• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.68-68
• /
• 2017

Measurements of solar wind speed near the Sun (< 0.1 AU) are important for understanding acceleration mechanism of solar wind as well as space weather predictions, but hard to directly measure them. For the first time, we provide 2D solar wind speed maps in the LASCO field of view using three consecutive days data. By applying the Fourier convolution and inverse Fourier transform, we decompose the 3D intensity data (r, PA, t) into the 4D one (r, PA, t, v). Then, we take the weighted mean along speed to determine the solar wind speeds that gives V(r, PA, t) in every 30 min. The estimated radial speeds are consistent with those given by an artificial flow and plasma blobs. We find that the estimated speeds are moderately correlated with those from slow CMEs and those from IPS observations. A comparison of yearly solar wind speed maps in 2000 and 2009 shows that they have very remarkable differences: azimuthally uniform distribution in 2000 and bi-modal distribution (high speed near the poles and low speed near the equator) in 2009.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.41-46
• /
• 2022

The superconducting properties of high temperature superconducting (HTS) GdBCO coated conductor (CC) tape (Ag/GdBCO/Buffer-layers/Stainless Steel) were investigated, specifically a series of samples prepared by vacuum heat treatment (200℃ to 600℃), using a Quantum Design PPMS-14. The critical current density J_c value was obtained by applying the modified Bean model to the irreversible magnetization ∆M_irr(H) data which was estimated from the magnetization M(H) loop. The reduction rates of lnJ_c and T_c values according to the increase of the vacuum annealing temperature T_an were d(lnJ_c)/dT_an = - 0.016 A/(cm²∙℃) and dT_c/dT_an = - 0.24, respectively. We examined the effect of recovery temperature T_re (475℃ to 700℃) and recovery duration time t (0.5 h to 24 h) on the restoration of previously completely lost superconductivity in samples that subsequently received heat treatment in an O₂ gas flow space. All samples were fully restored to superconductivity by heat treatment in an O₂ gas flow space. The recovery temperatures T_re (475℃ to 700℃) and recovery duration times t (0.5 h to 24 h) were both independent of the superconductivity recovery characteristics.

• Bulletin of the Korean Mathematical Society
• /
• v.47 no.3
• /
• pp.551-561
• /
• 2010

In this paper we give a new characterization of real hypersurfaces of type B, that is, a tube over a totally geodesic $\mathbb{Q}P^n$ in complex two-plane Grassmannians $G_2(\mathbb{C}^{m+2})$, where m = 2n, with the Reeb vector $\xi$ belonging to the distribution $\mathfrak{D}$, where $\mathfrak{D}$ denotes a subdistribution in the tangent space $T_xM$ such that $T_xM$ = $\mathfrak{D}{\bigoplus}\mathfrak{D}^{\bot}$ for any point $x{\in}M$ and $\mathfrak{D}^{\bot}=Span{\xi_1,\;\xi_2,\;\xi_3}$.

• Journal of The Korean Astronomical Society
• /
• v.50 no.1
• /
• pp.7-20
• /
• 2017

We carry out the study of $850{\mu}m$ sources in a part of the XMM-LSS field. The $850{\mu}m$ imaging data were obtained by the SCUBA-2 on the James Clerk Maxwell Telescope (JCMT) for three days in July 2015 with an integration time of 6.1 hours, covering a circular area with a radius of 15'. We choose the central area up to a radius of 9'.15 for the study, where the noise distribution is relatively uniform. The root mean square (rms) noise at the center is 2.7 mJy. We identify 17 sources with S/N > 3.5. Differential number count is estimated in flux range between 3.5 and 9.0 mJy after applying various corrections derived by imaging simulations, which is consistent with previous studies. For detailed study on the individual sources, we select three sources with more reliable measurements (S/N > 4.5), and construct their spectral energy distributions (SEDs) from optical to far-infrared band. Redshift distribution of the sources ranges from 0.36 to 3.28, and their physical parameters are extracted using MAGPHYS model, which yield infrared luminosity $L_{IR}=10^{11.3}-10^{13.4}L_{\odot}$, star formation rate $SFR=10^{1.3}-10^{3.2}M_{\odot}yr^{-1}$ and dust temperature $T_D=30-53K$. We investigate the correlation between $L_{IR}$ and $T_D$, which appears to be consistent with previous studies.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.211-214
• /
• 2015

We investigated the period variation for 79 eclipsing binary systems using 20 years (1990-2009) of EROS, Macho, and OGLE survey observations. We discovered 9 apsidal motions, 8 mass transfers, 5 period increasing and decreasing systems, 12 light-travel-time effects, 5 eccentric systems and 40 other systems showing no period variations. We select 3 representative eclipsing binary systems; EROS 1052 for apsidal motion, EROS 1056 for mass transfer, and EROS 1037 for the light-travel-time effect. We determine the period variation rate (dP/dt), orbital parameters of the 3rd body (e3, ${\omega}_3$, $f(m_3)$, $P_3$, $T_3$), apsidal motion parameters ($d{\omega}/dt$, U, Ps, Pa, e) and apsidal motion period by analyzing the light curves and O-C diagrams.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.340-344
• /
• 1998

A facile synthesis of 4,5-(1',2'-diphenylethylenedithio)-1,3-dithiole-2-thione (dPhEDT-DTT) is carried out via a Diels-Alder type [2+4] cycloaddition reaction of 1,3-dithiol-2,4,5-trithione oligomer and t-stilbene. Molecular structure of dPhEDT-DTT is determined by x-ray crystallography: space group P1, a=11.694(3) Å, b=12.117(3) Å, c=14.688(3) Å, α=113.12(2)°, β=102.23(2)°, γ=107.02(2)°, V= 1699.1(7) Å3, Z=2. It turns out that dPhEDT-DTT crystallizes as a racemic compound consisting of (R,R) and (S,S) enantiomers. Coupling reaction of dPhEDT-DTO undergone in neat P(OEt)3 yields TTF(SEt)4 instead of ET derivative. When PR3 (R=OEt, OPh, Ph) is used in benzene, toluene or xylene, however, dPhEDT-DTO is decomposed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.7 no.1
• /
• pp.7-11
• /
• 1980

6877 children who visited to pedodontic department from 1976 to 1979, were surveyed on the state of dental caries, therapic inclination a year and yearly tendency of treatment. The results were as follows ; 1. The prevalence of dental caries tended to show the increase in general year by year. 2. Girls had higher d.e.f. T. & S. index and D.M.F. T. & S. index than boys generally. 3. Distribution of therapy a year. (1979) Amalgam Filling 4464 Pulpotomy 952 S.P.-Crown 1538 Gold Inlay 250 Space Maintainer 341 Extraction 1313 Orthodontic Appliance 206 4. Tendency of treatment in 1979 (compared with 1976) No. of new patients 87.5% increased Amalgam Filling 50.0% increased Extraction 31.4% increased Orthodontic Appliance 267.9% increased S.P.-Crown 225.8% increased Gold Inlay 27.8% decreased Space Maintainer 2.3% decreased Pulpotomy 20.5% decreased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.340-347
• /
• 2008

A prototype of 3D clothing design system with a direct pattern development function was suggested, reflecting intuitive design functions and design modifications while considering the fit of clothing patterns with the 3D human body in the virtual 3D space. The research method was as follows. Clothing models were created using a 3D design tool, 3ds max on the surface of 3D human body model made by scanning an actual human body. 3D illustrations were completed by revising the fit and sizing of the human body and clothing models. 2D T-shirt pattern was produced 3D illustrations using from a 3D scanning data modeling solution RapidForm 2004, a 2D conversion program for 3D data called 2C-AN, and Yuka CAD. As a result, the following conclusions were made. The fit of the clothing and human body can be adjusted by reflecting individual body figure characteristics and 3D illustrations over the actual 3D body model. Furthermore, intuitive design support functions were intensified overcoming the weak point of existing 3D clothing design system by developing the direct clothing design in the virtual 3D space. 3D illustration design modifications can be directly reflected on clothing patterns from 3D illustrations by 3D clothing design system developed in this study.

• Journal of the Korean Statistical Society
• /
• v.3 no.1
• /
• pp.13-16
• /
• 1974

In my former paper [3] I defined an almost periodicity of weakly sationary random processes (a.p.w.s.p.) and presented some basic results of it. In this paper I shall present some notes on the Fourier series of an a.p.w.s.p., resulting from [3]. All the conditions at the introduction of [3] are assumed to hold without repreating them here. The essential facts are as follows : The weakly stationary process $X(t,\omega), t\in(-\infty,\infty), \omega\in\Omega$, defined on a probability space $(\Omega,a,P)$, has a spectral representation $$X(t,\omega)=\int_{-\infty}^{infty}{e^{it\lambda\xi}(d\lambda,\omega)},$$ where $\xi(\lambda)$ is a random measure. Then, the continuous covariance $\rho(\mu) = E(X(t+u) X(t))$ has the form $$\rho(u)=\int_{-\infty}^{infty}{e^{iu\lambda}F(d\lambda)},$$ $E$\mid$\xi(\lambda+0)-\xi(\lambda-0)$\mid$^2 = F(\lambda+0) - F(\lambda-0) \lambda\in(-\infty,\infty)$, assumimg that $\rho(u)$ is a uniformly almost periodic function.

• The Mathematical Education
• /
• v.29 no.1
• /
• pp.41-45
• /
• 1990

S. Z. Wang, B. Y. Li, Z. M. Gao and K. Iseki proved some fixed point theorems on expansion mappings, which correspond some contractive mappings. In a recent paper, B. E. Rhoades generalized the results for in of mappings. In this paper, we obtain the following theorem, which generalizes the result of B. E. Rhoades. THEOREM. Let A, B, S and T be mappings from a complete metric space (X, d) into itself satisfying the following conditions: (1) ${\Phi}$(d(A$\chi$, By))$\geq$d(Sx, Ty) holds for all x and y in X, where ${\Phi}$ : R$\^$+/ \longrightarrowR$\^$+/ is non-decreasing, uppersemicontinuous and ${\Phi}$(t) < t for each t > 0, (2) A and B are surjective, (3) one of A, B, S and T is continuous, and (4) the pairs A, S and B, T are compatible. Then A, B, S and T have a unique common fixed point in X.