• 한국산학기술학회논문지
• /
• 제15권12호
• /
• pp.7309-7316
• /
• 2014

본 논문에서는 마이크로스트립 전송선로를 이용하여 소출력 이동통신 기지국용 삼중대역 멀티플렉서를 설계하고 제작하였다. 이 멀티플렉서는 셀룰러, WCDMA, 그리고 LTE를 포함하는 3개의 이동통신 주파수대역에서 이용 가능하도록 설계하였으며, 통과대역에서는 0.8 dB 삽입손실과 1.5 이하의 정재파비 그리고 차단대역에서는 15dB 이상의 대역저지 특성을 가지도록 설계하였다. 제작된 삼중대역 멀티플렉서 시료로부터 얻어진 신뢰성 테스트의 결과, 모든 시료의 제반 특성이 통과 대역 824~894 MHz, 1920~2170 MHz, 2500~2690 MHz에서 최대 삽입손실 0.71dB, 정재파비 1.38, 저지대역 감쇄 15 dB 이상을 보임으로써 우수한 성능과 설계 규격에서 정한 규정을 매우 잘 충족하고 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.682-685
• /
• 2002

In this paper, we defined necessary operations and functional blocks of a multiplexer for 3-D video systems and present our multiplexer design. We adopted the ITU-T's recommendation(H.222.0) to define the operations and functions of the multiplexer and explained the data structures and details of the design for multiview image processing. The data structure of TS(Transport Stream) and PES (Packetized Elementary Stream) in ITU-T Recommendation H.222.0 does not fit our multiview image processing system, because this recommendation is fur wide scope of transmission of non-telephone signals. Therefore, we modified these TS and PES stream structures. The TS is modified to DSS(3D System Stream) and PES is modified to SPDU(DSS Program Data Unit). We constructed the multiplexer through these modified DSS and SPDU. The number of multiview image channels is nine, and the image class employed is MPEG-2 SD(Standard Definition) level which requires a bandwidth of 2∼6 Mbps. The required clock speed should be faster than 54(= 6 ${\times}$ 9)㎒ which is the outer interface clock speed. The inside part of the multiplexer requires a clock speed of only 1/8 of 54㎒, since the inside part of the multiplexer operates by the unit of byte. we used ALTERA Quartus II and the FPGA verification for the simulation.

• 전자공학회논문지D
• /
• 제34D권11호
• /
• pp.70-75
• /
• 1997

a wavelength division multiplexer based on a polymeric arrayed-waveguide grating has been designed and fabricated. A 4-channel multiplexer with a spacing of 3.2 nm is designe dby using te 2-dimensional beam propagation method. A UV-curable epoxy, NOA73, is used for the core layer, and a passive polymer, PMMA, for the cladding layer. The polymer waveguides are fabricated by the reactive ion etching method and their optical properties are characterized. The fabricted device has a center wavelength of 1548.3 nm, and the wavelength spacing between the channels is 3.2nm. The measured crosstalk is better than -18dB.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1033-1036
• /
• 2008

In this paper, we describe the development of the polarized-light stereoscopic monitoring system based on full HDTV. The system consists of the stereoscopic camera part, image processing device for the stereoscopic image recording and stereoscopic display. The developed stereoscopic imaging display system reduces eyestrain and viewer fatigue.

• 정보통신설비학회논문지
• /
• 제3권2호
• /
• pp.51-60
• /
• 2004

A광섬유 용융인장방법에 의해서 100GHz 채널간격을 갖는 DWDM용 8채널 광다중화기를 제작하였다. 8채널 광다중화기는 전광섬유형 Mach Zehnder 간섭계(MZI)를 3단으로 다단 연결하여 제작되었으며, 광다중화기 채널별 출력파장의 삽입손실을 균일하게 하기 위하여 파장에 대한 삽입손실변화가 적은 파장무의존형 커플러(WFC)를 이용하여 전광섬유형 MZI를 제작하였다. 광다중화기를 구성하는 광섬유형 MZI를 제작함에 있어서 경로차에 따른 출력 파장간격의 변화를 시뮬레이션을 통하여 알아보았고 다단연결에 의한 광다중화기 구현방법을 논의하였다. 전용 제작 장치를 이용하여, 전광섬유형 MZI를 제작하였으며, 미세한 파장을 저절하기 위해서, $CO_2$ 레이저를 이용하였다. 제작된 8채널 광다중화기는 평균 삽입 손실 2.1dB, 5.5dB에서의 통과대역폭이 0.8nm 이며, 25dB의 채널 Crosstalk를 갖는 특성을 얻을 수 있었고, 편광의존손실은 0.06dB 였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1858-1860
• /
• 1999

To fabricate superconducting multiplexers with narrow pass band characteristics and reduce the physical size of device, we have designed multiplexer using hair-pin type filters with the center frequency of 13.6 GHz. Multiplexers have been fabricated superconductor(HTS), because It has low surface resistance. The $YBa_2Cu_3O_{7-{\delta}}$(YBCO) films were deposited on MgO substrates$(20{\times}20{\times}0.5mm^3)$ by using pulsed laser deposition and conventional photo-lithographic methods were used to pattern the multiplexer. Epitaxial YBCO films were grown on(100) MgO substrates and showed strongly c_axis orientations observed by X-ray diffraction technique. Superconducting transition temperatures were measured to be about 89K. Simulated results of superconducting multiplexer consisting of hair-pin type filters show the insertion loss of about 1.2dB. The measured frequency response will be compared with the simulated results.

• ETRI Journal
• /
• 제32권6호
• /
• pp.961-964
• /
• 2010

This letter introduces a stereoscopic video broadcasting system that provides 3D visual service and has full backward compatibility with legacy digital television (DTV) service in the same channel capacity. The proposed stereoscopic video broadcasting system in this letter is composed of both a hybrid codec and a multiplexer with a newly defined stereoscopic-related signaling method. In conclusion, the proposed method can be effectively applied for 3D broadcasting services without major changes in legacy broadcasting platforms.

• 대한산업공학회지
• /
• 제22권3호
• /
• pp.387-398
• /
• 1996

In this study the cell arrival processes from pre-buffer into multiplexer for MPEG(Motion Picture Experts Group) coding video sources are analyzed with consideration of the traffic periodicity in frame level. The analysis is performed by introducing the two arrival models, that is, periodic on/off source model and periodic uniform arrival model. Modulated $N^*D$/D/1 queueing system is utilized in periodic on/off source model, while ${\Sigma}{N_i}^*D_i$/D/1 queueing system is used in periodic uniform arrival model. The presented models are validated by comparing with computer simulations. Numerical results for periodic uniform arrival model are shown to be very accurate, but those of periodic on/off source model are shown to be inaccurate as the number of sources are increased.

• ETRI Journal
• /
• 제10권1호
• /
• pp.3-13
• /
• 1988

With the contunuing trends towards an information based society, telecommunications services are becoming an integral part of social activities. So, emphasis on ISDN is growing rapidly and placed on supporting integrated services delivery of different levels to the end user. The end user’s perception of an integraged services delivery(in particular, ISDN services) should reflect three interrelated capabilities, ISDN access capabilities and ISDN network capabilities. For turning the ISDN concept of above capabilities into reality, we have implemented the experimental system on user-network interfaces, which are three kinds of implementations in user access arrangements, namely basic access, intermediate rate multiplexed access and primary rate multiplexed access. Through these implementations, NTE(Network Terminating Equipment) is used for single basic access [2B+D], IMUX (Intermediate rate Multiplexer) for 4 basic accesses [4X(2B+D)] and PMUX(Primary rate Multiplexer) for [10/12 X (2B+D)]. This paper describes the outlines of system features on user access equipments, system architectures of testbed and experiment result of each access arrangements.

• Journal of electromagnetic engineering and science
• /
• 제16권2호
• /
• pp.100-105
• /
• 2016

We have designed a three-channel output multiplexer (OMUX) using a band-pass filter and an ultra-wideband (UWB) antenna. The proposed band-pass filter is composed of an inner rectangular loop, an outer open stub, and a defected ground structure. The outer open stub can be used to control the pass band, and the inner rectangular loop can improve the insertion loss characteristics of the band-pass filter. The proposed band-pass filter, UWB antenna, and OMUX are fabricated and measured. The designed OMUX can cover the band group 1 (3,168-4,752 MHz) of WiX system. The measured radiation patterns are close to those of a conventional dipole antenna and the measured antenna gain varies from 1.8 dBi to 3 dBi over the operating frequency range.