report the effect of the P-base doping concentration ($N_{PBASE}$) on the transient characteristics of 4H-SiC DMOSFETs. By reducing $N_{PBASE}$, switching time also decreases, primarily due to the lowered channel resistance. It is found that improvement of switching speed in 4H-SiC DMOSFETs is essential to reduce the and channel resistance. Therefore, accurate modeling of the operating conditions are essential for the optimization of superior switching performance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.131-131
• /
• 2009

Silicon Carbide (SiC) is a material with a wide bandgap (3.26eV), a high critical electric field (~2.3MV/cm), a and a high bulk electron mobility ($\sim900cm^2/Vs$). These electronic properties allow high breakdown voltage, high-speed switching capability, and high temperature operation compared to Si devices. Although various SiC DMOSFET structures have been reported so far for optimizing performances, the effect of channel dimension on the switching performance of SiC DMOSFETs has not been extensively examined. This paper studies different channel dimensons ($L_{CH}$ : $0.5{\mu}m$, $1\;{\mu}m$, $1.5\;{\mu}m$) and their effect on the the device transient characteristics. The key design parameters for SiC DMOSFETs have been optimized and a physics-based two-dimensional (2-D) mixed device and circuit simulator by Silvaco Inc. has been used to understand the relationship. with the switching characteristics. To investigate transient characteristic of the device, mixed-mode simulation has been performed, where the solution of the basic transport equations for the 2-D device structures is directly embedded into the solution procedure for the circuit equations. We observe an increase in the turn-on and turn-off time with increasing the channel length. The switching time in 4H-SiC DMOSFETs have been found to be seriously affected by the various intrinsic parasitic components, such as gate-source capacitance and channel resistance. The intrinsic parasitic components relate to the delay time required for the carrier transit from source to drain. Therefore, improvement of switching speed in 4H-SiC DMOSFETs is essential to reduce the gate-source capacitance and channel resistance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.37-38
• /
• 2009

SiC power device possesses attractive features, such as high breakdown voltage, high-speed switching capability, and high temperature operation. In general, device design has a significant effect on the switching characteristics. It is known that in SiC power MOSFET, the JFET region width is one of the most important parameters. In this paper, we demonstrated that the switching performance of DMOSFET is dependent on the with width of the JFET region by using 2-D Mixed-mode simulations. The 4H-SiC DMOSFETs with a JFET region designed to block 800 V were optimized for minimum loss by adjusting the parameters of the n JFET region, CSL, and n-drift layer. It has been found that the JFET region reduces specific on-resistance and therefore the switching characteristics depend on the JFET region.

• Journal of Electrical Engineering and Technology
• /
• 제7권2호
• /
• pp.236-239
• /
• 2012

In this paper, we study the transient characteristics of 4H-SiC DMOSFETs with different interface charges to improve the turn-on rising time. A physics-based two-dimensional mixed device and circuit simulator was used to understand the relationship between the switching characteristics and the physical device structures. As the $SiO_2$/SiC interface charge increases, the current density is reduced and the switching time is increased, which is due primarily to the lowered channel mobility. The result of the switching performance is shown as a function of the gate-to-source capacitance and the channel resistance. The results show that the switching performance of the 4H-SiC DMOSFET is sensitive to the channel resistance that is affected by the interface charge variations, which suggests that it is essential to reduce the interface charge densities in order to improve the switching speed in 4H-SiC DMOSFETs.