Restorative Dentistry and Endodontics

The Korean Academy of Conservative Dentistry (대한치과보존학회)
권호 표지
DOI QR코드

DOI QR Code

Stress distribution of Class V composite resin restorations: A three-dimensional finite element study

5급 복합레진수복물의 응력분포에 관한 3차원 유한요소법적 연구

  • Park, Jeong-Kil (Department of Conservative Dentistry, School of Dentistry, Pusan National University) ;
  • Hur, Bock (Department of Conservative Dentistry, School of Dentistry, Pusan National University) ;
  • Kim, Sung-Kyo (Department of Conservative Dentistry, School of Dentistry, Kyungpook National University)
  • 박정길 (부산대학교 치의학전문대학원 치과보존학교실) ;
  • 허복 (부산대학교 치의학전문대학원 치과보존학교실) ;
  • 김성교 (경북대학교 치의학전문대학원 치과보존학교실)
  • Published : 2008.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study was to investigate the influence of composite resins with different elastic modulus, cavity modification and occlusal loading condition on the stress distribution of restored notch-shaped noncarious cervical lesion using 3-dimensional (3D) finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity and a modified cavity with a rounded apex were modeled. Unmodified and modified cavities were filled with hybrid or flowable resin. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. The results were as follows: 1. In the unrestored cavity, the stresses were highly concentrated at mesial CEJ and lesion apex and the peak stress was observed at the mesial point angle under both loading conditions. 2. After restoration of the cavity, stresses were significantly reduced at the lesion apex, however cervical cavosurface margin, stresses were more increased than before restoration under both loading conditions. 3. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin. 4. Cavity modification the rounding apex did not reduce compressive stress, but tensile stress was reduced.

본 연구는 3차원 유한요소 분석법적 연구를 통해 쐐기형 비우식성 치경부병소의 복합레진 수복물에서 다른 탄성계수를 가진 복합레진의 수복과 와동의 형태와 응력의 방향에 따른 응력분포의 영향에 대해 알아보고자 하였다. 발거된 상악 제2소구치를 Micro-CT로 스캔한 후 3D-DOCTOR로 3차원유한요소 모형을 제작하였다. 제작된 소구치 모형에 쐐기형 와동과 변형시킨 와동을 형성하고 각 와동을 탄성계수가 서로 다른 혼합형 복합레진 또는 흐름성 복합레진으로 수복하였다. 수복 전, 후 협측교두와 설측교두에 500N의 하중을 가한 후 응력분포를 ANSYS 프로그램을 이용하여 주 응력 분석법으로 평가한 바 다음과 같은 결과를 얻었다. 1. 수복 전 응력은 근심측 백악법랑경계와 와동저 선각부에 집중되었으며 최대응력은 근심협측우각부에서 나타났다. 2. 와동수복 후 와동저 선각의 응력은 현저히 감소했으나 치경부측 변연의 응력은 수복전보다 증가하였다. 3. 쐐기형태의 병소의 수복 시 와동저 선각부는 탄성계수가 높은 재료가 유리하고 치경부측 변연은 탄성계수가 낮은 재료가 유리하였다. 4. 와동저 선각부를 둥글게 변화시키는 것은 압축응력은 감소시키지 않으나 인장응력은 감소시켰다.

Keywords

References

  1. Levitch LC, Bader JD, Shugars DA, Heymann HO. Non-carious cervical lesion. J Dent 22:195-207, 1994 https://doi.org/10.1016/0300-5712(94)90107-4
  2. Litonjua LA, Bush PJ, Andreana S, Tobias TS. Effects of occlusal load on cervical lesion. J Oral Rehabil 31:225-232, 2004 https://doi.org/10.1046/j.0305-182X.2003.01226.x
  3. Telles D, Pegoraro LF, Pereira JC. Prevalence of noncarions cervical lesions and their relation to occlusal aspects: a clinical study. J Esthet Dent 12:10-15, 2000 https://doi.org/10.1111/j.1708-8240.2000.tb00193.x
  4. Palamara D, Palamara JE, Tyas MJ, Messer HH. Strain patterns in cervical enamel of teeth subjected to occlusal loading. Dent Mater 16:412-419, 2000 https://doi.org/10.1016/S0109-5641(00)00036-1
  5. Lee WC, Eakle WS. Possible role of tensile stress in etiology of cervical erosive lesions of teeth. J Prosthet Dent 52:374-380, 1984 https://doi.org/10.1016/0022-3913(84)90448-7
  6. Grippo JO. Abfractions: A new classification of hard tissue lesions of tooth. J Esthet Dent 3:14-19, 1991 https://doi.org/10.1111/j.1708-8240.1991.tb00799.x
  7. Rees JS. An investigation into the importance of the periodontal ligament and alveolar bone as supporting structures in finite element studies. J Oral Rehabil 28:425-432, 2001 https://doi.org/10.1046/j.1365-2842.2001.00686.x
  8. Rees JS. The effect of variation in occlusal loading on the development of abfraction lesions: a finite element study. J Oral Rehabil 29:188-193, 2002 https://doi.org/10.1046/j.1365-2842.2002.00836.x
  9. King PA. Adhesive techniques. Br Dent J 186:321- 326, 1999 https://doi.org/10.1038/sj.bdj.4800101a
  10. Osborne-Smith KL, Burke FJ, Wilson NH. The aetiology of the non-carious cervical lesion. Int Dent J 49:139-143, 1999 https://doi.org/10.1002/j.1875-595X.1999.tb00898.x
  11. Vandewalle KS, Vigil G. Guidelines for the restoration of class V lesions. Gen Dent 45:254-260, 1997
  12. Marzouk MA, Bhaiji AH. Influence of enamel cavosurface configuration on marginal leakage in class V composite resin restorations. Am J Dent 2:165-169, 1989
  13. Saunders WP, Muirhead JM. Microleakage of composite restorations with Syntac Bond and Denthesive. Am J Dent 5:255-257, 1992
  14. Lee WC, Eakle WS. Stress-induced cervical lesions: review of advances in the past 10 years. J Prosthet Dent 75:487-494, 1996 https://doi.org/10.1016/S0022-3913(96)90451-5
  15. Leinfelder KF. Restoration of abfracted lesions. Compendium 15:1396-1400, 1994
  16. Hakimeh S, Vaidyanathan J, Houpt ML, Vaidyanathan TK, Von Hagen S. Microleakage of compomer class V restorations: effect of load cycling, thermal cycling, and cavity shape differences. J Prosthet Dent 83:194- 203, 2000 https://doi.org/10.1016/S0022-3913(00)80012-8
  17. Katona TR, Winkler MM. Stress analysis of a bulkfilled class V light-cured composite restoration. J Dent Res 73:1470-1477, 1994 https://doi.org/10.1177/00220345940730081201
  18. Geramy A, Sharafoddin F. Abfraction: 3D analysis by means of the finite element method. Quintessence Int 34:526-533, 2003
  19. Le SY, Chiang HC, Huang HM, Shih YH, Chen HC, Dong DR, Lin CT. Thermo-debonding mechanisms in dentin bonding systems using finite element analysis. Biomaterials 22:113-123, 2001 https://doi.org/10.1016/S0142-9612(00)00086-7
  20. Litonjua LA, Andreana S, Patra AK, Cohen RE. An assessment of stress analyses in the theory of abfraction. Biomed Mater Eng 14:311-321, 2004
  21. Kuroe T, Itoh H, Caputo AA, Konuma M. Biomechanics of cervical tooth structure lesions and their restoration. Quintessence Int 31:267-274, 2000
  22. Kemp-Scholte CM, Davidson CL. Marginal integrity related to bond strength and strain capacity of composite resin restorative systems. J Prosthet Dent 64:658- 664, 1990 https://doi.org/10.1016/0022-3913(90)90291-J
  23. Yaman SD, Sahin M, Aydin C. Finite element analysis of strength characteristics of various resin based restorative materials in class V cavities. J Oral Rehabil 30:630-641, 2003 https://doi.org/10.1046/j.1365-2842.2003.01028.x
  24. Nakayama WT, Hall DR, Grenoble DE, Katz JL. Elastic properties of dental resin restorative materials. J Dent Res 53:1121-1126, 1974 https://doi.org/10.1177/00220345740530050901
  25. Willems G, Lambrechts P, Braem M, Celis JP, Vanherle G. A classification of dental composites according to their morphological and mechanical characteristics. Dent Mater 8:310-319, 1992 https://doi.org/10.1016/0109-5641(92)90106-M
  26. Heymann HO, Sturdevant JR, Bayne S, Wilder AD, Sluder TB, Brunson WD. Examining tooth flexure effects on cervical restorations: a two-year clinical study. J Am Dent Assoc 122:41-47, 1991 https://doi.org/10.1016/S0002-8177(91)25015-1
  27. Browning WD, Brackett WW, Gilpatrick RO. Retention of microfilled and hybrid resin-based composite in noncarious class 5 lesions: a double-blind, randomized clinical trial. Oper Dent 24:26-30, 1999
  28. Hubsch PF, Middleton J. Asymptotic analysis of the stress field in adhering dental restorations. J Biomech Eng 122:408-415, 2000 https://doi.org/10.1115/1.1286564
  29. Ugural AC, Fenster SK Advanced strength and applied elasticity 4th ed. Pearson Education Inc., New Jersey, pp.163-168, 2003
  30. Ghfiri R, Amrouche A, Imad A, Mesmacque G. Fatigue life estimation after crack repair in 6005 A-T6 aluminium alloy using the cold expansion hole technique. Fatigue Fract Engng Mater Struct 23:911-916, 2000 https://doi.org/10.1046/j.1460-2695.2000.00356.x
  31. Bowen RL, Rodriguez MS. Tensile strength and modulus of elasticity of tooth structure and several restorative materials. J Am Dent Assoc 64:378-387, 1962 https://doi.org/10.14219/jada.archive.1962.0090
  32. Lehman ML. Tensile strength of human dentin. J Dent Res 46:197-201, 1967 https://doi.org/10.1177/00220345670460011001

Cited by

  1. The influence of combining composite resins with different elastic modulus on the stress distribution of Class V restoration: a three-dimensional finite element study vol.33, pp.3, 2008, https://doi.org/10.5395/JKACD.2008.33.3.184
  2. Stress analysis of maxillary premolars with composite resin restoration of notch-shaped class V cavity and access cavity; Three-dimensional finite element study vol.33, pp.6, 2008, https://doi.org/10.5395/JKACD.2008.33.6.570
  3. Finite element analysis of maxillary central incisors restored with various post-and-core applications vol.34, pp.4, 2009, https://doi.org/10.5395/JKACD.2009.34.4.324