• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.181-197
• /
• 2003

The Purpose of this study was to examine the kinematic analysis of the upper-limb motion of wheelchair basketball free throw shooting. Three-dimensional kinematic data were obtained from 8 male wheelchair basketball players performing a successful free throw. Players were divided into three groups, according to their IWBF classification(Group 1: 1 point players, Group 2: 2-2.5point players and Group 3:3.5-4 point players) Wheelchair basketball free throw motions were taken by video camera. The three-dimensional coordinates was processed by DLT. Players from Group 1 and 2 tended to release the ball from a lower height, with greater velocity and release angle. Players from Group 1 showed greater shoulder horizontal adduction and horizontal abduction angle, wrist ulnar flexion and radial flexion angle, and trunk angle. but players from Group 2 appeared lower shoulder abduction. Upper limb angular velocity showed most greatly in hands from Group 1, upperarm from Group 2, and forearm from Group 3.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1993.07a
• /
• pp.166-174
• /
• 1993

본 연구에서는 자유수면과 성층효과를 고려한 3차원 연안해수유동 수치모형을 개발하였다. 수치모형은 수심방향에 대해서 정규화된 좌표(c-coordinate)를 사용하며, 시간적분방법으로는 반음해법(semi-implicit)을 사용하여 계산시간의 효율성을 도모하였으며, 모드분리개념을 도입하여 내역항(Internal mode)에 대해서는 양해법을 사용하였으며, 외역항(External mode)은 수평방향 운동방정식과 연속방정식의 차분식으로부터 얻은 Poisson형태의 타도형 차분방정식을 Point-SOR법에 의하여 해석하였다. (중략)

• Composites Research
• /
• v.13 no.3
• /
• pp.9-20
• /
• 2000

Free vibration characteristics of a cantilevered laminated composite beam with multiple non-propagating transverse open cracks are investigated. In the present analysis a special ply-angle distribution referred to as asymmetric stiffness configuration inducing the elastic coupling between chord-wise bending and extension is considered. The multiple open cracks are modelled as equivalent rotational springs whose spring constants are calculated based on the fracture mechanics of composite material structures. Governing equations of a composite beam with open cracks are derived via Hamilton's Principle and Timoshenko beam theory encompassing transverse shear and rotary inertia effect is adopted. The effects of various parameters such as the ply angle, fiber volume fraction, crack numbers, crack positions and crack depthes on the free vibration characteristics of the beam with multiple cracks are highlighted. The numerical results show that the existence of the multiple cracks in an anisotropic composite beam affects the free vibration characteristics in a more complex fashion compared with the beam with a single crack.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.191-204
• /
• 1998

The general formulation for free vibration and stability analysis of unsymmetric thin-wared space frames is presented in case where the shear deformation effects are neglected. The kinetic and total potential energies are derived by applying the extended virtual work principle, introducing displacement parameters defined at the arbitrarily chosen axis and including warping deformation and second order terms of finite semitangential rotations. In formulating the finite element procedure, cubic Hermitian polynomials are utilized as shape functions of the two node space frame element. Mass, elastic stiffness, and geometric stiffness matrices for the unsymmetric thin-walled section are evaluated, and load-correction stiffness matrices for off-axis distributed loadings are considered. In order to illustrate the accuracy and practical usefulness of this formulation, finite element solutions for the free vibration and stability problems of thin-walled beam-columns and space frames are presented and compared with available solutions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.4
• /
• pp.352-359
• /
• 2012

An experiment was carried out to figure out the turbulence flow characteristics in the wake of the transom stern's 2-dimensional section by 2-frame grey level cross correlation PIV method at Re= $3.5{\times}10^3$, Re= $7.0{\times}10^3$. The angles of transom stern are $45^{\circ}$(Model "A"), $90^{\circ}$(Model "B") and $135^{\circ}$(Model "C") respectively. The depth of wetted surface is 40mm from free surface. Strong turbulence intensity appears at the interaction between the flow separation of the bottom of a model and the free surface. This study provides statistic flow information such as turbulence intensity, Reynolds stress and turbulence kinetic energy. Model C type (Raked transom) has low Reynolds stress and turbulence kinetic energy.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.31-34
• /
• 2010

본 논문에서는 교량의 자유진동 모드의 중첩원리를 이용하여 KTX-교량의 동적상호작용 해석법을 제시한다. 이를 위하여 모드중첩법에 기초한 3차원 교량-차량의 에너지 식으로부터 에너지원리를 적용하여 교량과 차량의 상호작용을 고려할 수 있는 운동방정식을 유도한다. 이때 운동방정식의 해는 Newmark-${\beta}$ 방법을 사용한다. 그리고 궤도의 불규칙성은 FRA의 6등급 분류규정을 고려하여 각 등급별로 고속철도의 열차속도에 따르는 응답을 분석한다. 실제 고속철도에 사용되는 PSC 박스형 교량을 상용프로그램(MIDAS)를 이용하여 모델링하고 그로부터 각 모드별 형상을 얻어내어 본 논문에서 개발한 열차-교량 상호작용 프로그램에 입력하여 상호작용 해석을 수행한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.1 s.94
• /
• pp.20-28
• /
• 2005

This paper addresses uncertainty issues encountered recently in measuring head vibration using the conventional 6-axis or 9-axis bite-bar model. Those conventional bite-bar models are shown to present insufficient information to evaluate a generalized motion of head vibration. In order to overcome such limit, a new theoretical measurement model that consists of four 3-axis linear accelerometers is suggested. It is shown to enable the measurement of three angular acceleration components and six second-order angular velocity-dependent terms. Those nine angular motion-related ones, in addition to the three linear acceleration terms at the origin, are found to make it possible to evaluate the generalized head vibration for a given position. To examine the feasibility of the proposed method, a newly designed 12-axis bite-bar was developed. Detailed experimental results obtained from the developed 12-axis bite-bar are demonstrated in this paper. They illustrate that the popular 6-axis bite-bar model yield about $4.0\%$ relative measurement uncertainty for the pitch component of head vibration, $14\%$ and $10\%$ relative measurement uncertainty for the roll and yaw components of head vibration, respectively. Furthermore, this paper proposes other uncertainty factors to be considered in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.5-13
• /
• 1995

This paper shows newly developed equations of cylindrical shell motion, which solutions are obtained as a set of linear equation. Each linear equation is derived along each axis of cylindrical coordinates. The admittance and the free wavenumber are obtained under assumption of point excition on a cylindrical shell. Their results are shown in figures. In this results, this paper shows a possibility that a vibration and a noise generated in a cylindrical shell can be formulated as a mathematical model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1067-1070
• /
• 1995

In this paper, we have treated the modeling and development of three degree of freedom parallel manipulator for micromotion based on the Stewart platform type parallel structure. the kinematic modeling was derived from the relation between base coordinate and platform anr the dynamic modeling was from the method of Kinematic Influence Coefficients(KIC) and transferring of the generalized coordinates. Using this method, we presented the method to choose the actuator and joint by investigating the actuating forces needed when the manipulator moves along the given trajectory. In the end, the prototype manipulator was developmented and evaluated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.270-275
• /
• 1995

본 논문에서는 3자유도를 갖는 2차원 강체날개의 플러터 속도를 향상시키는 축차 제어기를 설계하는 기법을 연구하였다. 먼저 2차원 강체날개의 운동방정식을 유도하고 플러터 해석을 수행하였다. 다음 수동계의 플러터 속도를 향상시키는 능동제어기를 설계한 후 제어기의 차수를 축차하는 기법을 적용하여 저차의 능동제어기를 구성하였다. 제어기 축차기법으로는 BACR을 사용하였으며 전차 제어기의 상태변수를 약 80%정도 줄일 수 있다. 축차된 제어기를 사용한 능동시스템과 전차 제어기를 사용한 능동시스템의 제어효과의 차이는 무시 할 수 있을 정도로 매우 작다. 따라서, BACR을 사용하여 얻은 축차된 제어기를 사용하면 상당한 계산량 감소효과와 실시간 단축효과를 얻을 수 있음을 확인하였다. 또한 동일한 돌풍입력에 대한 각각의 능동 시스템의 시간응답도 매우 양호한 결과를 얻을 수 있었으며, 전차 제어기를 사용한 능동시스템의 돌풍응답과 축차된 제어기를 사용한 능동시스템의 돌풍 응답 사이의 차이도 매우 작게 나타났다. 그러므로, 항공기 날개의 능동 플러터억제에는 BACR을 이용하여 설계한 축차된 제어기가 플러터 능동제어에 매우 유용하다고 할 수 있다. 그러나 BACR을 사용하기 위해서는 요구되는 정확도와 계산량에 대한 상호 절충과정이 반드시 필요하다.