• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.125-125
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.10a
• /
• pp.95.1-95.1
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.10a
• /
• pp.95.2-95.2
• /
• 2003

• Journal of Energy Engineering
• /
• v.1 no.1
• /
• pp.76-86
• /
• 1992

A three-dimensional model has been developed for pulverized coal combusters and gasifiers. Coal devolatilization, heterogeneous char oxidation, gas particle interchange, radiation, gas phase oxidation, primary and secondary stream mixing, and heat losses are considered. A finite difference method was used to solve the ordinary non-linear differential equations. The effects of primary and secondary stream flow ratio and coal particle size are investigated.

• Journal of computational fluids engineering
• /
• v.4 no.1
• /
• pp.41-52
• /
• 1999

이 논문에서는, QUICK해법의 불안정성을 개량하므로써, 수치계산에 있어서 수렴이 빠르고, 수치적으로 안정한 계산을 할 수 있는 새로운 MQUICK 상류해법을 제안하고, 이를 비압축성 층류유동의 계산에 적용하였다. 또한, 해법의 정확성, 안정성, 수렴속도에 대한 검토를 통하여 본 MQUICK 상류해법의 유효성과 타당성이 평가되었다. 이 해법에서는 인공산일의 가감을 조절하기 위하여 가중계수 α를 써서 정식화 하였고, 위의 검토를 통하여 α의 최적값을 조사하였다. 이 해법을 SMAC 음해법에 적용하여 2 차원 공동유동, 3 차원 덕트유동과 같은 몇몇 표준문제를 계산하고, 계산된 결과를 실험값 또는, 3 차 정확도의 상류해법 및 QUICK해법에 의한 결과 들과 비교 하므로써, 본 MQUICK 상류해법이 위의 다른 해법에 비하여 안정하고, 유효성이 높은 해법임을 확인 하였다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.2
• /
• pp.61-70
• /
• 2013

Hydrodynamic aspects on three-dimensional effects were investigated in this study for simple and convenient conversion of tidal stream energy using a Vertical-Axis Turbine (VAT). Numerical approach was made to reveal the differences of flow physics between 2-D estimation and rigorous 3-D simulation. It was shown that the 3-D effects were dominant mainly due to the variation of tip vortices around the tip region of rotor blade, causing the loss of lift for steadily translating hydrofoil and the reduction of torque for rotating turbine blade. The 3-D effect was found to be rather prominent for the typical VATs considered in this paper. Simple and yet efficient 2-D approach with the correction of its three-dimensionality was also proposed for practical design and analysis of VAT.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.469-473
• /
• 2001

It is very important that piping system shall meet the optimum design requirement as predicted in designing system. If the piping system proved not to meet the requirement in commission it shall be redesigned and corrected till the required capacity is satisfied. which costs much expense. The objective of this study is to understand steady 3-dimensional flow phenomena in a process piping system numerically. 3-dimensional numerical simulations with standard $k-{\epsilon}$ model were carried out by using ALGOR code for three cases of Reynolds number. 2500, 3500 and 4500, based on inlet pipe diameter and three cases of inflow air temperature, $20^{\circ}C,\;50^{\circ}C$ and $100^{\circ}C$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.133-133
• /
• 2011

본 연구에서는 3차원 수치모형을 이용하여 댐붕괴파의 전파특성에 대한 모의를 수행하였다. 적용된 수치모형은 ANSYS CFX(v. 13) 모형으로 진보된 유동해석기법과 편리한 workbench 환경이 결합된 강력한 GUI 환경을 통해 작업하기 편리하며, 빠르고 정확한 해석결과를 제공하는 전산유체역학 도구로 국내외에서 이용되고 있다. 본 연구에서는 기존의 댐 붕괴파 특성 분석과 관련된 수리모형실험(Soares Frazao 등, 2004: Soares Frazao와 Zech, 2008) 자료를 이용하여 모의를 수행하였으며, 지점별 실측자료와 2차원 유한체적모형(정 등, 2009, 2010)에 의한 결과와의 비교를 통해 적용성 검증을 수행하였다. 또한 3차원 모형 적용 시 중요한 매개변수로 고려되는 수로바닥 및 벽면에서의 조도높이 따른 댐 붕괴파의 전파양상을 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3287-3296
• /
• 1994

For the numerical computation of three-dimensional compressible flow field within a blade row in a centrifugal compressor, a quasi 3-dimensional solver which combines a reversible B-B flow and an irreversible H-S flow using finite element methods was developed. In a reversible B-B flow, the governing coordinates are modified in order to be applied to any type of turbomachinery, and two kinds of stream functions are introduced in order to make the Kutta condition exactly satisfied. In an irreversible H-S flow, the changes of entropy in the irreversible governing equations are determined not by empirical source but by the theoretical treatment of dissipation forces. The dissipation forces are obtained from the distribution of shear stresses in the flow passage which are given from the wall shear stresses using the exponential functions. A more accurate quasi-3-dimensional solver is established where the effect of body forces is involved in the non-axisymmetric H-S flow. Some numerical results obtained from authors' previous studies for axial flow machines assure that the present method is able to predict well as long as the flow is subsonic and not under strong viscous effect.

• Journal of Aerospace System Engineering
• /
• v.14 no.3
• /
• pp.17-23
• /
• 2020

In this paper, the efficient periodic unsteady flow analysis is developed by using a Chebyshev collocation operator applied to the time differential term of the governing equations. The partial implicit time integration method was also applied in the governing equation for a fluid, which means flux terms were implicitly processed for a time integration and the time derivative terms were applied explicitly in the form of the source term by applying the Chebyshev collocation operator. To verify this method, we applied the 1D unsteady Burgers equation and the 2D oscillating airfoil. The results were compared with the existing unsteady flow frequency analysis technique, the Harmonic Balance Method, and the experimental data. The Chebyshev collocation operator can manage time derivatives for periodic and non-periodic problems, so it can be applied to non-periodic problems later.