• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.257-266
• /
• 1999

This paper presents a method of seismic analysis for a cylindrical liquid storage structure on/in horizontally layered half.space considering the effects of the interior fluid and exterior soil medium in the frequency domain. To capture the essence of fluid-structure-soil interaction effects effectively, a mixed finite element with two-field (u, p) approximation is employed to model the compressive inviscid fluid, while the structure and soil medium are presented by the 3-D axisymmetric finite elements and dynamic infinite elements. The present FE-based method can be applied to the system with complex geometry of fluid region as well as with inhomogeneous near-field soil medium, since it can directly model both the fluid and the soil. For the purpose of verification, dominant peak frequencies in transfer functions for horizontal motions of cylindrical fluid storage tanks with rigid massless foundation on a homogeneous viscoelastic half.space are compared with those by two different added mass approaches for the fluid motion. The comparison indicates that the Present FE-based methodology gives accurate solution for the fluid-structure-soil interaction problem. Finally, as a demonstration of versatility of the present study, a seismic analysis for a real-scale LNG storage tank embedded in layered half.space is carried out, and its member forces along the height of the structure are compared with those by an added mass approach developed by the present writers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.26-33
• /
• 2003

Based on detailed FE limit analyses, the present paper provides tractable approximations fer plastic limit pressure solutions fur axially through-wall-cracked pipe; axially (inner) surface-cracked pipe; circumferentially through-wall-cracked pipe; and circumferentially (inner) surface-cracked pipe. In particular, for surface crack problems, the effect of the crack shape, the semi-elliptical shape or the rectangular shape, on the limit pressure is quantified. Comparisons with existing analytical and empirical solutions show a large discrepancy in circumferential short through-wall cracks and in surface cracks (both axial and circumferential). Being based on detailed 3-D FE limit analysis, the present solutions are believed to be the most accurate, and thus to be valuable information not only for plastic collapse analysis of pressurised piping but also for estimating non-linear fracture mechanics parameters based on the reference stress approach.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.74-78
• /
• 2002

For human detecting pyroelectric infrared sensor system using more than 2 sensor devices. By new top and bottom electrode design, 1 sensor can sensing human instead of using 2 sensor system. The poled P(VDF/TrFE) film used for sensor pyroelectric materials. The fabricated sensors NEP (noise equivalent power) and specific detectivity D$^*$ of the device were 9.62 $\times$ 10$10^5$ V/W, 3.95 $\times$ 10$10^-175$ W and 5.06 $\times$ 10$10^5$W under emission energy of 13 ${\mu}W/cm^2$ respectively and It's result is almost same result that using more than 2 sensor system for human detecting.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.258-261
• /
• 2011

A ferroelectric $(Bi,La)_4Ti_3O_{12}$ (BLT) thin film fabricated by the pulsed-DC sputtering method was evaluated on a cell structure to check its compatibility to high density ferroelectric random access memory (FeRAM) devices. The BLT composition in the sputtering target was $Bi_{4.8}La_{1.0}Ti_{3.0}O_{12}$. Firstly, a BLT film was deposited on a buried Pt/$IrO_x$/Ir bottom electrode stack with W-plug connected to the transistor in a lower place. Then, the film was finally crystallized at $700^{\circ}C$ for 30 seconds in oxygen ambient. The annealed BLT layer was found to have randomly oriented and small ellipsoidal-shaped grains (long direction: ~100 nm, short direction: ~20 nm). The small and uniform-sized grains with random orientations were considered to be suitable for high density FeRAM devices.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.1
• /
• pp.19-31
• /
• 2003

Chemical composition, crystal structure, refractive index, specific gravity, color, and luster were studied fur pyrope-almandine series garnets. The main coloring agents determining the reddish or brownish garnets were also investigated. It was also examined if there is any relationship between mineralogical properties with respect to the various chemical compositions in the solid solution, in the hope to figure out the existing classification values of R.I. and S.G. using gem- testing facilities to distinguish pyrope from almadine. It was found that 17 out of the 24 specimens belong to pyrope and the rest almandine. R.I. of pyrope goes up to 1.77 and that of almandine is higher than the value.5.5. of pyrope reaches to 3.88 and that of almandine is greater than the value of pyrope. X-ray diffraction data revealed that pyrope-almandine garnets are isometric with space group Ia3d, and also show that the variation of cell parameters are not significant enough to parallel with the chemical compositions of the series. R.I. and S.G. increase with FeO content. Fe and Mn are most responsible to the red-purple and orange coloration of the specimens, respectively. Both zircon and rutile crystals are most common inclusions in the reddish stones.

• Journal of Energy Engineering
• /
• v.29 no.3
• /
• pp.18-24
• /
• 2020

In this study, a lightweight wide impeller for large-area surface treatment was designed and structural stability was confirmed based on finite element(FE) analysis. A lightweight bracket FE model was established through topology optimization, and the optimal FE model was selected after structural analysis. The bending deformation FE analysis was performed, and bending deformation was included in the allowable deformation range. In addition, FE modal analysis was performed, and the range of safe speed(RPM) by rotation was suggested. Ultimately, it was confirmed that this analytical technique is effective for design the lightweight wide impeller.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.245-249
• /
• 2013

A finite element model was built for MnBi/${\alpha}$-Fe nanocomposite permanent magnets, and the demagnetization curves of the magnets were simulated by micro-magnetic calculation. The microstructure of the cubic model is composed of 64 irregular grains with an average grain size of 20 nm. With the volume fraction of soft magnetic phase (t vol. %) ranged from 5 to 20 vol. %, both isotropic and anisotropic nanocomposite magnets show typical single-phase permanent magnets behavior in their demagnetization curves, illustrating good intergranular exchange coupling effect between soft and hard magnetic phases. With the increase of volume fraction of soft magnetic phase in both isotropic and anisotropic magnets, the coercive force of the magnets decreases monotonically, while the remanence rises at first to a peak value, then decreases. The optimal values of maximum energy products of isotropic and anisotropic magnets are 84 and $200kJ/m^3$, respectively. Our simulation shows that the MnBi/${\alpha}$-Fe nanocomposite permanent magnets own excellent magnetic properties and therefore good potential for practical applications.

• Membrane and Water Treatment
• /
• v.11 no.3
• /
• pp.207-215
• /
• 2020

Vivianite (Fe₃²⁺(PO₄)2·8H₂O) and green rust ([Fe₄²⁺Fe₂³⁺(OH)^-₁₂][SO₄^2-·2H₂O]^2-), ferrous containing minerals, could remove aqueous U(VI) in 5 min. and the efficiencies of green rust were roughly 2 times higher than that of vivianite. The zeta potential measurement results implies that the better performance of green rust might be attributed to the favorable surface charge toward uranyl phosphate species. The removal behaviors of the minerals were well fitted by pseudo-second order kinetic model (R² > 0.990) indicating the dominant removal process was chemical adsorption. Effects of Ca²⁺ and CO₃^2- at pH 7 were examined in terms of removal kinetic and capacity. The kinetic constants of aqueous U(VI) were 8 and 13 times lower (0.492 × 10^-3 g/(mg·min); 0.305 × 10^-3 g/(mg·min)) compared to the value in the absence of the ions. The thermodynamic equilibrium calculation showed that the stable uranyl species (uranyl tri-carbonate) were newly formed at the condition. Surface investigation on the reacted mineral with uranyl phosphates species were carried out by XPS. Ferrous iron and U(VI) on the green rust surface were completely oxidized and reduced into Fe(III) and U(IV) after 7 d. It suggests that the ferrous minerals can retard U(VI) migration in phosphate-rich groundwater through the adsorption and subsequent reduction processes.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.42-42
• /
• 2012

팥에 함유되어있는 색소와 관련된 연구 중에서는, 검정팥의 색소성분을 분리하여 delphinidin-3-glucoside(D-3-G)로 보고한 Sasanuma의 연구와 검정팥 껍질속에 포함된 안토시아닌의 함량을 평가한 Yoshida의 연구 결과 등이 있다. 본 연구에서는 검정팥 종피에서 색소를 추출하여, 적정 염색조건을 설정하였으며, 매염제별 색상변화 및 견뢰도를 측정하는 과정을 통해 염색 특성을 파악하여 새로운 천연염재로서의 활용 가능성을 진단하였을 뿐만 아니라 응용 연구를 위한 기초자료의 확보에 주안점을 두었다. pH에 따른 염색성에서는 견직물의 경우 pH 4에서 가장 염착량이 많았고, 면직물의 경우에는 주어진 범위내에서는 pH가 높을수록 염착량이 많았다. 염색온도와 시간에 따른 염색성은, 견직물의 경우, 염색온도 $80^{\circ}C$에서는 시간이 경과할수록 K/S 값이 크게 나타났으며, 면직물의 경우도 견직물과 비슷한 결과로 온도가 높아질수록 염색시간이 경과될수록 K/S 값이 크게 나타났다. 견직물에 대한 매염제 종류별 표면색의 변화에서는 Fe 매염포만 $YR{\rightarrow}Y$ 로 변화되었을 뿐 다른 매염제에서는 매염 후에도 색상 변화는 크지 않았다. 매염처리 전 견직물의 일광 견뢰도는 무매염이 4~6등급, Al 처리포는 4~5등급, Cu와 Sn은 3~4등급으로 나타났고 Fe는 2~3등급으로 가장 낮게 나타났으며, 세탁견뢰도에서는 무매염 2등급, 매염제 처리의 경우 2~3등급으로 나타났다. 무매염 면직물의 일광견뢰도는 1~2 등급, Fe 매염은 2~3등급, Cu 2등급 Al과 Sn은 1~2등급으로 매염처리에 의해 전혀 개선되지 않았으며, 세탁견뢰도의 경우 Cu매염이 4등급으로 양호하게 나타났으며 무매염, Al, Sn과 Fe는 3등급으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.11
• /
• pp.990-996
• /
• 1994

New ferrocene-based chelate amines, $Fe[C_5H_4CH(Me)NMe_2]_2\;(3), \;Fe[C_5H-3(CH(Me)NMe_2)(PPh_2)-1,2]_2\;(4),\;(C_5H_5)Fe(C_5H_3(CH_2NMe_2)(CH(CN)NMe_2-1,2)\;(6),\;and\;(C_5H_5)Fe(C_5H_3(CH_2NMe_2)(CH(Me)NMe_2-1,2)$ (7) have been prepared. The reaction and the coordination chemistry of 4 and other related compounds (S,R)-(1-N,N-dimethylaminoethyl)-2-dicyclohexylphosphino)ferrocene (CPFA) and 1,1'-bis-(diphenylphosphino)ferrocene (BPPF) with $Rh_2(OAc)_4(MeOH)_2$ were investigated. The reaction of the chiral ligand (S,R)-CPFA forms a complex of the type (${\eta}^1$-(S,R)-CPFA-P)$_2Rh_2(OAc)_4$ (8) in which the ligand is coordinated to both rhodium centers in a monodentate fashion through phosphorus. In contrast, the bisphosphine analogues such as BPPF and 4 afford chelate complexes of the type (${\eta}^2-PP)Rh_2(OAc)_4$ (9 & 10) where both ligands act as a chelate bidentate to a single rhodium atom. All these complexes were characterized by microanalytical and spectroscopic techniques. In one case, the structure of 8 was determined by X-ray crystallography. Crystals are monoclinic, space group C2 (No. 5), with a=26.389 (3), b=12.942 (1), c=11.825 (1) A, ${\beta}$=111.22(1)$^{\circ}$, V=3964.7 (8) $A^3$, Z=4, and $D_{calc}$=1.58 g $cm^{-3}$. Two Rh(II) centers are bridged by four $AcO^-$ groups in the ${\eta}^1$ : ${\eta}^1$ mode across a Rh-Rh single bond, and octahedral coordination at Rh(1) and Rh(1') is completed by axially coordinating (S,R)-CPFA and a briding $AcO^-$, respectively.