• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.70-76
• /
• 2006

The microstructure evolution during a hot forging of Waspaloy was investigated using the recrystallization model and FEM simulation. In order to obtain an uniform microstructure, hot forging was carried out by two step. The change of grain size during hot forging has a deep connection with dynamic recrystallization behavior. Avrami-type constitutive equation for the dynamic recrystallization was implemented into an user subroutine of 2D FE simulator. The evolution of grain structure in the two-step forging of Waspaloy was simulated using the 2D FEM user-subroutine. The detailed variation of microstructures due to dynamic recrystallization could effectively be predicted at various locations in a forged pancake.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.301-304
• /
• 2003

Nowadays, hydration heat analysis using FEM is common in thermal crack control of concrete structure. Many kinds of general FEM programs for hydration heat analysis are used in practice. But there are some problems in this using. In this study hydration heat analysis of wall according to placement length are performed. In this results we could get two conclusions. First, general structures like wall having general geometry and construction condition have similar behavior. So it is not necessary to analysis thermal crack in every case. Second, the results of 2D analysis is possible to be applied instead of those of 3D analysis because the results of 2D analysis is similar to 3D analysis in long wall having about 15~18m or over length at 3m height.

• 터널과지하공간
• /
• 제18권6호
• /
• pp.427-435
• /
• 2008

본 연구에서는 지반등급 V중에서 막장자립이 곤란한 지반에 대해 지반고유의 지지력을 최대한 이용하기 위한 굴착공법 및 적정벤치길이에 대해 검토하고, 보조공법으로 막장볼트를 적용할 경우 타설 패턴, 타설 개수에 따라 막장 및 막장주변지반에 어떠한 영향이 발생되는지에 대해 3차원 FEM해석을 수행하였다. 보조벤치 병용전단면공법이 조기 단면폐합으로 변위를 크게 줄일 수 있음을 알 수 있었으며, 타설 패턴으로는 격자상, 교호배치형(지그재그형), 원주상순으로 변위억제효과가 있는 것으로 나타났다. 또한 타설 개수 증가에 따라 막장축방향 수평변위에 대해 억제효과가 있는 것으로 분석되었으며 보조벤치 병용 전단면공법굴착시공의 경우 막장부 $1.5m^2$에 1개의 막장볼트(격자상) 타설로 막장면 안정성을 확보할 수 있을 것으로 판단되었다.

• 한국지반공학회논문집
• /
• 제36권1호
• /
• pp.29-38
• /
• 2020

최근 환기구, 비상탈출용 수직구, 취수탑 가시설 등 지중 가물막이 또는 차수벽체로 원형 가물막이가 많이 적용되고 있다. 원형단면의 경우 벽체에 작용하는 토압이 원형가물막이 형상에 따라 아칭효과(arching effect)로 인하여 작용토압에 대한 구조체의 부재력이 감소하는 것으로 알려져 있다. 본 연구에서는 원형 가물막이에 대한 2D 유한요소해석(FEM)을 활용하여 원형띠장(ring beam) 강성을 산출 후 탄소성해석에 적용하여 부재의 단면력을 검토하였다. 더불어 3D 유한요소해석(FEM)을 통하여 원형단면의 가물막이가 다각형 형태의 가물막이보다 전단력, 휨모멘트, 그리고 발생변위가 최소값을 갖는 것으로 나타났으며, 이로써 원형단면 가물막이가 구조적으로 보다 효율적인 단면 형태임을 확인하였다

• 한국자기학회지
• /
• 제6권2호
• /
• pp.106-111
• /
• 1996

전동기와 같이 가동부를 갖는 전기기기는 힘이나 토크를 발생시키기 위하여 고안되었고, 힘이나 토크는 이들 기기의 해석과 설계에 중요한 요소이다. 지금까지 유한요소법을 이용한 전자력 계산 방법으로는 여러가지 방법들이 제시되어 왔고, 그 중 널리 사용되는 방법으로는 맥스웰 응력법과 가상변위법이 있다. 맥스웰 응력법은 맥스웰 스트레스텐서를 이용하여 표면 전자력 밀도를 구하고 이의 표면 적분으로 전자력을 구하는 방법이고, 가상변위법은 물체에 변위가 일어났을 때 발생하는 에너지의 변화량을 이용하여 전자력을 구하는 방법이다. 전류원이 포함된 문제에서는 정확도를 높이기 위하여 벡터포텐셜을 주로 이용하여 자장해석을 하여 왔으므로 본 논문에서는 유한요소법으로 3차원 자장 문제를 해석한 결과인 자기벡터포텐셜을 맥스웰 응력법과 가상변위법에 적용하여 전기기계의 각 요소의 전자력을 구하는 방법을 제시한다. 제시한 방법의 검증을 위하여 해석 모델을 솔레노이드로 하여 제시한 방법으로 구한 전자력을 3차원으로 해석한 결과와 비교하여 그 유용성을 증명한다.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.39-45
• /
• 2012

In this paper, process conditions are investigated for elimination of the grain coarsening and improved material flow during forging process by both of experiments and FEM analysis. Particular interest has been given to understand role of preform shape on the grain coarsening behavior and magnitude of the hammer forging load. As the results of FEM simulation by using DEFORM-3D, the simulated forging loads were 2,200ton in the case of a machined bar which is machined from 65mm to 60mm diameter, and below 1,900ton in the case of machined preform, respectively. The use of preform has been beneficial for reduction of the forging load and elimination of the grain coarsening. However, in the case of as received bar and the round bar, which was machined to 2.5mm thickness in surface layer, some degree of local grain coarsening behavior has been observed. The optimized preform shape could be properly designed by applying the FEM simulation.

• 한국산업융합학회 논문집
• /
• 제6권2호
• /
• pp.141-147
• /
• 2003

In this paper, the vibration characteristics of a linear stepping motor(LSM) are analyzed using the finite element method(FEM : Flux2D) and ACSL. A magnetic equivalent circuit is based on the structure of the LSM, and then the electric equivalent circuit of the LSM is derived by solving equations for the magnetic equivalent circuit. A normal force is calculated using FEM. And the vibration characteristics of the LSM are simulated by the ACSL with the voltage equations, the thrust equations, the normal force equations and the kinetic equations, and are measured by LASER experimental system.

• 소성∙가공
• /
• 제5권2호
• /
• pp.130-137
• /
• 1996

The sheet formability can be improved by the optimum drawbeads installation because draw-beads can control the flow of the metal into the die cavity when the punch enters into the die opening, In this study the drawing characteristics for step drawbead are analyzed by 2-D rigid -plastic FEM and also are measured experimentally. In addition for the validity of FEM theoretical results are compared with the experimental results. Especially the draw bead restrain-ing forces and the strain distributions of drawn specimens are obtained in both FEM and experiment. Also the effects of the drawbead dimensions drawing angles and blank holding forces on the drawing characteristics are investigated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.64-71
• /
• 2009

The stresses acting on shotcrete lining of tunnel have been measured virtually by monitoring instruments installed during construction. However, the malfunction of instrument and the lack of consistency of signal have always been controversial, but re-installation of instrument after construction of tunnel lining is practically impossible. Therefore, authors have carried out the study to develop a new technique for estimating the stress acting on shotcrete lining during and after construction. In the technique, stresses of shotcrete lining can be estimate by the measurement of deformation of free face. Therefore, the relationships between the stresses of shotcrete lining and deformation of free surface are indispensable factor. In this paper, the parametric study using 2D FEM analysis was carried out to estimate the relationships between the stress level acting on the tunnel shotcrete lining and the deformation near the free face (e.g. artificial crack in this study). The distribution of stresses of shotcrete lining is also investigated in this study as the preliminary investigation for the large-scale tunnel lining test and detailed 3D FEM analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.77-79
• /
• 2008

This paper deals with extraction of design parameters of Linear Switched Reluctance Motor (LSRM) based on force calculation using space harmonic analysis, 2D Finite Element Method (FEM) and experimental measurement. First, analytical solutions for flux density due to mover winding currents are derived in terms of magnetic vector potential and a 2D rectangular coordinate system, for the case when the mover is located at aligned and unaligned position. The analytical results are compared with those obtained from a 2D FEM Second, using Fourier series expansion, this paper predicts the force profile of LSRM analytically.