• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.311-320
• /
• 2008

In this paper, a 2.4 GHz low-voltage CMOS double-balanced down-conversion mixer using neutralization technique has been proposed and verified by circuit simulations and measurements. The grounded source structure was used for low-voltage operation. The neutralization technique was used to improve a conversion gain. The proposed mixer is fabricated in $0.25{\mu}m$ CMOS process for a 2.4 GHz wireless receiver. The mixer consumes 1.94 mW and gives conversion gain of 5.66 dB, input IP3 of 0.7 dBm and P1dB of -11.2 dBm at 1.5 V power supply. Measured results for the designed mixer show improved conversion gain of 2.86 dB over conventional mixer of grounded source structure.

• Journal of Korea Multimedia Society
• /
• v.25 no.11
• /
• pp.1634-1642
• /
• 2022

Numerous studies have attempted to present converting 2D drawings to 3D. However, converting 3D shapes to exactly how a person thinks is challenging because 2D drawings include numerous variables and possibilities. This study focuses on visualizing 2D to 3D in a commonly used 3D animation software required in animation education or the 3D industry. We implemented our SketchTo3D tool to add the editing and automatic texture assigning method from the imported 2D image into the 3D software that previously had to be done manually. As a result, the SketchTo3D tool saves time to immediately visualize the composition, shape, and volume to express the 3D character, providing an opportunity to break down the barrier between 2D and 3D.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.521-528
• /
• 2014

In this paper, we propose the method of converting 2D image to 3D image using linear curves in HTML5. We use only one image without any other information about depth map for creating 3D images. So we filter the original image to extract RGB colors for left and right eyes. After selecting the ready-made control point of linear curves to set up depth values, users can set up the depth values and modify them. Based on the depth values that the end users select, we reflect them. Anaglyph 3D is automatically made with the whole and partial depth information. As all of this work has been designed and implemented in Web environment using HTML5, it is very easy and convenient and end users can create any 3D image that they want to make.

• Journal of electromagnetic engineering and science
• /
• v.8 no.3
• /
• pp.91-95
• /
• 2008

This paper presents a direct-conversion I/Q up-mixer block, which supports $3{\sim}5$ GHz ultra-wideband(UWB) applications. It consists of a VI converter, a double-balanced mixer, a RF amplifier, and a differential-to-single signal converter. To achieve wideband characteristics over $3{\sim}5$ GHz frequency range, the double-balanced mixer adopts a shunt-peaking load. The proposed RF amplifier can suppress unwanted common-mode input signals with high linearity. The proposed direct-conversion I/Q up-mixer block is implemented using $0.18-{\mu}m$ CMOS technology. The measured results for three channels show a power gain of $-2{\sim}-9$ dB with a gain flatness of 1dB, a maximum output power level of $-7{\sim}-14.5$ dBm, and a output return loss of more than - 8.8 dB. The current consumption of the fabricated chip is 25.2 mA from a 1.8 V power supply.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.33-43
• /
• 2011

Recently, 3D displays are supplied in the 3D markets so that the demand for 3D stereoscopic contents increases. In general, a simple method is to use a stereoscopic camera. As well, the production of 3D from 2D materials is regarded as an important technology. Such conversion works have gained much interest in the field of 3D converting. However, the stereoscopic image generation from a single 2D image is limited to simple 2D to 3D conversion so that the better realistic perception is difficult to deliver to the users. This paper presents a new stereoscopic content production method where foreground objects undergo alive action events. Further stereoscopic animation is viewed on 3D displays. Given a 2D image, the production is composed of background image generation, foreground object extraction, object/background depth maps and stereoscopic image generation The alive objects are made using the geometric transformation (e.g., translation, rotation, scaling, etc). The proposed method is performed on a Korean traditional painting, Danopungjung as well as Pixar's Up. The animated video showed that through the utilization of simple object transformations, more realistic perception can be delivered to the viewers.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.17-40
• /
• 2000

Resin cements are used for cementing indirect esthetic restorations such as resin or porcelain inlays. Because of its limitations in curing of purely light cured resin cements due to attenuation of the curing light by intervening materials, dual cured resin cements are recommended for cementing restorations. The physical properties of resin cements are greatly influenced by the extent to which a resin cures and the degree of cure is an important factor in the success of the inlay. The purpose of this study was to evaluate the influence of porcelain thickness and exposure time on the polymerization of resin cements by measuring the microhardness and the degree of conversion, to investigate the nature of the correlation between two methods mentioned above, and to determine the exposure time needed to harden resin cements through various thickness of porcelain. The degree of resin cure was evaluated by the measurements of microhardness [Vickers Hardness Number(VHN)] and degree of conversion(DC), as determined by Fourier Transform Infrared Spectroscopy(FTIR) on one light cured composite resin [Z-100(Z)] and three dual cured resin cements [Duo cement(D), 3M Resin cement(R), and Dual cement(DA)] which were cured under porcelain discs thickness of 0mm, 1mm, 2mm, 3mm with light exposure time of 40sec, 80sec, 120sec, and regression analysis was performed to determine the correlation between VHN and DC. In addition, to determine the exposure time needed to harden resin cements under various thickness of porcelain discs, the changes of the intensity of light attenuated by 1mm, 2mm, and 3mm thickness of porcelain discs were measured using the curing radiometer. The results were obtained as follows ; 1. The values of microhardness and the degree of conversion of resin cements without intervening porcelain discs were 31~109VHN and 51~63%, respectively. In the microhardness Z was the highest, followed by R, D, DA. In the degree of conversion, D and DA was significantly greater than Z and R(p<0.05). 2. The microhardness and the degree of conversion of the resin cements decreased with increasing thickness of porcelain discs, and increased with increasing exposure time, D and R showed great variation with inlay thickness and exposure time, whereas, DA showed a little variation. 3. The intensity of light through 1mm, 2mm, and 3mm porcelain inlays decreased by 0.43, 0.25, and 0.14 times compared to direct illumination, and the respective needed exposure times are 53 sec, 70 sec, and 93 sec. In D and R, 40 sec of light irradiation through 2mm porcelain disc and 80 sec of light irradiation through 3mm porcelain disc were not enough to complete curing. 4. The microhardness and the degree of conversion of the resin cements showed a positive correlationship(R=0.791~0.965) in the order of R, D, Z, DA. As the thickness of porcelain discs increased, the decreasing pattern of microhardness was different from that of the degree of conversion, however.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9C
• /
• pp.555-563
• /
• 2011

In this paper, we propose an object based 2D image to 3D conversion algorithm by using motion estimation, color labeling and non-local mean filtering methods. In the proposed algorithm, we first extract the motion vector of each object by estimating the motion between frames and then segment a given image frame with color labeling method. Then, combining the results of motion estimation and color labeling, we extract object regions and assign an exact depth value to each object to generate the right image. While generating the right image, occlusion regions occur but they are effectively recovered by using non-local mean filter. Through the experimental results, it is shown that the proposed algorithm performs much better than conventional conversion scheme by removing the eye fatigue effectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1208-1215
• /
• 2006

In this paper, we propose an algorithm that creates three-dimensional (3D) stereoscopic video from two-dimensional (2D) video encoded by H.264 instead of using the conventional stereo-camera process. Motion information of each frame can be obtained by the given motion vectors in most of videos encoded by MPEG standards. Especially, we have accurate motion vectors for H.264 streams because of the availability of a variety of block sizes. 2D/3D video conversion algorithm proposed in this paper can create the left and right images that correspond to the original image by using cut detection method, delay factors, motion types, and image types. We usually have consistent motion type na direction in a given cut because each frame in the same cut has high correlation. We show the improved performance of the proposed algorithm through experimental results.

• Journal of Broadcast Engineering
• /
• v.22 no.4
• /
• pp.429-437
• /
• 2017

2D-to-3D conversion technology has been studied over past decades and integrated to commercial 3D displays and 3DTVs. Generally, depth cues extracted from a static image is used for generating a depth map followed by DIBR (Depth Image Based Rendering) for producing a stereoscopic image. Further, motion is also an important cue for depth estimation and is estimated by block-based motion estimation, optical flow and so forth. This papers proposes a new method for motion depth generation using Motion History Image (MHI) and evaluates the feasiblity of the MHI utilization. In the experiments, the proposed method was performed on eight video clips with a variety of motion classes. From a qualitative test on motion depth maps as well as the comparison of the processing time, we validated the feasibility of the proposed method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1156-1163
• /
• 2006

This paper presents an ultra wideband(UWB) direct conversion mixer for IEEE 802.15.3a applications with simulation and measurement results. Since the direct conversion mixing causes dc-offset and even-order distortion, the proposed mixer adopts an anti-parallel diode pairs(APDPs) to solve these problems. The proposed mixer consists of an in-phase wilkinson power divider over $3.1{\sim}4.8GHz$, a wideband $45^{\circ}$ power divider over $1.5{\sim}2.4GHz$, and miniatured band pass filters(BPFs) for RF-LO isolations. The conversion loss is optimized with impedance matchings between APDPs and wideband components. The measured mixer shows the conversion loss of 13.5 dB, input third-order intercept-point($IIP_3$) of 7 dBm, and 1-dB gam compression point($P_{1dB}$) of -4 dBm. Quadrature(I/Q) outputs have the magnitude difference of about 1 dB and phase difference of ${\pm}3^{\circ}$.