• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.40-43
• /
• 2001

The use ef sheet material for the hydroforming of a closed hollow body out of two sheet metal blanks is a new class of hydroforming process. By using a three-dimensional finite element program, called HydroFORM-3D, the hydroforming process of sheet metal pairs is analyzed. Also the comparison of conventional deep-drawing and hydroforming process was conducted. The simulation has concentrated on the influences of the various forming conditions, such as the unwelded or welded sheet metal pairs and friction condition, on the hydroforming process. This computational approach can prevent time-consuming trial-and-error in designing the expensive die sets and hydroforming process of sheet metal pairs.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.80-82
• /
• 2007

This paper presents the overhang effects of a novel axial flux permanent magnet (AFPM) machine, which consist of the segmented stator and fractioned slot windings, with one rotor and double stator. In addition, the overhang effect of permanent magnet of the motor has been analyzed quantitatively. The overhang is used to enhance the force density in permanent magnet machine. According to the variation of overhang length, the flux density distribution and torque are quantitatively compared. For these analysis, three dimensional finite element method (3D FEM) has been used in this paper. From the results, the proper overhang length of PM is selected to improve the performance of the AFPM machine.

• Structural Engineering and Mechanics
• /
• v.43 no.6
• /
• pp.835-845
• /
• 2012

This paper focuses on the stochastic response analysis of industrial masonry chimneys to surface blast-induced random ground motions by using a three dimensional finite element model. Underground blasts induce ground shocks on nearby structures. Depending on the distance between the explosion centre and the structure, masonry structures will be subjected to ground motions due to the surface explosions. Blast-induced random ground motions can be defined in terms of the power spectral density function and applied to each support point of the 3D finite element model of the industrial masonry system. In this paper, mainly a parametric study is conducted to estimate the effect of the blast-induced ground motions on the stochastic response of a chimney type masonry structure. With this purpose, different values of charge weight and distance from the charge centre are considered for the analyses of the chimney. The results of the study underline the remarkable effect of the surface blast-induced ground motions on the stochastic behaviour of industrial masonry type chimneys.

• Computers and Concrete
• /
• v.18 no.5
• /
• pp.1019-1039
• /
• 2016

In this paper, a parallel algorithm of nonlinear dynamic analysis of three-dimensional (3D) reinforced concrete (RC) frame structures based on the platform of graphics processing unit (GPU) is proposed. Time integration is performed using Newmark method for nonlinear implicit dynamic analysis and parallelization strategies are presented. Correspondingly, a parallel Preconditioned Conjugate Gradients (PCG) solver on GPU is introduced for repeating solution of the equilibrium equations for each time step. The RC frames were simulated using fiber beam model to capture nonlinear behaviors of concrete and reinforcing bars. The parallel finite element program is developed utilizing Compute Unified Device Architecture (CUDA). The accuracy of the GPU-based parallel program including single precision and double precision was verified in comparison with ABAQUS. The numerical results demonstrated that the proposed algorithm can take full advantage of the parallel architecture of the GPU, and achieve the goal of speeding up the computation compared with CPU.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.121-130
• /
• 2001

This paper addresses a method for evaluating perceived velocities of the graphic module in a driving simulator. The major two graphic factors associated with perceived velocities are analyzed: they are the lateral distance between a virtual driver and an array of environmental objects and the textural density of these objects. A graphical representation of a vehicle and its surrounding environment are constructed by employing a three-dimensional tool, Pro/ENGINEER and a virtual environment, dVISE. Using the developed virtual driving environment, experiments have been carried out to formulate the relationship between velocity perception and each factor. Based on the experimental results, nonlinear regression equations are derived to show how the perceived velocities are dependent upon distance/density.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1353-1368
• /
• 2015

A finite element model is presented for the analysis of composite steel-concrete beams based on a refined high-order theory. The employed theory satisfies all the kinematic and stress continuity conditions at the layer interfaces and considers effects of the transverse normal stress and transverse flexibility. The global displacement components, described by polynomial or combinations of polynomial and exponential expressions, are superposed on local ones chosen based on the layerwise or discrete-layer concepts. The present finite model does not need the incorporating any shear correction factor. Moreover, in the present $C^1$-continuous finite element model, the number of unknowns is independent of the number of layers. The proposed finite element model is validated by comparing the present results with those obtained from the three-dimensional (3D) finite element analysis. In addition to correctly predicting the distribution of all stress components of the composite steel-concrete beams, the proposed finite element model is computationally economic.

• Membrane and Water Treatment
• /
• v.7 no.2
• /
• pp.87-100
• /
• 2016

A numerical simulation of membrane evaporation process was carried out in this work. The aim of simulation is to describe transport of water through porous membranes applicable to the concentration of aqueous solutions. A three-dimensional mathematical model was developed which considers transport phenomena including mass, heat, and momentum transfer in membrane evaporation process. The equations of model were then solved numerically using finite element method. The results of simulation in terms of evaporation flux were compared with experimental data, and confirmed the accuracy of model. Moreover, profile of pressure, concentration, and heat flux were obtained and analyzed. The results revealed that developed 3D model is capable of predicting performance of membrane evaporators in concentration of aqueous solutions.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.149-152
• /
• 2000

By using a three-dimensional finite element program HydroFORM-3D based on a rigid-plastic model, the hydroforming process for automobile subfrmae is analyzed in this study. The goal of this study is to accomplish preform design and determine the level of internal pressure for producing final hydroformed subframe component. Prior to hydroforming, the initial tube blank must be bent to the approximate centerline of the final part to enable the tube to be placed in the die cavity, After then, a preforming operation like stamping is carried out to the prebent tube. Finally, hydroforming process is performed to the preformed tube to get the final production. And through ductile fracture theory, the failure, bursting, is predicted during hydroforming process for tube blank with different diameter.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.1
• /
• pp.39-49
• /
• 1995

Stereo vision is useful to obtain three dimensional depth information from two images taken from different view points. In this paper, we reduce searching area for correspondence by using the intra-scanline constraint, and utilize the inter-scanline constraint and the property of disparity continuity among the neighboring pixels for relaxation. Nodes with 3-D stucture are located on the axes of two views, and have matching possibility of correspondent pixels of two images. A matching is accepted if a node at the intersection of the disparity axes has the greatest matching possibility. Otherwise, the matching possibility of the node is updated by relaxation with the cooperation of neighboring nodes. Further relaxation with competition of two views is applied to a matching possibility of randomly selected node. The consensus of two views increases the confidence of matching, and removes a blurring phenomenon on the discontinuity of object. This approach has been tested with various types of image such as random dot stereogram and aerial image, and the experimental results show good matching performance.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.901-902
• /
• 2008

In this paper, we have proposed a new method to estimate three dimensional (3D) shape of an object. The new method is simple and fast, based on Pixel-Intensities in the images sequence as a model for depth measurement. The images are taken by varying the focus value in small steps, and each pixel in the image is taken as a single measurement. The proposed algorithm is more fast and accurate than previous methods.