• ETRI Journal
• /
• v.44 no.3
• /
• pp.462-475
• /
• 2022

Although researchers have proposed numerous techniques for speech emotion recognition, its performance remains unsatisfactory in many application scenarios. In this study, we propose a speech emotion recognition model based on a genetic algorithm (GA)-decision tree (DT) fusion of deep and acoustic features. To more comprehensively express speech emotional information, first, frame-level deep and acoustic features are extracted from a speech signal. Next, five kinds of statistic variables of these features are calculated to obtain utterance-level features. The Fisher feature selection criterion is employed to select high-performance features, removing redundant information. In the feature fusion stage, the GA is is used to adaptively search for the best feature fusion weight. Finally, using the fused feature, the proposed speech emotion recognition model based on a DT support vector machine model is realized. Experimental results on the Berlin speech emotion database and the Chinese emotion speech database indicate that the proposed model outperforms an average weight fusion method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1348-1351
• /
• 2009

패킷 재배치(packet reodering)는 전송한 패킷의 순서가 처음과 다르게 뒤섞여 수신지에 도착하는 현상을 의미한다. 패킷 재배치는 불필요한 재전송이나 불필요한 혼잡 제어를 수행하여 TCP의 성능을 저하시킨다. 패킷 재배치에 의한 TCP 성능 저하를 막기 위해 다양한 접근 방법이 소개되었다. TCP-DAD는 기존 TCP에서 3으로 고정된 중복 응답 임계값을 동적으로 조절하여, 잘못된 혼잡 제어를 예방하고 있다. 일반적으로 전송한 패킷의 수가 많을 때, 패킷 재배치를 경험할 확률이 높으며, 패킷 재배치에 의해 잘못된 혼잡 제어가 일어날 가능성 많다. 고속 네트워크 환경에서는 혼잡 윈도우 크기 변화의 폭이 매우 크다는 점을 고려할 때, 중복 응답 임계값을 조절하는 TCP-DAD는 한계가 있다. 본 논문에서는 고속 네트워크 환경에서의 패킷 재배치 현상으로 인한 TCP 성능저하를 완화하기 위한 새로운 알고리즘 TCP-DT를 소개한다. 이는 중복 응답 수에 의존하지 않고 타이머를 통해 혼잡 제어를 수행하는 메커니즘 이다. 본 논문은 NS-2를 사용하여 고속 네트워크 환경에서의 시뮬레이션을 통해 제안한 TCP-DT의 성능 향상을 증명하였다.

• ETRI Journal
• /
• v.45 no.3
• /
• pp.543-550
• /
• 2023

Electrostatic discharge (ESD) testing for human body model tests is an essential part of the reliability evaluation of electronic/electrical devices and components. However, global environmental concerns have called for the need to replace the mercury-wetted relay switches, which have been used in ESD testers. Therefore, herein, we propose an ESD tester using metal oxide semiconductor-controlled thyristor (MCT) devices with a significantly higher rising rate of anode current (di/dt) characteristics. These MCTs, which have a breakdown voltage beyond 3000 V, were developed through an in-house foundry. As a replacement for the existing mercury relays, the proposed ESD tester with the developed MCT satisfies all the requirements stipulated in the JS-001 standard for conditions at or below 2000 V. Moreover, unlike traditional relays, the proposed ESD tester does not generate resonance; therefore, no additional circuitry is required for resonant removal. To the best of our knowledge, the proposed ESD tester is the first study to meet the JS-001 specification by applying a new switch instead of an existing mercury-wetted relay.

• Journal of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.271-283
• /
• 1972

The rate Constants and energies of activation for the Combustion reaction of Korean anthracites have obtained by DTA method using the following rate equation derived by authors. $K=\frac{C_3{\cdot}W_0}{{\Delta}H{\cdot}{\Delta}C{\cdot}M{\cdot}S_A}(\frac{dy}{dt}+A(y-y_3))$ The anthracites of various ranks were treated at the different temperatures in the furnace. The probable combustion reaction mechanisms have discussed with the results obtained by the X-ray diffraction method, IR spectroscophic analysis, and gas chromatography. By the intensity of d(002) Values, it was confirmed that a parts of the amorphous carbon was converted to graphite form by heat treatment. The appreciable amounts of CO gas were expelled in the combustion process and it appeared that a little amount of the gas came from the catalytic decomposition of anthracites, The functional groups such as -OH, -SH, -NH, $-CH_2-CH_3,$ -CO, -COC-. and polycondensed aromatic rings in anthracites have observed by IR spectrophotometric analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.609-616
• /
• 2014

Large linear span makes difficult to predict, so this study is important to the security and code system. It has been studied about the non-linear binary sequences having low correlation values and large linear span. In this paper we analyze the linear span of $S^r_a(t)=Tr^m_1\{[Tr^n_m(a{\alpha}^t+{\alpha}^{dt})]^r\}$ ($a{\in}GF(2^m)$, $0{\leq}t{\leq}2^m-2$) where n=2m and $d=2^{m-2}(2^m+3)$.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.629-637
• /
• 2023

This study aimed to evaluate the effect of post-curing equipment and time on the flexural strength of 3D printing resins produced by a liquid crystal display(LCD) printer. The three 3D printing resins(DENTCA Denture Teeth, DT; C&B 5.0 hybrid, CH; C&B Permanent A2, CP) were divided into four groups according to post-curing time(10 min and 30 min) and equipment with or without vacuum treatment. For the three-point flexural strength test and biaxial strength test were prepared by method according to ISO 10477, ISO 6872, respectively. Flexural strength was measured with universal testing machine. Comparison between post-curing time of each post-curing equipment was analyzed by independent sample t-test and Mann-Whitney U test(α=.05), and comparison between groups according to each 3D printing resin was performed by Kruskal-Wallis test and post-hoc by Bonferroni-Dunn test(α=.05). The flexural strength of the resin post-curing under vacuum was higher than that of the resin post-curing in air. In the comparison according to the post-curing time, in the case of the post-curing equipment without vacuum, the 30 minute curing time showed significantly higher flexural strength than the 10 minute curing time, except for the biaxial flexural strength of CH(P<.05). In the post-curing equipment with vacuum, the three-point flexural strength of all 3D printing resins(DT, CH, and CP) showed a higher value at 30 minute curing time than at 10 minute curing time.

• Journal of dental hygiene science
• /
• v.6 no.2
• /
• pp.113-117
• /
• 2006

The purpose of this study was to evaluate caries preventive effects of a school-based weekly mouthrinsing program with a 0.2% sodium fluoride solution for five years at elementary school in Yangsan city, which were conducted for 330 children of elementary school from 2000 to 2005. The surveyed data was analyzed with SPSS statistical package. The obtained results were as follows; 1. DMF rate was 58.4% before the mouthrinsing program in 2000 and 48.3% after the program in 2005. DMF rate in 2005 decreased by 10.1% compared to DMF rate in 2000. 2. DT index was 2.46 before the mouthrinsing program and 1.70 after the program. DT index in 2004 decreased by 0.76 compared to DT index in 2000. 3. FT index was 0.55 before the mouthrinsing program and 0.37 after the program. Filled teeth due to decay after the program decreased by 0.18 compared to filled teeth before the program. 4. DMFT score was 2.61 before the mouthrinsing program and 1.64 after the program. DMFT score in 2004 decreased by 0.97 compared to DMFT score in 2000. 5. PHP index was 12.12 before the mouthrinsing program and 5.95 after the program. PHP index in 2005 decreased by 6.17 compared to PHP index in 2000.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.8 no.1
• /
• pp.1-9
• /
• 2012

Mobile oral exam at the facilities for the disabled in Seoul is to improve the oral health of the disabled who can hardly approach dental clinic. We analyzed 1609 oral exam records at 24 facilities (11 special-education schools, 10 living facilities, 2 mental hospitals, 1 health care facility for the elderly) in 2011. The purpose of this study is to figure out the oral health state of the disabled in facilities in Seoul and to compare with the non-disabled in National Survey 2010 and 2008. 1. Special-education school : DMFT index of age 15 is 5.4 which is higher than 3.6 (DMFT index of age 15) of National Survey in 2010. 2. Living facility : DMFT index of ages 35~44 is 8.4 which is higher than 5.2 (DMFT index of ages 35 ~44) of National Survey in 2008. DT rate is higher (31.3% vs 19.2%) and MT rate is lower (7.6% vs 15.5%). 3. Mental hospital : DMFT index of ages 35~44 is 11.3 which is higher than 5.2 (DMFT indext of age 35~44) of National Survey in 2008. DT rate is significantly higher (50.7% vs 19.2%) and FT rate is lower (35.1% vs 65.3%). 4. Health care facility for the elderly : DMFT index of ages 65~74 is 7.1 which is slightly lower than 8.7 (DMFT index of ages 65~74) of National Survey in 2008. The number of existing natural teeth is similar (16 vs 18).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.478-487
• /
• 2003

In this paper, a type and special feature of Multi-level inverter used in medium-voltage and high-capacity motor driver is introduced. Especially, a power quality and structural advantages of H-Bridge Multi-level inverter is described. It presented the specific structure of power circuit, design method, controller composition and PWM techniques of the cascaded H-Bridge Multi-level inverter which is developed. The feasibility of the developed product based on 3,300V lMVA 7-level H-bridge inverter was studied by experiments and we get conclusion that 1)generate of near-sinusoidal output voltage; 2)is low dv/dt at output voltage; 3)reduce the harmonic injection at input; Experiment demonstrate that it is very economical in productivity because of using the existing production technique and examination equipment, and has the reliability and a good maintenance due to the structure of Power Cell unit combination as well as low cost IGBT.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.3
• /
• pp.241-247
• /
• 2020

Sesame is typically a temperature- and day length-sensitive plant, as its flowering is promoted under high temperature and shorter day length conditions. The experiment carried out in the present study revealed that day length influenced sesame flowering to a much greater extent than temperature. The degree of day length influence differed depending on the sesame variety. Days from sowing to flowering was negatively correlated with yield-related characteristics such as stem length, capsule number per plant, 1,000 seed weight, and seed weight per 10a. In cases where the period from sowing to flowering was longer and flowering date was later, the reproductive growth period was shorter during maturity. Analysis of the effects of temperature and day length on seed yield production revealed that temperature was a much more influential factor than day length. However, day length was more influential than temperature under low temperatures, such as 22℃. All varieties apart from Ansan were shown to be primarily influenced by temperature. Sesame varieties were grouped in view of optimal seed sowing time through principal components analysis. The Poongsung and Sungboon varieties favored early sowing under low temperatures and short day lengths. The DT45, Poongsung, 90 days, Ansan, and Sungboon varieties favored late sowing under high temperatures and long day lengths. The Yangbaek and Arum varieties could be sown both early and late.