References
- Aboushelib MN, Elmahy WA, Ghazy MH. Internal Adaptation, Marginal Accuracy and Microleakage of a Pressable Versus a Machinable Ceramic Laminate Veneers. J Dent, 40(8), 670-677, 2012. https://doi.org/10.1016/j.jdent.2012.04.019
- Alajaji NK, Bardwell D, Finkelman M, Ali A. Micro-Ct Evaluation of Ceramic Inlays: Comparison of the Marginal and Internal Fit of Five and Three Axis Cam Systems with a Heat Press Technique. J Esthet Restor Dent, 2016.
- Bae SY, Park JY, Jeong ID, Kim HY, Kim JH, Kim WC. Three-Dimensional Analysis of Marginal and Internal Fit of Copings Fabricated with Polyetherketoneketone (Pekk) and Zirconia. J Prosthodont Res, 61(2), 106-112, 2017. https://doi.org/10.1016/j.jpor.2016.07.005
- Berger U. Aspects of accuracy and precision in the additive manufacturing of plastic gears. Virtual Phys Prototype, 10(2), 49-57, 2015. https://doi.org/10.1080/17452759.2015.1026127
- De Beer N. Advances in Three Dimensional Printing-State of the Art and Future Perspectives. J for New Generation Sciences, 4(1), 21-49, 2006.
- Dehurtevent M, Robberecht L, Behin P. Influence of Dentist Experience with Scan Spray Systems Used in Direct Cad/Cam Impressions. J Prosthet Dent, 113(1), 17-21, 2015. https://doi.org/10.1016/j.prosdent.2014.07.006
- Ghaffari T, Hamedi-Rad F, Fakhrzadeh V. Marginal Adaptation of Spinell Inceram and Feldspathic Porcelain Laminate Veneers. Dent Res J, 13(3), 239, 2016 https://doi.org/10.4103/1735-3327.182183
- Han MS. An evaluation of quality of dental prostheses printed by dental 3-dimensional printing system. J Korean Acad Dent Tech, 38(3), 188-191, 2016.
- Kim CM, Jeon JH, Lee JJ, Kim JH, Kim WC. Precision Evaluation of Crown Prosthesis Manufactured by Two Bur and Three Bur. J Korean Acad Dent Tech, 38(2), 57-62, 2016. https://doi.org/10.14347/kadt.2016.38.2.57
- Kim KB, Kim JH, Kim WC, Kim HY, Kim JH. Marginal fit evaluation of 3 unit fixed dental prostheses fabricated by rapid prototyping method. J Korean Acad Dent Tech, 34(2) 105-11. 2012. https://doi.org/10.14347/kadt.2012.34.2.105
- Kim KB, Kim JH, Kim WC, Kim HY, Kim JH. Evaluation of the Marginal and Internal Gap of Metal-Ceramic Crown Fabricated with a Selective Laser Sintering Technology: Twoand Three- dimensional replica techniques. J Adv Prosthodont, 5(2), 179-86, 2013. https://doi.org/10.4047/jap.2013.5.2.179
- Dehurtevent M, Robberecht L, Behin P. Influence of dentist experience with with scan spray system used indirect CAD/CAM impressions. J Prosthet Dent, 113(1), 17-21, 2015. https://doi.org/10.1016/j.prosdent.2014.07.006
- Neves FD, Prado CJ, Prudente MS, Carneiro TA, Karla Zancope K, Davi LR, Mendonca G, Cooper LF, Soares CJ. Micro-Computed Tomography Evaluation of Marginal Fit of Lithium Disilicate Crowns Fabricated by Using Chairside Cad/Cam Systems or the Heat-Pressing Technique. J Prosthet Dent, 112(5), 1134-1140, 2014. https://doi.org/10.1016/j.prosdent.2014.04.028
- Oh SC, Dong JK, Luthy H, Scharer P. Strength and Microstructure of Ips Empress 2 Glass-Ceramic after Different Treatments. Int J Prosthodont, 13(6), 468-472, 2000.
- Oh SC, Shin YH. Esthetic restoration of upper anterior teeth by porcelain laminate veneer. J Dent Rehabil appl Sci, 19(1), 35-41, 2003.
- Schaefer O, Watts DC, Sigusch BW, Kuepper H, Guentsch A. Marginal and Internal Fit of Pressed Lithium Disilicate Partial Crowns in Vitro: A Three-Dimensional Analysis of Accuracy and Reproducibility. Dent Mater, 28(3), 320-326, 2012. https://doi.org/10.1016/j.dental.2011.12.008
- Sorensen, JA. A Standardized Method for Determination of Crown Margin Fidelity. J Prosthet Dent, 64(1), 18-24, 1990. https://doi.org/10.1016/0022-3913(90)90147-5
- Ural C, Burgaz Y, Sarac D. In Vitro Evaluation of Marginal Adaptation in Five Ceramic Restoration Fabricating Techniques, Quintessence Int, 41(7), 585-590, 2010.
- Van Noort R. Richard. The Future of Dental Devices is Digital. Dent Mater, 28(1), 3-12, 2012. https://doi.org/10.1016/j.dental.2011.10.014
- Zanotto ED. Bright Future for Glass-Ceramics. American Ceramics Society Bulletin, 89(8), 19-27, 2010.