• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.413-416
• /
• 2021

본 논문에서는 서비스용 다관절 로봇팔의 주요기능인 다양한 컵의 검출과 조작, 이동등을 지능적으로 구현하기 위해 로봇 오픈소스 운영체제인 ROS(Robot Operation System)을 기반으로 관련 프로 그램을 개발하고 기능을 구현하였다. 연구의 주요 목표인 다양한 종류의 컵, 병과 같은 물체를 실수없이 집어서 옮기기 위한 처리과정으로 관심물체인식, 3D좌표생성, 결과데이터의 역 기구학 해석등을 수행하였으며, 이를 통해 각 기구부의 축들이 물체에 정확히 도달하고 동작의 오류를 최소화하기 위해 ROS기반의 6축 서비스 로봇팔을 활용한 경로 생성과정과 물체의 검출 성능 과정 및 실험등을 제시하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.305-311
• /
• 2012

In this paper, we propose a gait generation method for quadruped robots using the xz-axis sway of the quadruped robot, which minimizes the shake of the quadruped robot and maximizes the stability margin. In the proposed method, the gait is generated based on wave gaits and the stability analysis uses the body tilt information of the quadruped robot according to the leg's height of leg. In addition, to reduce the impact on the body caused by the z-axis sway while walking, the proposed method generates the smooth walking movement trajectory with less impact by using Fourier series. Finally, to verify the applicability and effectiveness of the proposed method, we carry out the computer simulations and the real walking experiments with the implemented quadruped robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.692-695
• /
• 1997

Nonlinear robust attitude controller for 3-axis stabilized spacecraft is designed. Robust stability analysis for nonlinear spacecraft system with disturbance is conducted. External disturbances and parametric uncertainties decrease Spacecraft's attitude pointing accuracy. Sliding Mode Control(SMC) provides stability of system in the face of these disturbances and uncertainties. The concept of quadratic boundedness and quadratic stability are applied to the robust analysis for the nonlinear spacecraft system subject to bounded disturbance torques. Numerical simulation is conducted to compare the analysis result and actual nonlinear simulation. The simulation show that analysis result is valid.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.3
• /
• pp.300-305
• /
• 2009

This paper describes the intelligent robot's hand with three-axis finger force sensors for an intelligent robot. In order to grasp an unknown object safely, it should measure the mass of the object, and determine the grasping force using the mass, then control the robot's fingers with the grasping force. In this paper, the intelligent robot's hand for an intelligent robot was developed. First, the three-axis finger force sensors were designed and manufactured, second, the intelligent robot's hand with three-axis finger force sensors were designed and fabricated, third, the high-speed control system was designed and manufactured using DSP( digital signal processor), finally, the characteristic test to grasp an unknown object safely was carried out. It was confirmed that the developed intelligent robot's hand could grasp an unknown object safely.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1463-1471
• /
• 2012

In this study, a 3-axis camera system design is proposed for application to an existing 2-axis surveillance robot. A camera-image-based target-tracking algorithm for this robot has also been proposed. The algorithm has been validated using a virtual simulation. In the algorithm, the heading direction vector of the camera system in the mobile surveillance robot is obtained by the position error between the center of the view finder and the center of the object in the camera image. By using the heading direction vector of the camera system, the desired pan and tilt angles for target-tracking and the desired roll angle for the stabilization of the camera image are obtained through inverse kinematics. The algorithm has been validated using a virtual simulation model based on MATLAB and ADAMS by checking the corresponding movement of the robot to the target motion and the virtual image error of the view finder.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.341-345
• /
• 1986

In the course of robot control system building, there are problems in the position control loop of 3rd axis of robot manipulator. The problems are summerized as two: one is uncontrollability of position and the other is oscillation. And these problems are analyzed through experiment, and it is known that the cause of problems in torsional vibration of 3rd axis. So that these two problems are solved by noise immunity enhancement and lowering of PI controller gain.

• ICROS
• /
• v.3 no.3
• /
• pp.36-48
• /
• 1997

본 원고에서는 극 좌표계를 기준으로 하여 추정기를 구성함으로써 속도 검출기가 없는 유도전동기의 회전자 자속 및 회전 속도를 정확히 추정해 내고, 다시 이 정보를 이용하여 유도전동기를 고성능으로 제어할 수 있는 드라이브 시스템의 구현 과정과 이를 이용한 간단한 실험 결과에 대하여 소개하였다. 본 원고에서 제시한 몇가지의 실험 결과들은 소프트웨어의 알고리즘에 의하여 전동기의 회전축에 부착된 속도 검출기는 충분히 대치될 수 있음을 말해주는 것이므로, 속도 검출기가 가격과 내구성 등에서 실제적으로 산업 현장에 적용하기에 많은 문제점을 안고 있다는 점을 감안할 때 그 유용성을 입증하는 것이다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.327-331
• /
• 2006

본 논문은 엔터테인먼트 4족 보행로봇에 관한 것으로 24개의 자유도와 비접촉온도 3축 모션, 터치, 음성인식, CCD 카메라와 IR 센서를 내포하고 있다. 4족 보행로봇을 비평탄지형에서 안정되게 보행시키기 위한 알고리즘과 원격지에서 로봇을 제어하기 위한 알고리즘을 제안한다. 제안한 보행안정화 알고리즘은 다양한 센서들을 이용하여 불확실한 환경 하에서 안정된 보행이 되도록 하였으며, PC 상의 GUI와 음성인식 시스템을 이용하여 로봇을 무선으로 원격제어하게 하였다. 개발한 4족 보행로봇의 실험을 통하여 제안한 알고리즘을 검증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.463-466
• /
• 2017

The purpose of this paper is to develop a module capable of all-directional driving different from conventional wheeled robots, and to solve the problems of the conventional mobile robot with side driving performance degradation, It is possible to overcome the disadvantages such as an increase in the time required for the unnecessary driving. The all - direction spherical wheel drive module for driving a ball - balancing robot is required to develop a power transfer mechanism and a driving algorithm for driving the robot in all directions using three rotor casters. 3DoF (Axis) A driver with built-in forward motion algorithm is embedded in the module and a driving motor module with 3DoF (axis) for driving direction and speed is installed. The movement mechanism depends on the sum of the rotation vectors of the respective driving wheels. It is possible to create various movement directions depending on the rotation and the vector sum of two or three drive wheels. It is possible to move in different directions according to the rotation vector field of each driving wheel. When a more innovative all-round spherical wheel drive module for forward movement is developed, it can be used in the driving part of the mobile robot to improve the performance of the robot more technically, and through the forward-direction robot platform with the drive module Conventional wheeled robots can overcome the disadvantage that the continuous straightening performance is lowered due to resistance to various environments. Therefore, it is necessary to use a full-direction driving function as well as a cleaning robot and a mobile robot applicable in the Americas and Europe It will be an essential technology for guide robots, boarding robots, mobile means, etc., and will contribute to the expansion of the intelligent service robot market and future automobile market.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.157-163
• /
• 2011

In this paper, configuration control for the Horizontal Maintenance and driving of the mobile inverted pendulum robot has been studied using ARS(Attitude Refrence System). The inverted pendulum technique is getting attention and there have been many researches on the seg-way since the US. Using its 2 freedom, a mobile inverted pendulum robot can move in various modes and Our robot performs goal reaching ARS. Mobile inverted pendulum robot fall down to the forward or reverse direction to converge to the stable point. Kalman Filter is normally used for the algorithm and numerous research is progressing at the moment. To calculate the attitude in ARS using 2 axis gyro(roll, pitch) and 3 axis accelerometers (x, y, z). In this paper we present a two wheel robot system for an autonomous mobile robot. This paper realized the robot control method which is much simpler but able to get desired performance by using the IMU and PID control.