• 디자인학연구
• /
• 제14권
• /
• pp.109-119
• /
• 1996

디자인 작업환경에 있어서 가장 중요한 요소는 관련분야의 정보를 체계적으로 종합화 할 수 있는 디자인 프로세스이다. 특히 급속하게 발전하고 있는 컴퓨터 테크놀러지로 인해 이제 디자이너는 새로운 테크놀러지에 능동적으로 대처해야만 한다. 또한 그러한 프로세스에 알맞은 통합시스템 개발에 적극적으로 참여 할 수 있어야 한다. 이에 본 연구는 최근에 와서 많은 진행되고 있는 컴퓨터를 응용한 제품디자인 개발 단에서 워크스테이션의 모델 링 과정을 살펴보고, 3차원 모델 링 한 3D 데이타를 기구 설계 부서에서 그대로 활용할 수 있는지를 택시미터기 디자인 개발사례를 통해, 도면 드로 인 틀로 많이 사용하는 오토캐드용 데이터로 전환으로 방법을 제시하였다. 워크스테이션으로 3차원 모델 링 한 데이터를 기구 설계 엔지니어가 사용 가능한 형태의 데이터로 전달함으로서 빠른 시간 내에 생산에 전달할 수 있도록 하여, 디자인 부서에서 3차원 모델 링 한 데이터를 설계 부서 생산 부서에서 합리적으로 활용할 수 있는 기틀을 마련하는 것을 목적으로 하였다.

• 대한치과기공학회지
• /
• 제38권3호
• /
• pp.127-133
• /
• 2016

Purpose: Currently advanced in Dental CAD/CAM technology increase a use of Co-Cr sinter metal block at Dental CAD/CAM part traditionally it has been being used with metal casting method. There is an advantage that can leave out a step of investment and casting as well as reducing a working time to compare with conventional casting method in a dry milling. Methods: In this research, compare a deformation of before and after sinter result of Co-Cr sinter metal block. Design a specimen figure by 3D CAD software and transformed it to a STL file can be used at Dental CAD/CAM. With a transformed STL file, milled a Co-Cr sinter metal specimen by using a Dental CAD/CAM dry milling machine. It arrived at the following conclusions after measuring an outer form and thickness of a machined specimen and then after sinter measure it again in a way of before sinter measurement method. Results: It is confirmed that there is no error while a 3D design figure specimen is transformed to a Dental CAD data. It is observed that there is no error at Co-Cr sinter metal specimen which consider a length of single coping and bridge. Conclusion: It is observed that there is no deformation at a specimen of AS05 and AB05 are made of 0,5mm thickness. On the other hand, the out of range of deformation is observed at a specimen of AS10 and AB10 which are made of 1mm thickness.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.31-40
• /
• 1992

본 연구에서는 CAD 시스템의 테이터구조로 부터 특성을 추출하여 CAPP 시스템 의 입력으로 사용되는 형상특징을 자동적으로 인식하고 형상특징의 관련정보를 생성하 는 형상특징인식시스템을 개발하는데 있다. X.Y.Z 축에 수직인 평면들로 구성되는 비회전형상부품을 대상으로 하여, 주로 밀링작업과 연관이 있는 관통슬롯, 막힌슬롯, 관통스텝, 막힌스텝, 포켓의 5가지 형상특징을 자동적으로 인식하는데 특히 X.Y.Z축에 수직인 평면들로 구성되고 내부에 볼록 부위가 업는 형상 특징을 대상으로 한다. CAD시스템은 AutoCAD를 사용하여 퍼스널 컴퓨터에서 시스템을 개발한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.142-145
• /
• 2004

More complex geometric shapes, including freeform surfaces, are adopted for the design of products to emphasize styling or aesthetics. Modeling of these products is extremely difficult, and often impossible. Reverse engineering is an emerging technology that can resolve this problem by generating CAD models from the physical mockups or prototype models. The laser scanner if often used to acquire the surface information of the part, but is limited in its measuring direction, which if fixed only along the z-axis. A Designed fixture of new shape to supplement these problems in this paper. The new fixture using several joints and an tooling ball holder is designed considering the convenience of the part set-up and the accuracy of the registration. The location of the tooling balls can be arranged to avoid the occlusion of the part and to minimize the registration error. The new fixture is apply to an object part having freeform surfaces to verify the effectiveness of the proposed design.

• Journal of Computational Design and Engineering
• /
• 제1권3호
• /
• pp.161-172
• /
• 2014

This paper presents three different search engines for the detection of CAD-parts in large databases. The analysis of the contained information is performed by the export of the data that is stored in the structure trees of the CAD-models. A preparation program generates one XML-file for every model, which in addition to including the data of the structure tree, also owns certain physical properties of each part. The first search engine is specializes in the discovery of standard parts, like screws or washers. The second program uses certain user input as search parameters, and therefore has the ability to perform personalized queries. The third one compares one given reference part with all parts in the database, and locates files that are identical, or similar to, the reference part. All approaches run automatically, and have the analysis of the structure tree in common. Files constructed with CATIA V5, and search engines written with Python have been used for the implementation. The paper also includes a short comparison of the advantages and disadvantages of each program, as well as a performance test.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.71-79
• /
• 2002

A new rapid prototyping process, Variable Lamination Manufacturing using a 4-axis-controlled hotwire cutter and expandable polystyrene foam sheet as a laminating material of the part (VLM-S), has been developed to reduce building time and to improve the surface finish of parts. The objective of this study is to reconstruct the surface of the original 3D CAD model in order to generate mid-slice data using the advancing front technique. The generation of 3D layers by a 4 axis-controlled hot-wire cutter requires a completely different procedure to generate toolpath data unlike the conventional RP CAD systems. The cutting path data for VLM-S are created by VLM-Slicer, which is a special CAD/CAM software with automatic generation of 3D toolpath. For the conventional sheet type system like LOM, the STL file would be sliced into 2D data only. However, because of using the thick layers and a sloping edge with the firstorder approximation between the top and bottom layers, VLM-Slicer requires surface reconstruction, mid-slice, and the toolpath data generation as well as 2D slicing. Surface reconstruction demands the connection between the two neighboring cross-sectional contours using the triangular facets. VLM-S employs thick layers with finite thickness, so that surface reconstruction is necessary to obtain a sloping angle of a side surface and the point data at a half of the sheet thickness. In the process of the toolpath data generation the surface reconstruction algorithm is expected to minimize the error between the ruled surface and the original parts..

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.270-275
• /
• 2008

자동차용 직선 베벨기어는 대량으로 생산되고 있기 때문에 생산성 향상을 위해 기어가공용 전용기에서 직접 가공하던 것을 냉간 단조 제조방식으로 변경되어 생산되고 있다. 시행착오를 최소화하여 단조에 의한 정확한 최종 형상의 정밀 제품을 조기에 개발하고, 반복 재현성을 확보하는 방법으로 CAD/CAM 시스템의 도입이 필요하다. 본 연구에서는 CAD/CAM 시스템을 활용하여 크라운 치형을 갖는 직선 베벨기어를 모델링 한다. 이를 토대로 NC 데이터 생성과 검증을 통해 가공품을 사전에 예측을 한 후 물림시험의 결과를 통해 마스터 기어를 제작한다. 이러한 마스터기어를 통하여 금형제작이나 가공에 필요한 지그제작을 가능하게 한다.

• Journal of Computational Design and Engineering
• /
• 제2권2호
• /
• pp.96-104
• /
• 2015

Aluminum die casting is an important manufacturing process for mechanical components. Die casting is known to be more accurate than other types of casting; however, post-machining is usually necessary to achieve the required accuracy. The goal of this investigation is to develop machining- free aluminum die casting. Improvement of the accuracy of planar and cylindrical parts is expected by correcting metal molds. In the proposed method, the shape of cast aluminum made with the initial metal molds is measured by 3D scanning. The 3D scan data includes information about deformations that occur during casting. Therefore, it is possible to estimate the deformation and correction amounts by comparing 3D scan data with product computer-aided design (CAD) data. We corrected planar and cylindrical parts of the CAD data for the mold. In addition, we corrected the planar part of the metal mold using the corrected mold data. The effectiveness of the proposed method is demonstrated by evaluating the accuracy improvement of the cast aluminum made with the corrected mold.

• 대한인간공학회지
• /
• 제24권2호
• /
• pp.85-91
• /
• 2005

To understand the basic relationship between 3D curved surface model and 2D pattern, simplified torso model was generated by commercial CAD program (IDEAS). 3D torso model was then divided into different blocks and unfolded into a flat pattern as in ordinary works of clothing item design. As results, 2D pattern development of different part of 3D torso model was attempted and analyzed mathematically. It was found that different height, radius and tangent slope of 3D blocks resulted in different 2D pattern. The relationships between the shape parameters of 3D torso blocks and those of 2D patterns were analyzed using regression equations. Direct way of drawing a 2D pattern of corresponding 3D torso block was also illustrated for the convenience of pattern making using conventional measurements of upper/ lower radii and height of 3D torso block.

• 소성∙가공
• /
• 제16권3호
• /
• pp.163-171
• /
• 2007

Due to the complicated character of the hemming process for automobile panels, it is very difficult to setup a consistent and reliable die design guide rule that require subtle decision of experienced experts and multiple trials during hemming die design and making. In this paper an automatic die design system of hemming units is pursued by presenting some algorithms, in which geometric data and constraints of the hemming units were converted to formula. The geometries and kinematics of all part for two kinds of hemming units, 2-link type and 4-link type were analysed kinematically to build the design algorithm. The algorithms were verified by automatic drawing used AutoCAD VBA program in example for the hemming unit design of a bonnet.