• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7309-7316
• /
• 2014

In this paper, a triple-band multiplexer using a microstrip transmission line was designed and fabricated to make use of a low power portable base station. This multiplexer was used in the triple-band including the cellular, WCDMA and LTE mobile frequency band, and designed to have an insertion loss of 0.8 dB, low SWR of 1.5 in the passband and a band rejection of 15 dB in the stopband. From the measured results obtained by a confidence test for the fabricated multiplexer samples, the maximum insertion loss and SWR of the fabricated multiplexer samples in all passbands of 824-894MHz, 1920-2170 MHz and 2500-2600 MHz were below 0.71 dB and 1.38, and the attenuations in the stopbands were better than 15 dB. Therefore, the triple-band multiplexer has good performance and satisfies the design specifications.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.682-685
• /
• 2002

In this paper, we defined necessary operations and functional blocks of a multiplexer for 3-D video systems and present our multiplexer design. We adopted the ITU-T's recommendation(H.222.0) to define the operations and functions of the multiplexer and explained the data structures and details of the design for multiview image processing. The data structure of TS(Transport Stream) and PES (Packetized Elementary Stream) in ITU-T Recommendation H.222.0 does not fit our multiview image processing system, because this recommendation is fur wide scope of transmission of non-telephone signals. Therefore, we modified these TS and PES stream structures. The TS is modified to DSS(3D System Stream) and PES is modified to SPDU(DSS Program Data Unit). We constructed the multiplexer through these modified DSS and SPDU. The number of multiview image channels is nine, and the image class employed is MPEG-2 SD(Standard Definition) level which requires a bandwidth of 2∼6 Mbps. The required clock speed should be faster than 54(= 6 ${\times}$ 9)㎒ which is the outer interface clock speed. The inside part of the multiplexer requires a clock speed of only 1/8 of 54㎒, since the inside part of the multiplexer operates by the unit of byte. we used ALTERA Quartus II and the FPGA verification for the simulation.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.11
• /
• pp.70-75
• /
• 1997

a wavelength division multiplexer based on a polymeric arrayed-waveguide grating has been designed and fabricated. A 4-channel multiplexer with a spacing of 3.2 nm is designe dby using te 2-dimensional beam propagation method. A UV-curable epoxy, NOA73, is used for the core layer, and a passive polymer, PMMA, for the cladding layer. The polymer waveguides are fabricated by the reactive ion etching method and their optical properties are characterized. The fabricted device has a center wavelength of 1548.3 nm, and the wavelength spacing between the channels is 3.2nm. The measured crosstalk is better than -18dB.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1033-1036
• /
• 2008

In this paper, we describe the development of the polarized-light stereoscopic monitoring system based on full HDTV. The system consists of the stereoscopic camera part, image processing device for the stereoscopic image recording and stereoscopic display. The developed stereoscopic imaging display system reduces eyestrain and viewer fatigue.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.3 no.2
• /
• pp.51-60
• /
• 2004

In this paper, 8-channel multiplexer with 100GHz channel spacing is fabricated. The 8-channel multiplexer is fabricated by connecting three cascaded Mach Zehnder Interferometer (MZI) of optical fiber type, and each interferometer has the wavelength interval of 100GHz, 200GHz and 400GHz, respectively. furthermore, to acquire uniform insertion loss, it is fabricated by using Wavelength Flatten Coupler (WFC) in which the variation of insertion loss is low. Especially, the variation of wavelength interval in the output is explicitly simulated as a function of optical path difference, and the wavelength coupling process along with cascaded connection is discussed. $CO_2$ laser to adjust precisely the wavelength. In summary, The prototype composed by eight cascaded MZI has an insertion loss of 2.1dB, the bandwidth of 0.8nm at 5.5dB point, and channel crosstalk of 25dB Furthermore, the loss dependent on polarization is measured as 0.06dB.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1858-1860
• /
• 1999

To fabricate superconducting multiplexers with narrow pass band characteristics and reduce the physical size of device, we have designed multiplexer using hair-pin type filters with the center frequency of 13.6 GHz. Multiplexers have been fabricated superconductor(HTS), because It has low surface resistance. The $YBa_2Cu_3O_{7-{\delta}}$(YBCO) films were deposited on MgO substrates$(20{\times}20{\times}0.5mm^3)$ by using pulsed laser deposition and conventional photo-lithographic methods were used to pattern the multiplexer. Epitaxial YBCO films were grown on(100) MgO substrates and showed strongly c_axis orientations observed by X-ray diffraction technique. Superconducting transition temperatures were measured to be about 89K. Simulated results of superconducting multiplexer consisting of hair-pin type filters show the insertion loss of about 1.2dB. The measured frequency response will be compared with the simulated results.

• ETRI Journal
• /
• v.32 no.6
• /
• pp.961-964
• /
• 2010

This letter introduces a stereoscopic video broadcasting system that provides 3D visual service and has full backward compatibility with legacy digital television (DTV) service in the same channel capacity. The proposed stereoscopic video broadcasting system in this letter is composed of both a hybrid codec and a multiplexer with a newly defined stereoscopic-related signaling method. In conclusion, the proposed method can be effectively applied for 3D broadcasting services without major changes in legacy broadcasting platforms.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.3
• /
• pp.387-398
• /
• 1996

In this study the cell arrival processes from pre-buffer into multiplexer for MPEG(Motion Picture Experts Group) coding video sources are analyzed with consideration of the traffic periodicity in frame level. The analysis is performed by introducing the two arrival models, that is, periodic on/off source model and periodic uniform arrival model. Modulated $N^*D$/D/1 queueing system is utilized in periodic on/off source model, while ${\Sigma}{N_i}^*D_i$/D/1 queueing system is used in periodic uniform arrival model. The presented models are validated by comparing with computer simulations. Numerical results for periodic uniform arrival model are shown to be very accurate, but those of periodic on/off source model are shown to be inaccurate as the number of sources are increased.

• ETRI Journal
• /
• v.10 no.1
• /
• pp.3-13
• /
• 1988

With the contunuing trends towards an information based society, telecommunications services are becoming an integral part of social activities. So, emphasis on ISDN is growing rapidly and placed on supporting integrated services delivery of different levels to the end user. The end user’s perception of an integraged services delivery(in particular, ISDN services) should reflect three interrelated capabilities, ISDN access capabilities and ISDN network capabilities. For turning the ISDN concept of above capabilities into reality, we have implemented the experimental system on user-network interfaces, which are three kinds of implementations in user access arrangements, namely basic access, intermediate rate multiplexed access and primary rate multiplexed access. Through these implementations, NTE(Network Terminating Equipment) is used for single basic access [2B+D], IMUX (Intermediate rate Multiplexer) for 4 basic accesses [4X(2B+D)] and PMUX(Primary rate Multiplexer) for [10/12 X (2B+D)]. This paper describes the outlines of system features on user access equipments, system architectures of testbed and experiment result of each access arrangements.

• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.100-105
• /
• 2016

We have designed a three-channel output multiplexer (OMUX) using a band-pass filter and an ultra-wideband (UWB) antenna. The proposed band-pass filter is composed of an inner rectangular loop, an outer open stub, and a defected ground structure. The outer open stub can be used to control the pass band, and the inner rectangular loop can improve the insertion loss characteristics of the band-pass filter. The proposed band-pass filter, UWB antenna, and OMUX are fabricated and measured. The designed OMUX can cover the band group 1 (3,168-4,752 MHz) of WiX system. The measured radiation patterns are close to those of a conventional dipole antenna and the measured antenna gain varies from 1.8 dBi to 3 dBi over the operating frequency range.