• Journal of Biomedical Engineering Research
• /
• v.37 no.1
• /
• pp.39-45
• /
• 2016

A pressure measurement system was developed to verify magnitude and position of transferred pressure on the body surface during the intermittent pneumatic compression (IPC) which is one of the most well-known methods for the prevention of deep vein thrombosis (DVT). Eighty force sensing resistors (FSR) were arranged on a mannequin leg and a hardware controller sensed, digitized, and transferred pressure data every second while IPC was being applied. Finally, sensed pressure data were color coded and visualized on the 3D model with lab-developed software. The pressure data were also saved to files for further analysis. Using this measurement system, the changing pattern of pressure was measured on the mannequin leg by changing both chamber pressure and cuff tightness. As a result, net pressure transferred onto the body surface is dependent on chamber pressure and cuff tightness. Under the same chamber pressure, the tighter a cuff was worn, the wider compressed area was and the shorter compression cycle was. Also transferred pressure was proportional to both chamber pressure and cuff tightness.

• Korean Journal of Poultry Science
• /
• v.39 no.3
• /
• pp.245-252
• /
• 2012

This study was carried out to investigate the performance of laying period of two-crossbred of Korean native chickens for producing laying hens. A total of four hundred eighty female 2-crossbred chicks that restored strains and were aboriginal at National Institute of Animal Science. There were four crossbreds (4 replications/crossbred, 30 birds/replication) as A) C strain ${\times}$ Y strain, B) C strain ${\times}$ L strain, C) C strain ${\times}$ G strain, and D) C strain ${\times}$ W strain, respectively. There were no significant difference on age at first egg among crossbreds (P>0.05). Egg weight and body weight of B crossbred at first egg was higher than other crossbreds (P<0.05). Body weight of B crossbred was the highest 20 to 72 weeks (P<0.05), and C and D crossbreds were lower compared to A and B crossbreds (P<0.05). Average feed intake of B crossbred was the highest among crossbreds (P<0.05), and that of A crossbred was higher compared to C and D crossbreds (P<0.05). Weekly feed intake of four crossbreds decreased from 50 weeks. Weekly egg weight of B crossbred was the highest and that of D crossbred was the lowest among crossbreds (P<0.05). Feed conversion ratio of A and B crossbreds was lower than that of C and D crossbreds. Hen-house egg production of C crossbred was the highest among crossbreds until 26 weeks old (P<0.05), but there was no significant difference among crossbreds from at the age of 26 weeks (P>0.05). Hen-day egg production decreased after at the age of 38 weeks. Weekly egg production of A and B crossbreds was higher compared to C and D crossbreds at the age of 68~72 weeks (P<0.05). These results suggested the basic data on the record of laying period of 2-crossbreed Korean Native Chickens for producing laying hens.

• Journal of Technologic Dentistry
• /
• v.39 no.3
• /
• pp.137-143
• /
• 2017

Purpose: The purpose of this study is to analyze the fitness of heat - pressed ceramic laminate veneers fabricated using the additive manufacturing. Methods: Impression was replicated by using light body silicone and heavy body silicone on the custom tray, and it was fabricated using Type IV Stone. The test specimens were prepared by using a dental scanner, a laminating veneer using a dental design program, and a specimen with a 3D printer. The control specimens were prepared by the lost wax technique and heat - pressed to fabricate the specimens. The data of the specimens were measured by the RMS value of the internal fitness a using a 3-dimensional measurement program. Results: The Stereolithography laminate veneer group was measured at $78.10(4.09){\mu}m$ and the LWV group was measured at $31.50(5.10){\mu}m$. There is a significant difference between the two groups (p<0.001) Conclusion : Evaluation of fitness laminate veneers was fabricated by additive manufacturing showed the difference statistically significantly and clinically acceptable result.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.428-439
• /
• 2011

It is well known that the sound characteristics of Korean bell depend on the shape and the alloy constituents. Development of the methods to acquire exact shape data and alloy constituents of the whole body of the bell is very important for the study and systematic management of Korean bells. The practical scanning and modeling methods to get shape data from optical triangulation laser scanners are proposed. The 3D shape data by the proposed methods can be the basis of diverse measurements such as curvature, volume, thickness and the distance between any two points. A nondestructive alloy constituents measuring method which can overcome the limitations of partial data collection and damages to Korean bells is also suggested to get the whole alloy characteristics. Following the developed methods, the data of the shapes and alloy constituents of 18 Korean bells are collected and the errors of existing measurement data for the shape have been corrected.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.699-710
• /
• 2007

This study was conducted to estimate the genetic parameters and their relationships with weight traits of the steers and bulls in the Hanwoo population. The data used were weights and weight gain of performance and progeny test from 6,024 heads of Hanwoo. Data of performance test consisted of total 3,737 heads raised from August, 1989 to September, 2005. The number of the records of progeny test was total 2,287 heads from August, 1996 to June, 2004. The heritabilities and correlations for the body weights at the ages of 6 months, 12 months and 24 months and average daily gain were estimated by DFREML. Overall means and standard deviations of body weights at 6 and 12 months of age and average daily gain(ADG) from the data of performance test were 181.72±30.22kg, 351.48±40.24kg, 998.07±153.84g, respectively. Overall means and standard deviations of body weights at 6, 12, and 24 month of age and ADG from the data of progeny test were 169.18±32.82kg, 229.37±44.57kg, 570.45±64.36kg and 739.41± 172.14g, respectively. The heritability estimates of the body weight at 6, 12 month and ADG from the performance test were 0.54±0.06, 0.60±0.06 and 0.23±0.04, respectively. The heritability estimates of the body weight at 6, 12, 24 month and ADG from the progeny test were 0.80±0.08, 0.50±0.07, 0.46±0.07 and 0.07±0.03, respectively.

• Korean Journal of Organic Agriculture
• /
• v.8 no.3
• /
• pp.111-120
• /
• 2000

In this study, by-products of rice bran, rice hull, bean curd dregs and food waste were fermented with different ratios of 26, 26, 34 and 14% respectively and the experimental diets were prepared mixing it with various ratios of commercial diets (fermented feed commercial feed : A 80 : 20, B 70 : 30, C 60 : 40, D 50:50). In Experiment I, feed intake, nutrients digestibilities and nitrogen retention were investigated and body weight gain in Experiment 1. For chemical composition of experimental diets, crude protein contents were 13.73, 13.78, 14.45 and 15.14% in A, B, C and D respectively and the contents of crude fat and crude fiber were highest in A as 8.66 and 27.82% respectively. 2. Dry hurler intakes were significantly higher (P<0.05) in A(362.06g/d) and C(358.49g/d) than B and D. Intakes of crude protein and crude fat were not significantly different (P>0.05) among treatments however those of crude fiber and crude ash were significantly higher (P>0.05) in A(101.47g/d). 3. Dry matter digestibilities in the range of 53.38∼68.81% in all treatments have shown the highest value in C of 60% fermented feed plus 40% commercial diet but the lowest in A of 80% of fermented feed plus 20% commercial diet (P<0.05). 59.85% of digestibility of crude protein in A was also lowest among all treatments (p<0.05), 4. 8.47g/d of nitrogen intake in C was recorded highest (P<0.05) however the highest nitrogen retention was marked in B of 50% fermented feed plus 50% of commercial diet due mainly to lower excretion of nitrogen through feces. 5. The data of live weight gain in Experiment II has not been shown as a result since the proper daily gain of body weight was achieved only in D as 88.89g/d and the goats in other treatments have shown frequent diarrhea. However, neglecting the animals with diarrhea, higher amounts of concentrates in the diets (C and D) showed the tendency of higher weight gain. 6. In this study, feeding 60% fermented feed manufactured with domestic agricultural by-products of rice bran, rice hull, bean curd dregs and food waste to Korean native goats have shown satisfactory results of intake and digestibility and it indicates that utilization of domestic agricultural by-products in goats could be improved by the process of fermentation. However it's effects on body weight gain and nitrogen retention were below than expected. Different sources of feedstuff for fermentation may result in different performances of animals. However, to draw overall conclusion from this study, 50∼60% of fermented feed can be recommended in the case of mixing with concentrates.

• Journal of Life Science
• /
• v.25 no.6
• /
• pp.703-708
• /
• 2015

Hox genes encode a highly conserved family of homeodomain-containing transcription factors controlling vertebrate pattern formation along the anteroposterior body axis during embryogenesis. Retinoic acid (RA) is a key morphogen in embryogenesis and a critical regulator of both adult and embryonic cellular activity. Specifically, RA regulates Hox gene expression in mouse- or human-derived embryonic carcinoma (EC) cells. Histone modification has been reported to play a pivotal role in the process of RA-induced gene expression and cell differentiation. As histone modification is thought to play an essential role in RA-induced Hox gene expression, we examined RA-induced initiation of collinear expression of Hox genes and the corresponding histone modifications in F9 murine embryonic teratocarcinoma (EC) cells. Hox expression patterns and histone modifications were analyzed by semiquantitative RT-PCR, RNA-sequencing, and chromatin immuno-precipitation (ChIP)-PCR analyses. The Hoxc4 gene (D0) was initiated earlier than the Hoxc5 to –c10 genes (D3) upon RA treatment (day 0 [D0], day 1 [D1], and day 3 [D3]). The Hox nonexpressing D0 sample had a strong repressive marker, H3K27me3, than the D1 and D3 samples. In the D1 and D3 samples, reduced enrichment of the H3K27me3 marker was observed in the whole cluster. The active H3K4me3 marker was closely associated with the collinear expression of Hoxc genes. Thus, the Hoxc4 gene (D1) and all Hoxc genes (D3) expressed H3K4me3 upon transcription activation. In conclusion, these data indicated that removing H3K27me3 and acquiring H3K4me3 regulated RA-induced Hoxc gene collinearity in F9 cells.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.95-107
• /
• 2022

This study attempted to develop a bodice prototype suitable for the 20's obese male's trunk with a BMI of 25kg/m² or more, which is distinguished from the standard body type. Through this, it was intended to provide data to help the development of clothing for obese males. Patterns such as front bodice shoulder line and front sagging were modified through primary appearance and garment pressure evaluation. Through the second evaluation, corrections such as back armhole, back waistline, and front sagging were performed. Through the third evaluation, the final pattern drafting method was developed by removing the front sagging added through the second evaluation. In the case of obese male body types in their 20s, a drafting method distinguished from the standard body type was required in the method of setting the front and back waist lines, back armhole darts, and front shoulder lines due to protruding and posture of the abdomen. This study was meaningful in that it presented a bodice prototype drafting method suitable for the 20s obese males. In the follow-up study, it is thought that actual clothing experiments and studies to develop clothing patterns by applying them to obese male tops in their 20s should be conducted.

• Journal of Korean Clinical Nursing Research
• /
• v.23 no.3
• /
• pp.341-349
• /
• 2017

Purpose: Focusing manner is very powerful mind-body self-help and self-awareness competence. So focusing manner may affect nurses' emotional labor and nursing performance, but few are known about it to date. The purpose of this study was to identify the degree of focusing manner, emotional labor, nursing performance of clinical nurses, and the factors that affect nursing performance. Methods: In order to collect data, structured questionnaires were administered to 212 nurses who worked at 2 university hospitals located in D city. Data were analyzed by t-test, ANOVA, correlation and multiple regression using SPSS/WIN 20.0. Results: Nursing performance had positive relationship with focusing manner (r=.45, p<.001), and negative relationship with emotional labor (r=-.25, p<.001). And the most prediction factor influencing nursing performance was focusing manner (${\beta}=.41$, p<.001) and the other factors were age (${\beta}=.30$, p=.002), and emotional labor (${\beta}=.14$, p=.012). The total variance was 37.1% by those predictors (F=25.87, p<.001). Conclusion: Based on the results of this study, it is necessary to develop and educational program on focusing manner-oriented psychotherapy in order to improve the nursing performance. Also, the management system for controlling emotional labor needs to be set up for nurses in clinical settings.

• Korean Journal of Environment and Ecology
• /
• v.28 no.4
• /
• pp.404-410
• /
• 2014

In this study, we conducted an analysis of the drumming bioacoustics of three woodpeckers typical to South Korea. The targeted species were, from largest to smallest in size, the Black Woodpecker(Dryocopus martius), the Great Spotted Woodpecker(Dendrocopos major) and the Japanese Pygmy Woodpecker(Dendrocopos Kizuki). The drumming sounds of these three species of woodpeckers were recorded and analyzed. Sound recordings were taken in the Guryongsa Valley, Chiaksan National Park and on the campus of Sangji University, Wonju City, South Korea. Drumming recordings were obtained in the following manner. As researchers walked along trails in the investigation areas, when woodpecker drumming sounds were indicated, positive identification of the species was made using binoculars then the recording of the drumming sound was started. The average time per drumming, in seconds, was Black Woodpecker(D. martius) 1.614 seconds, Great Spotted Woodpecker(D. major) 0.683 seconds and Japanese Pygmy woodpecker(D. Kizuki) 0.200 seconds. The average number of strikes for each drumming was Black Woodpecker(D. martius) 31.2 times, Great Spotted Woodpecker(D. major) 14.9 times and Japanese Pygmy Woodpecker(D. Kizuki) 6.7 times. The strike speed, in strikes/sec, for each species was the Black Woodpecker(D. martius)19.3strikes/sec, the Great Spotted Woodpecker(D. major) 21.8strikes/sec and Japanese Pygmy Woodpecker(D. Kizuki)33.3strikes/sec. The frequency of drumming, in Hertz, was Black Woodpecker(D. martius) 776.9Hz, Great Spotted Woodpecker (D. major) 1,213.8Hz and Japanese Pygmy Woodpecker(D. Kizuki) 826.0Hz. In interpreting this data, Analysis of Variance (ANOVA) was used and it was determined that there was a significant statistical difference between species in drumming duration, time and interval of striking. The findings support that the bigger the biomass of the woodpecker, the longer the drumming duration and striking time. However, the smaller the size of the woodpecker, the faster the strike speed. A correlation between body type size and drumming characteristics was clearly identified. As for strike frequency, measured in Hertz, the medium sized Great Spotted Woodpecker's (D. major) frequency was high whereas the Black Woodpecker(D. martius) and Japanese Pygmy Woodpecker's(D. Kizuki) frequency was similar. A clear trend in reference to body size on this measure does not exist.