• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.3
• /
• pp.187-198
• /
• 1970

The author succeeded in rearing the young blue crab from the first stage of zoe ato the true crab shape, and during this time he observed their growth and metamorphosis. The relationships between the number of eggs carried by female crabs (E) and the carapace width (C) and body weight (W) are shown as follows: E= 27.9049C-281.8155, E=0.5682 W-116.4606. There are five zoeal stages and a megalopa in the complete larval development of the blue crab. Water temperature in rearing aquaria ranged from 21.4 to $25.2^{\circ}C$. The duration of each zoeal stage was two days on the average. After the fifth moulting, the zoea becomes megalopa and 5 to 6 days later the megalopa moults and develops into the first stage of adult crab shape. The carapace width of megalopa measured about 1.70 mm and the carapace length, from the tip of the rostrum to the posterior dorsal margin of the carapace, was about 2.78 mm on the average. The carapace width and length of the first crab, 18 days after hatching, measured about 4.48 mm and 2.62 mm respectively. After two days, the first crab moulted and grew into the second crab with about 6.47 mm in carapace width and 4.66 mm in carapace length. The larval rearing in the outdoor tank shelved better results than in the indoor aquarium. The highest mortality occurred when the first stage of zoea moulted into the second stage. Percentage of crabs which survived, from the first crab to the ninth crab stages, was about $55\%$. The relationships between rearing days (D) and the carapace width (C), carapace length (L) and body weight (W) of the crab stages during 40 days of rearing are shown as follows. Carapace width, Indoor: C=1.1250D+1.7227 Outdoor C=1.3465D -0.2449 Carapace length, Indoor: L=0.6654D+1.6712 Outdoor: L=0.7893D+0.6919 Body Weight, Outdoor: $$W=1.15e^{0.12423D}$$ Indoor: $$W=6.759\times10^{-2}D^{1.2598}$$ (9-19 day old crabs) Outdoor: $$W=4.136\times10^{-2}D^{1.6024}$$ (21-40 day old crabs) During the crab stage, the following relationships between the number of moulting times and the carapace width (C), carapace length (L) and body weight (W) were found as follows: $$C=5.2e^{0.28119N}$$ $$L=3.65e^{0.26372N}$$ $$W= 0.14e^{0.7037N}$$ The relationships between the carapace length (L) and the carapace width (C) and body weight (W) of the crab stages are shown as follows: Carapace length, mm Formula 2.62-27.17 L=1.6864C-1.0387 7.47-18.53 $$W=9.367\times10^{-5}C^{3.5567}$$ 22.11-27.17 $$W=3.406\times10^{-5}C{3.8571}$$

• The Research Journal of the Costume Culture
• /
• v.19 no.6
• /
• pp.1205-1220
• /
• 2011

The purpose of this study is to verify the change of body posture by putting on the late $19^{th}$ century English women's bodice or waistcoat. This study analyzed the female somatotype which puts on upper garments of Victorian era with using 3D body scan technology. Two sets of $19^{th}$ century women's bodice and waistcoat patterns were developed with the $19^{th}$ century model size and those patterns were used for making the experimental garments. The fit of experimental garments was evaluated by the degree of change with posture and waist measurements. Three women with the same waist girth measurements with the model size were participated to the fitting test. The postural change was measured from cross-sectional body diagrams. The result of this study showed that the waist measurement of the late $19^{th}$ century English women's bodice and waistcoat pattern was smaller than the waist girth measurement. These garments compressed the midriff of the body and it made women's distinct body silhouette. The waist girth measurement of 1876 bodice pattern was 9.2cm smaller than presented model size. The subjects' waist girth measurements were shortened by 5.0~6.1cm after wearing the 1876 bodice garment. The waist girth measurement of 1880 waistcoat pattern was 7.1cm smaller than presented model size. The subjects' waist girth measurements were shortened by 2.7~3.7cm after wearing the 1880 waistcoat garment. The back side parts of their waist were compressed and their postures were changed. The neck and shoulders were moved forward after wearing the experimental garments. These results showed that body posture could be changed to "S" shape silhouette as wearing the late $19^{th}$ century English women's bodice or waistcoat.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.347-353
• /
• 2023

Currently, soldiers enlisted in the military (Army) are receiving measurements (automatic, manual) of body parts and trying on sample clothing at boot training centers, and then receiving clothing in the desired size. Due to the low accuracy of the measured size during the measurement process, in the military, which uses a relatively more detailed sizing system than civilian casual clothes, the supplied clothes do not fit properly, so the frequency of changing the clothes is very frequent. In addition, there is a problem in that inventory is managed inefficiently by applying the measurement system based on the old generation body shape data collected more than a decade ago without reflecting the western-changed body type change of the MZ generation. That is, military uniforms of the necessary size are insufficient, and many unnecessary-sized military uniforms are in stock. Therefore, in order to reduce the frequency of clothing replacement and improve the efficiency of stock management, deep learning-based automatic measurement of body size, big data analysis, and machine learning-based "Personalized Combat Uniform Automatic Recommendation System for Enlisted Soldiers" is proposed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.487-494
• /
• 2012

Acoustical backscattering characteristics of Japanese anchovy can be estimated by Kirchhoffray mode model (KRM model) due to estimate exact body and swim-bladder shape of the fish, the samples were rapidly frozen by dry-ice and alcohol. X-ray photos for ventral and lateral direction for 6 samples were taken and the 3D coordinates of the body swim-bladder were estimated by digitizing from the photos. The angles between the axis of body and swim-bladder were about $9^{\circ}$ at 38kHz and $7^{\circ}$ at 120kHz, 200kHz. General formula of TS and BL estimated were < $TS_{38kHz}$ >=20logBL-67.3, < $TS_{120kHz}$ >=20logBL-66.6, < $TS_{200kHz}$ >=20logBL-67.0. As a result, we confirmed KRM model is very useful to estimate TS (Target Strength) for design of experiment and it also can be applied to estimate the abundance of Japanese anchovy distributed by 2 frequency difference method in the survey area.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.481-491
• /
• 1995

Endovaginal and endorectal receiver only surface coils were designed for MR imaging (MRI) and $^1H$ MR spectroscopy (MRS) for the uterine cervix and the prostate. The shape of endovaginal coil wire was rectangular with round corner. Size of the coil wire was empirically determined for 7cm and 4cm along the long and short axis, respectively. The coil wire loop was supported by acryl handle and bent about $150^{\circ}$ at one side of the loop considering the average angle of the cervix to the vagina. We called this as a "spoon-type endovaginal coil". The wire of the endorectal coil was made of the flexible materials so that the wire loop became long elliptic shape by pushing the acryl handle into the plastic tube for the comfort of patients when the coil was inserted into the cervix. Then, the shape was maintained to be circle by popping out handle. Conventional spin echo (SE) and fast spin echo (FSE) sequences were used as 71 and 72 weighted imaging sequences, respectively. Matrix size was 128~$256{\times}256$. FOVs for surface coil and body coil were 14cm and 24cm, respectively. 3D volume localized in vivo $^1H$ MR spectroscopy of the human cervix and prostate was performed using PRESS or STEAM localization method with the following parameters . TR=3 sec, TE=135 msec for PRESS or 30 msec for STEAM, NEX=2, NS=48, Sl=2048, and SW=2500 Hz. Using home-built endovaginal and endorectal coils, excellent T1- and T2-images were obtained to visualize early cervical and prostate tumors. 3D volume localized in vivo IH MRS was useful to differentiate the cancerous tissue from the normal tissue.

• Conservation Science in Museum
• /
• v.27
• /
• pp.1-22
• /
• 2022

A chimi(a roof ridge decoration) excavated from the Busosan Temple Site in Buyeo was restored in 1978 at the Buyeo Museum. The gypsum restoration material had deteriorated over time and part of it was seriously damaged and unable to bear the weight of the chimi. The chimi features traces of emergency treatment revealing that the inside of the body and some portions of the tail were reinforced several times using epoxy resin. A condition survey performed in preparation for its transfer for an exhibition found the lower body and wings of the chimi to be highly vulnerable and it was determined that the chimi needed further restoration. The dismantling of the chimi for restoration revealed several elements that provide clues to the production techniques applied by its makers, so they were subjected to inspection. This study explores the production techniques used in the chimi from the Busosan Temple Site that were revealed during the process of dismantling it for restoration. The chimi was inspected using 3D scanning and its rigid vertical shape was restored to a natural form based on the production techniques identified during the dismantling process. The existing restoration material was replaced to improve durability. 3D printed elements were produced based on 3D modelling and were joined to the original chimi to correct its shape and fill in the missing parts, restoring the chimi to its original appearance.

• Journal of the Korea Convergence Society
• /
• v.1 no.1
• /
• pp.69-75
• /
• 2010

The importance of a using the visual media in English education has been increased. By an importance of Characters in English language content, the more effort is needed for a learner to show the English pronunciation and a realistic implementation. In this paper, we tried to review the Syntax-based Educational Contents Authoring System. For the more realistic lip-sync character, 3D character to enhance the efficiency of the education was constructed. We used a chart of the association structure analysis of mouth's shape. we produced an optimized 3D character through a process of a concept, a modeling, a mapping and an animating design. For more effective educational content for 3D character creation, the next research will be continuously a 3d Character added to a hand motion and body motion in order to show an effective communication example.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.117-124
• /
• 2009

To inspect the quality of data collected from a large-scale body measurement and investigation project, it is necessary to establish a proper data editing process. The three-dimensional body measurement may have measuring errors caused from measurer's proficiency or changes in the subject's posture. And it may also have errors caused in the process of algorithm expressing the information obtained from the three-dimensional scanner into numerical values, and in the course of data-processing dealing with numerous data for individuals. When those errors are found, the quality of the measured data is deteriorated, and they consequently reduce the quality of statistics which was conducted on the basis of it. Therefore this study intends to suggest a new way to improve the quality of the data collected from the three-dimensional body measurement by proposing a working procedure identifying data errors and correcting them from the whole data processing procedure-collecting, processing, and analyzing- of the 2004 Size Korea Three-dimensional Body Measurement Project. This study was carried out into three stages: Firstly, we detected erroneous data by examining of logical relations among variables under each edit rule. Secondly, we detected suspicious data through independent examination of individual variable value by sex and age. Finally, we examined scatter-plot matrix of many variables to consider the relationships among them. This simple graphical tool helps us to find out whether some suspicious data exist in the data set or not. As a result of this study, we detected some erroneous data included in the raw data. We figured out that the main errors are not because of the system errors that the three-dimensional body measurement system has but because of the subject's original three-dimensional shape data. Therefore by correcting some erroneous data, we have enhanced data quality.

• Wind and Structures
• /
• v.3 no.3
• /
• pp.209-220
• /
• 2000

The Strouhal number is an important nondimensional number which is explanatory of aerodynamic instability phenomena. It takes on the different characteristic constant value depending upon the cross-sectional shape of the body being enveloped by the flow. A number of investigations into this subject, especially on the drag test, surface pressure test and hot-wire test, have been carried out under the fixed state of the body in the past. However, almost no investigations concerning the determination of the St on wind-induced vibration of the body have been reported in the past even though the aerodynamic behavior of the body is very important because the construction of wind-sensitive structures is recently on the sharp increase. Based on a series of wind tunnel tests, this paper addresses a new method to determine the Strouhal number of rectangular cylinder in the uniform flow. The central idea of the proposed method is that the Strouhal number can be obtained directly by the aerodynamic behaviors of the body through wind-induced vibration test. The validity of proposed method is evaluated by comparing with the results obtained by previous studies in three B/Ds at attack angle $0^{\circ}$ and a square cylinder with various attack angles. The values and trends of the proposed Strouhal numbers are in good agreements with values of previous studies. And also, the Strouhal numbers of B/D=1.5 and 2.0 with various attack angles are obtained by the proposed method and verified by other method. This proposed method is as good as any other previous methods to obtain the Strouhal number.

• Journal of radiological science and technology
• /
• v.37 no.3
• /
• pp.203-209
• /
• 2014

Usefulness and clinical availability for surgery efficiency were evaluated by conducting pre-operative planning with a model manufactured by desktop 3D printer by using clavicle CT image. The patient-customized clavicle fracture model was manufactured by desktop 3D printer of FDM wire laminated processing method by converting the CT image into STL file in Open Source DICOM Viewer Osirix. Also, the model of the original shape before damaged was restored and manufactured by Mirror technique based on STL file of not fractured clavicle of the other side by using the symmetry feature of the human body. For the model, the position and size, degree of the fracture was equally printed out. Using the clavicle model directly manufactured with low cost and less time in Department of Radiology is considered to be useful because it can reduce secondary damage during surgery and increase surgery efficiency with Minimal invasive percutaneous plate osteosynthesis(MIPO).