• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.415-420
• /
• 1998

In this paper, 2D SUB-3D STM approach for analysis and design of 3D structural concrete is presented. In the approach several 2D sub strut-tie models which are representations of compressive and tensile stress flows of each projected plane of 3D structural concrete are utilized in the sketch of a 3D strut-tie model, in the evaluation of effective strengths of compressive concrete struts, and in the verification of geometric compatibility and bearing capacity of critical nodal zones of 3D strut-tie model. To prove the validity and rationality of the suggested approach, the behavior and strength of a prestressed box girder diaphragm tested to failure are evaluated.

• International Journal of CAD/CAM
• /
• v.4 no.1
• /
• pp.19-32
• /
• 2004

This paper presents a new approach to create 3D visualization from discrete simulation results. This approach connects discrete event simulation directly to 3D animation with its novel methods that analyze and convert discrete simulation results into animation events to trigger 3D animation. In addition, it constructs a 3D animation framework for the visualization of discrete simulation results. This framework supports the reuse of both the existing 3D animation objects and behavior components, and allows the rapid development of new 3D animation objects by users with no special knowledge in computer graphics. This approach has been implemented with the software component technology. As an application in virtual manufacturing, visualizations of an electronics assembly factory are also provided in the paper to demonstrate the performance of this new approach.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.2
• /
• pp.113-129
• /
• 2000

This study evaluates the behavior and strength of an anchorage zone of the prestressed concrete box girder bridge on the Kyungboo highway railroad using the 2D SUB-3D STM approach and a linear elastic finite element analysis. The 2D SUB-3D STM approach utilizes several two-dimensional sub strut-tie models that represent the compressive and tensile stress flows of each projected plane of the three-dimensional structural concrete in the selection of a three dimensional strut-tie model, evaluation of the effective strengths of the concrete struts, and verification of the geometric compatibility condition and bearing capacity of the critical nodal zones in the selected three-dimensional strut-tie model. The finite element analysis uses an 8-node brick element and the longitudinal prestressing force is considered as the equivalent nodal force. Analysis results show that the 2D SUB-3D STM approach and linear elastic finite element method can be effectively applied to the analysis and design of three-dimensional structural concrete including a prestressed concrete box girder anchorage zone.

• Fashion & Textile Research Journal
• /
• v.15 no.1
• /
• pp.65-72
• /
• 2013

This study utilizes a S-O-R model to investigate the effects of apparel product presentations using a 3D avatar model in Internet fashion malls for pleasure(emotional state) and approach behavior. We chose a 3D avatar model to present a fashion product in this study. The model walked for about one minute on stage; subsequently, respondents completed a questionnaire after they viewed it. The questionnaire consists of telepresence, pleasure and approach behavior. Respondents are limited to females 20s and 30s years old who have purchased fashion products in an Internet mall and are highly interested in fashion products. A total of 226 samples were used for the final analysis. Cronbach's alpha, correlation analysis, confirmatory factor analysis, and structural equation modeling were utilized in this study. The results are as follows. First, telepresence has a significant influence on pleasure; subsequently, pleasure influenced consumer approach behavior. Second, telepresence positively influenced the approach behavior (directly and indirectly). This verified the effectiveness of a 3D avatar model using S-O-R. A 3D avatar model can be a strategic alternative in the fiercely competitive Internet shopping sector.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.4
• /
• pp.337-338
• /
• 2021

During recent decades, the three-dimensional (3D) approach in orthognathic surgery were introduced and adopted in clinical practice, providing practical advantages to orthognathic surgeons. Even when the 3D approach is assessed based on the current state of technological development, it has advantages in orthognathic surgery and has become an essential method. It is not sure what to come next in the development of the 3D approaches, It is clear that the 3D approach represents a milestone in the development of orthognathic surgery.

• International Journal of Quality Innovation
• /
• v.3 no.2
• /
• pp.29-37
• /
• 2002

This paper presents a framework for processing a structured approach of R&D investment. It presents nine steps to operate R&D investment from analysis of environment situation to review and feedback its activity. Also fundamental questions fur effective R&D management in business are discussed and after that critical eight success factors for R&D investment are discussed.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2005.09a
• /
• pp.23-34
• /
• 2005

Electronic interconnection and packaging is mainly performed in a planar, 2D design style. Further miniaturization and performance enhancement of electronic systems will more and more require the use of 3D interconnection schemes. Key technologies for realizing true 3D interconnect schemes are the realization of vertical connections, either through the Si-die or through the multilayer interconnect with embedded die. Different applications require different complexities of 3D-interconnectivity. Therefore, different technologies may be used. These can be categorized as a more traditional packaging approach, a wafer-level-packaging, WLP ('above' passivation), approach and a foundry level ('below' passivation) approach. We define these technologies as respectively 3D-SIP, 3D-WLP and 3D-SIC. In this paper, these technologies are discussed in more detail.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.3
• /
• pp.35-53
• /
• 1994

Orthographic views ore traditionally used for engineering drawings. This paper presents a methodology for 3D parametric design using orthographic views. The parametric design technique, which is used to design 2D orthographic views, is based on production rules. In the production rule-base, several view interrelation rules and over 50 geometric rules are included. An efficient algorithm is also developed to expedite the reasoning process. For 3D object construction from orthographic views, the approach known as bottom-up geometrical approach is used. The approach consists of 4 steps : 1) generation of wire-frame, 2) construction of face from wire frame, 3) formation of 3D subobjects from faces, and 4) construction of final 3D objects. Curvilinear solids as well as planar solids can be constructed. A method of converting existing 2D CAD data to parametric 3D CAD data is also presented.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.3
• /
• pp.28-38
• /
• 1998

In our paper is reported a new 3D(dimensional) trajectory split approach with greatly improved efficiency for the Monte Carlo simulation of the 3D profiles of implanted ionand point defect concentrations in single-crystal silicon. This approach has been successfully implemented in our TRICSI Monte Carlo code. Combined with the previously developed model for damage accumalation in our TRICSI code, this model allows phasically based dynamic simulation of 3D profiles over an subsequent process simulation such as diffusion modeling and simulation. A typical time saving of over 10 timeshas been achieved for 3D simulation. Our method ensures much better region aground the implanted area. For 1-D simulation, the optimized condition for trajectory split has set to 3,000 pseudoparticles with 2 split branches.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.11
• /
• pp.1192-1195
• /
• 1997

A divergent approach to 2-(hydroxymethyl)pyrrolidine-3,4-diols has been studied with 1,4-dideoxy-1,4-imino-D-arabinitol (D-AB1), a potent glycosidase inhibitor. D-AB1 was efficiently synthesized from 2,3-epoxyalcohol 6a in overall 11% yield.