• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.965-974
• /
• 2013

2011년 7월 27일 우면산 유역에서 일련의 토석류가 발생하여 많은 인명과 재산 피해를 야기했다. 이러한 토석류 피해를 저감하기 위해서는 토석류가 어떻게 이동하고 퇴적되어 하류부에 피해를 주는지를 예측할 수 있는 기술이 필요하다. 이 연구에서는 우면산 토석류에 대해서 FLO-2D 수치모형을 적용하여, 모형의 성능을 평가하고, 이들 토석류의 유동 매개변수를 분석하였다. 우면산 북측사면에서 발생한 토석류의 현장 관측자료와 FLO-2D 모의 결과 분석을 통해서 역산된 우면산 토석류의 대표 항복응력은 1,022 Pa 그리고 대표 동점성은 652 $Pa{\cdot}s$ 인 것으로 나타났다. 선정된 매개변수를 이용하여 우면산 토석류의 퇴적영역을 산정한 결과, 래미안 유역의 경우 63 - 85% 정확도의 피해유역을 재현됨으로서 FLO-2D 모형은 피해유역 산정에 적합한 것으로 나타났다. 하지만, FLO-2D 모형이 침식물질과 우수의 연행작용을 고려할 수 없는 고유의 한계 때문에 연행작용이 현저한 래미안 및 신동아 유역 토석류의 유하속도는 과소평가하는 것으로 나타났다. 유하부에서 침식에 의한 연행작용이 활발하지 않은 형촌마을 유역 토석류는 수로와 저수지 상부 부근에서의 퇴적을 우수한 정확도로 모의되었다. 민감도 분석 결과 유사체적농도와 바닥조도계수 모두 토석류의 흐름두께와 유속 모두에 상당한 영향을 미치는 것으로 나났으므로, 이들 매개변수의 선정에 신중해야 함을 보여주었다.

• 한국수자원학회논문집
• /
• 제55권1호
• /
• pp.33-42
• /
• 2022

본 연구에서는 3차원 상용 수치모형 Flow-3D를 활용하여 상류 수위(유입유량) 변동, 격벽의 간격(pool의 길이) 변화, 잠공 유무 등에 따른 아이스 하버 어도 내 흐름 양상을 분석하였다. 수치모의 결과의 적합성을 입증하기 위해 경안천 대곡교 하류에 설치된 실제 어도에서 3차원 초음파 유속계를 사용하여 어도 출구부 단면 유속과 유량을 관측하였다. Flow-3D 모형에는 난류 모듈로 4가지를 선택할 수 있는데, 관측 자료로 검증 결과 RNG 모형이 아이스하버 어도 내 흐름 특성을 가장 잘 재현하였다. 하천의 유량 전량이 어도로만 유입되어 흐른다는 조건에서 수위 변화에 따른 어도 내 유속구조를 모의해 보았다. 그 결과 최저수위에서는 잠입류와 표면류가 혼재하여 발생하였는데, 최저수위에서 약 10 cm 이상만 수위가 상승하여도 모든 pool에서 잠입류가 사라지고 오직 표면류만 발생하였다. 예상과 달리 수위가 조금 상승해도 흐름이 꽤 단순하게 표면류 위주로 발생하였다. 격벽간 간격을 늘려주면 수위가 상승하더라도 잠입류와 표면류가 혼재되어 나타나는 현상이 지속되었다. 그리고 격벽 하단에 잠공이 있는 경우가 없는 경우에 비해 잠입류가 여러 pool에서 생성되는 경향을 보였다. 보다 적극적인 어도 사후 관리로 잠공 폐색을 막아 어도 내 다양한 흐름이 생성될 수 있도록 유도하는 것이 필요해 보인다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.27-32
• /
• 2000

In this study, the three-dimensional blood flow within the sac of KTAH(Korean artificial heart) is simulated using fluid-structure interaction model. The numerical method employed in this study is the finite element commercial package ADINA. The thrombus formation is one of the most critical problems in KTAH. High fluid shear stress or stagnated flow are believed to be the main causes of these disastrous phenomenon. We solved the fluid-structure interaction between the 3D blood flow in the sac and the surrounding sac material. The sac material is assumed as linear elastic material and the blood as incompressible viscous fluid. Numerical solutions show that high shear stress region and stagnated flow are found near the upper part of the sac and near the comer of the outlet during diastole stage.

• Computers and Concrete
• /
• 제5권3호
• /
• pp.175-194
• /
• 2008

Increasingly numerical (finite element) modeling of concrete hinges on our ability to develop a representative volume element with all its heterogeneity properly discretized. Yet, despite all the sophistication of the ensuing numerical models, the initial discretization has been for the most part simplistic. Whenever the heterogeneity of the concrete is to be accounted for, a mesh is often manually crafted through the arbitrary inclusion of the particles (aggregates and/or voids) in an ad-hoc manner. This paper develops a mathematical strategy to precisely address this limitation. Algorithms for the random generation and placement of elliptical (2D) or ellipsoid (3D) inclusions, with possibly radiating cracks, in a virtual concrete model are presented. Collision detection algorithms are extensively used.

• 한국해안·해양공학회논문집
• /
• 제23권6호
• /
• pp.401-406
• /
• 2011

본 연구에서는 3차원 수치파동수조에서 무반사 조파시스템을 이용한 경사입사파의 조파방법을 새롭게 제안하고, 계산된 수면변위 및 수평유속에 대한 수치결과와 Stokes파의 3차 근사이론값과의 비교 분석을 통하여 새로운 모델의 검증을 실시하였다. 그 결과 본 연구에서 제안한 경사입사파의 조파방법의 타당성과 유효성을 확인할 수 있었다.

• 한국방재학회 논문집
• /
• 제5권3호
• /
• pp.73-82
• /
• 2005

본 연구에서는 도시하천의 통수능 확보를 위한 방안이 제시되었다 하천 좌우안을 따라 형성된 도로 하부를 통수능으로 사용하기 위해, 2차원 분석에 의해 통수단면의 제원에 따른 흐름특성을 검토하여 적합한 통수단면의 제원을 제시하였다. 주수로와 추가되는 통수단면간의 흐름 분석을 위해 2차원 수치 모형인 SMS를 이용하였고, SMS의 모형의 매개변수를 검정하기 위해 1차원 수치 모형인 HEC-RAS의 결과를 이용하였다. 제시된 통수능 확보 방안은 청계천 복원사업에 적용하였다. 50, 80, 200년 빈도 홍수에 대한 통수단면의 내수배제 능력을 검토하였으며, 적합한 통수단면의 제원을 제시하였다.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.1011-1025
• /
• 2017

The geological conditions surrounding the Jijiapo Tunnel of the Three Gorges Fanba Highway project in Hubei Province are very complex. In this paper, a 3-D physical model was carried out to study the evolution process of filling-type fracture water inrush and mud gush based on the conditions of the section located between 16.040 km and 16.042 km of the Jijiapo Tunnel. The 3-D physical model was conducted to clarify the effect of the self-weight of the groundwater level and tunnel excavation during water inrush and mud gush. The results of the displacement, stress and seepage pressure of fracture and surrounding rock in the physical model were analyzed. In the physical model the results of the model test show that the rock displacement suddenly jumped after sustainable growth, rock stress and rock seepage suddenly decreased after continuous growth before water inrushing. Once water inrush occured, internal displacement of filler increased successively from bottom up, stress and seepage pressure of filler droped successively from bottom up, which presented as water inrush and mud gush of filling-type fracture was a evolving process from bottom up. The numerical study was compared with the model test to demonstrate the effectiveness and accuracy of the results of the model test.

• 대한산업공학회지
• /
• 제22권3호
• /
• pp.387-398
• /
• 1996

In this study the cell arrival processes from pre-buffer into multiplexer for MPEG(Motion Picture Experts Group) coding video sources are analyzed with consideration of the traffic periodicity in frame level. The analysis is performed by introducing the two arrival models, that is, periodic on/off source model and periodic uniform arrival model. Modulated $N^*D$/D/1 queueing system is utilized in periodic on/off source model, while ${\Sigma}{N_i}^*D_i$/D/1 queueing system is used in periodic uniform arrival model. The presented models are validated by comparing with computer simulations. Numerical results for periodic uniform arrival model are shown to be very accurate, but those of periodic on/off source model are shown to be inaccurate as the number of sources are increased.

• Nuclear Engineering and Technology
• /
• 제51권8호
• /
• pp.1905-1915
• /
• 2019

This paper investigated the influence of simple support girds on flow, irrespective of having mixing vanes, in a 1 × 3 array rod bundle by using CFD methodology and the most accurate turbulence model which could reflect the actual physics of the flow was determined. In this context, a CFD model was created simulating the experimental studies on a single-phase flow [1] and the results were compared with the experimental data. In the first part of the study, influence of mesh was examined. Tetra, hybrid and poly type meshes were analyzed and convergence study was carried out on each in order to determine the most appropriate type and density. k - ε Standard and RSM LPS turbulence models were used in this section. In the second part of the study, the most appropriate turbulence model that could reflect the physics of the actual flow was investigated. RANS based turbulence models were examined using the mesh that was determined in the first part. Velocity and turbulence intensity results obtained on the upstream and downstream of the spacer grid at -3d_h, +3d_h and +40d_h locations were compared with the experimental data. In the last section of the study, the behavior of flow through the spacer grid was examined and its prominent aspects were highlighted on the most appropriate turbulence model determined in the second part. Results of the study revealed the importance of mesh type. Hybrid mesh having the largest number of structured elements performed remarkably better than the other two on results. While comparisons of numerical and experimental results showed an overall agreement within all turbulence models, RSM LPS presented better results than the others. Lastly, physical appearance of the flow through spacer grids revealed that springs has more influence on flow than dimples and induces transient flow behaviors. As a result, flow through a simple support grid was examined and the most appropriate turbulence model reflecting the actual physics of the flow was determined.

• Advanced Composite Materials
• /
• 제18권1호
• /
• pp.1-20
• /
• 2009

This paper describes the results of experiments and numerical simulation studies on the impact and indentation damage created by low-velocity impact subjected onto honeycomb sandwich panels for application to the BIMODAL tram. The test panels were subjected to low-velocity impact loading using an instrumented testing machine at six energy levels. Contact force histories as a function of time were evaluated and compared. The extent of the damage and depth of the permanent indentation was measured quantitatively using a 3-dimensional scanner. An explicit finite element analysis based on LS-DYNA3D was focused on the introduction of a material damage model and numerical simulation of low-velocity impact responses on honeycomb sandwich panels. Extensive material testing was conducted to determine the input parameters for the metallic and composite face-sheet materials and the effective equivalent damage model for the orthotropic honeycomb core material. Good agreement was obtained between numerical and experimental results; in particular, the numerical simulation was able to predict impact damage area and the depth of indentation of honeycomb sandwich composite panels created by the impact loading.