• Korean Journal of Clinical Laboratory Science
• /
• v.43 no.1
• /
• pp.12-18
• /
• 2011

The purpose of this study was to evaluate the significance of higher than normal mean corpuscular volume (MCV) and lower than normal mean corpuscular hemoglobin concentration (MCHC) in 20 patients. The hemoglobin (Hb), red blood cell indices (MCV, MCH, MCHC,), red cell distribution width (RDW), serum ferritin, serum iron (Fe) and total iron binding capacity (TIBC) were measured and the transferrin saturation were calculated. 18 (90.0%) cases were categorized as chronic diseases. Chronic renal failure, malignancy, and bleeding were all related to the cases. The mean values of hemoglobin was $9.5{\pm}2.14g/dL$; the MCV was $29.0{\pm}2.8fL$; the MCH was $30.9{\pm}1.0pg$; the MCHC was $31.2{\pm}0.5%$; the RDW was $17.0{\pm}3.6%$; serum Fe was $39{\pm}21{\mu}g/dL$; the TIBC was $219.7{\pm}108.8{\mu}g/dL$; transferrin saturation was $19.2{\pm}9.9%$ and ferritin was $445.5{\pm}499.6{\mu}g/L$ in the patients. The WHO criteria for hemoglobin of patients confirms anemia in 18 of the 20 (90.0%) cases. Anemia of chronic disease was shown in 11 (73.3%) cases; acute gastric ulcer with hemorrhage in 1 (6.7%) case; iron deficiency anemia in 1 (6.7%) case; 2 patients (13.3%) were of normal cases. There were changes in the baseline Hb level results of the 19 (95.0%) cases while no change was shown in 1 case. As a result, diseases associated with anemia and bleeding where the MCV is higher than the normal range and MCHC is lower than normal range are considered relevant findings.

• Korean Journal of Environmental Biology
• /
• v.24 no.2 s.62
• /
• pp.147-154
• /
• 2006

Effects of water temperature, salinity and irradiance on the growth of toxic dinoflagellate Alexandrium catenella (AlCt-01) were investigated, which was isolated from Jinhae Bay, Korea. The maximum growth of A. catenella strain was obtained at $150{\mu}E\;m^{-2}s^{-1}$. The ranges of temperature and salinity for the growth of the strain were $15\sim25^{\circ}C$ and $20\sim34$ PSU. The maximum growth rate of A. catenella determined was $0.45d^{-1}$ at $20^{\circ}C$, 30 PSU and $150{\mu}E\;m^{-2}s^{-1}$ We also examined the Se and Fe effects on the toxic dinoflagellate A. catenella in optimal growth conditions. As Fe concentration of medium increased from 0 to $11.7{\mu}M$, growth rate of A. catenella increased and the maximum growth rate(k=0.48 $d^{-1}$) was obtained at $11.7{\mu}M$ of Fe cone. Growth of A. catenella were stimulated at> 1nM of Se.

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.28-38
• /
• 2008

This study was to investigate the influence of composite resins with different elastic modulus, cavity modification and occlusal loading condition on the stress distribution of restored notch-shaped noncarious cervical lesion using 3-dimensional (3D) finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity and a modified cavity with a rounded apex were modeled. Unmodified and modified cavities were filled with hybrid or flowable resin. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. The results were as follows: 1. In the unrestored cavity, the stresses were highly concentrated at mesial CEJ and lesion apex and the peak stress was observed at the mesial point angle under both loading conditions. 2. After restoration of the cavity, stresses were significantly reduced at the lesion apex, however cervical cavosurface margin, stresses were more increased than before restoration under both loading conditions. 3. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin. 4. Cavity modification the rounding apex did not reduce compressive stress, but tensile stress was reduced.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.275-275
• /
• 2017

Dressing is a seasoned mixture usually used as a stuffing in food. Quality characteristics and antioxidant activity of fruit dressing using lentil legume were investigated. The four groups were divided into D-1(fruit dressing purchased from the local market in Deagu, Korea), D-2 (grapefruit-sugaring dressing prepared with grapefruit sugaring and lentil legume paste), D-3 (vinegar dressing purchased from the local market in Deagu, Korea), D-4 (pineapple-vinegar dressing prepared with pineapple vinegar and lentil legume paste), and then they were analyzed with regard to general compositions, Hunter's color value, mineral and free amino acid content and antioxidant activities. The pH and titratable acidity in all samples ranged from 2.9 to 4.6 and from 0.6 to 1.2%, respectively. The crude protein content were 2.29% for D-2 dressing and 4.03 for D-4 sample, while were not detected D-1 and D-3 samples. In case of Hunter's value, The ' L'and 'a' values of all samples ranged from 45.98 to 56.54 and from -1.59 to 3.30, respectively. The D-4 sample exhibited the higher levels of Ca (215.40 mg/kg), K (1,105.83 mg/kg), Mg (233.63 mg/kg) and Fe (13.78 mg/kg). The levels of heavy metals (As, Pb, Cd and Hg) in all samples were not detected. The contents of total amino acid in D-3 and D-4 samples were 8.269 and 3.419 mg/mL, respectively. The highest contents of total phenols($191.13{\mu}g\;GAE/mL$) and DPPH radical scavenging activity(93.69%, Inhibition) were observed in D-4 sample.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1134-1136
• /
• 1993

The mean grain size of sample decreases with increasing the addition of $Al_2O_3$ in the basic composition of YIG. It is mean that the addition of $Al_2O_3$ is helpless the development of magnetic properties in YIG garnet, considering the relation of ${\mu}{\propto}D^{1/3}$. To increase addition of $Al_2O_3$ decreased the area of hysterisis loop. It is known that the addition of $Al_2O_3$ is help the development of magnetic properties in YIG garnet, considering the relation of loss component factor and the area of hysterisis loop. As a results, sample with the addition of $Al_2O_3$ 0.5 mol % among the fabricated samples is must effective in the magnetic properties of YIG Garnet.

• Journal of Applied Biological Chemistry
• /
• v.43 no.3
• /
• pp.141-146
• /
• 2000

Glycosidase activities were tested from the grape berries, Vitis labruscana B. Takasumi. Among various glycosidases, $\alpha$-D-galactosidase was found to be the most active in the flesh and other glycosidases were considerably active in the order of the following: $\alpha$-D-mannosidase>$\alpha$-D-glucosidase>$\beta$-D-glucosidase>$\beta$-D-galactosidase. In the seeds, $\alpha$-D-glucosidase activity was the highest and other glycosidases such as $\alpha$-D-galactosidase, $\beta$-D-glucosidase, and $\beta$-D-galactosidase were still significantly active. The $\alpha$-D-galactosidase in the grape flesh was purified over 83-folds through salting-out with $(NH_4)_2SO_4$ and a series of chromatographies employing Sephadex G-50, Octyl-Sepharose, Q-Sepha- rose, and Biogel P-100. The enzyme was a monomer of 45 kDs as determined through SDS-PAGE and Sephacryl S-200 chromatography. The purified enzyme showed a preference of $\alpha$-D-galactose to $\beta$-D-galactose as a substrate about 5.4 times. Sulfhydryl specific reagents such as N-ethylmaleimide and iodoacetamide significantly inhibited the enzyme activity to the extents of 48 and 52% of its initial activity, respectively. The optimumpH range of $\alpha$-D-galactosidase was around 6.5-7.0. The enzyme activity increased by 46% in the presence of 1mM $Fe^{2+}$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.126-133
• /
• 2013

Recently, it was reported that complaints about problems being experienced with the performance of vehicles operating on autogas in Korea. The problem was being assumed due to contaminants in LPG and an oily material which was being deposited in vaporizer, injector in LPG fuel system. This study is focused on the analysis of contaminant of automobile parts on LPG fuel system. The sampling points of contaminants are injectors, fuel filters, vaporizer in automobile equipment and it was also investigated by GC-MS, ICP-AES, SIMDIS and EDS. According to results, it was presumed that this contaminants had been analyzed plasticizers with hydrocarbons with high boiling point, Fe from steel corrosion, greases from gas station.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.220-223
• /
• 2006

BLT nanotubes were synthesized by using simple and convenient method template-wetting process. Porous alumina membranes were prepared by 2 step anodic oxidation as the template. To improve wetting properties and make low surface energy, BLT solution was mixed with polymer. Polymer was removed completely during annealing. After completely etching the template in 30 wt% KOH solution, we demonstrate that BLT nanotubes with a diameter of 200 nm can be fabricated. Grain growth process of BLT nanotubes during baking, and furnace annealing was examined by FE-SEM and XRD.

• Microbiology and Biotechnology Letters
• /
• v.2 no.3
• /
• pp.141-147
• /
• 1974

The cultural conditions for L-glutamate production were investigated using Brevibacterium flavum nov. sp. D2209B, the most productive strain among 5 strains reported in preceeding paper. A temperature of 3$0^{\circ}C$ and a medium volume of 30 ml per 500-flask were selected as standard culture conditions. And the following results were obtained. 1. When the concentration of acetate in the medium was below 30 g per litre, the maximum amount of L-glutamate was accumulated. 2. KH$_2$PO$_4$, MgSO$_4$, FeCI$_3$ and MnCI$_2$ were required for the L-glutamate poduction, but the concentration of those inorganic salts little effected. 3. Signifcant amount of L-glutamate was accutnulated in the limited biotin concentration less than 0.3 ug per litre. 4. The addition of malic acid or succinic acid enhanced the accumulation. 5. The L-glutamate accumulation was related to the incubation time of seed; the amount of L-glutamate accumulated was maximum by inoculating 16-20 hour incubated seed. 6. In the medium containing sufficient amount of biotin for growth, L-glutamate accumulation was stimulated by the addition of penicillin at appropreate time during incubation.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.132-139
• /
• 1997

This study was carried out to examine the kinetics and reaction mechanism of denitration with formic acid in the simulated radwaste solution containing 6 components such as Nd, Pd, Ru, Zr, Mo and Fe. All experiments were performed with the changes of initial nitric acid concentration, molar ratio of formic acid to nitric acid, and denitration time at $90^{\circ}C$ and a batch system. As results, destruction rate of nitric acid and formic acid was obtained as follows, respectively. $\frac{d[HNO_3]}{dt}=-4.842{\times}10^{-2}[HNO_3][HCOOH],\;\frac{d[HCOOH]}{dt}=-8.911{\times}10^{-2}[HNO_3][HCOOH]$ It was confirmed that denitration with formic acid was controlled by reaction mechanism suggested this study in the range of the initial nitric acid of 2~5M and $[HCOOH]/[HNO_3]$ of 1.5~2.0. In the 1M initial nitric acid, however, it was found that the nitric acid and the formic acid were decomposed by a different reaction mechanism.