• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5447-5451
• /
• 2012

This paper presents a pattern-switchable microstrip patch antenna with loop structure. The loop structure for switchable radiation beam pattern is connected with feeding line of the microstrip patch antenna. As changing switch on/off state, the radiation beam pattern can be changed. The target frequency is 2.4 GHz and maximum radiation gain is 3.2dBi. The proposed antenna is useful for diversity antenna and smart antenna in modern wireless communication including MIMO (Multi-Input Multi-Output) and WLAN system. The sizes of the rectangular patch and the ground plane are $28mm{\times}28mm$ and $40mm{\times}50mm$, respectively. The simulation and experimental results show that the antenna radiation pattern can be changed with switch on/off configuration.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1103-1108
• /
• 2010

This paper proposes a new type of PIFA with a capacitor structure inserted into the feeding loop. It operates in GSM900, DCS, PCS, and W-CDMA frequency bands. By inserting the capacitor, it shows the effect of lowering the return loss from -2.73 dB to -6.26 dB at the parallel frequency, 2.01 GHz. The improvement of the poor radiation property near the parallel resonance frequency leads to a broadband operation in the upper band, DCS, PCS, and W-CDMA.

• The Mathematical Education
• /
• v.22 no.2
• /
• pp.5-12
• /
• 1984

Steenrod algebra $\alpha$$_{p}$(mod p) was generated for algebra on steenrod reduced powers p$^n$ and Bochstein coboudary operation $\beta$. We know the relation between them. In this thesis I have verified the theorem: (equation omitted)

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.706-713
• /
• 2010

In this paper, the small loop antenna with a parasitic loop structure for penta-band mobile phone application is proposed. This antenna is composed of a feed monopole, a radiating loop antenna with a parasitic loop structure and an additional radiating element. The antenna is printed on the very thin flexible substrate to mount on the dielectric carrier with a volume of 40 mm$\times$11 mm$\times$3 mm. The bandwidth of the proposed antenna is 402 MHz(773~1,175 MHz) for low band and 583 MHz(1,622~2,205 MHz) for high band. As a result, the proposed antenna covers the five bands of GSM850, GSM900, DCS1800, PCS1,900 and WCDMA for a 3:1 VSWR. Moreover, the radiation pattern, gain and efficiency are appropriate for mobile handset. Therefore, this antenna is suitable for small sized multi-band mobile handset applications.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.118-125
• /
• 2003

This paper presents a 5.8-㎓ oscillator that uses a novel defected ground structure(DGS), which is etched on the metallic ground plane. As the suggested defected ground structure is the structure for mounting an active device, it is the roles of a feedback loop inducing a negative resistance as well as a frequency-selective circuit. Applying the feedback loop between the drain and the gate of a FET device produces precise phase conversion in the feedback loop. The equivalent circuit parameters of the DGS are extracted by using a three-dimensional EM simulation ,md simple circuit analysis method. In order to demonstrate a new DGS oscillator, we designed the oscillator at 5.8-㎓. The experimental results show 4.17 ㏈m output power with over 22 % dc-to-RF power efficiency and - 85.8 ㏈c/Hz phase noise at 100 KHz offset from the fundamental carrier at 5.81 ㎓.

• Journal of the Korean Magnetic Resonance Society
• /
• v.20 no.2
• /
• pp.46-49
• /
• 2016

MiRNA-155, upregulated in various cancers, is one of the miRNAs that suppress apoptosis of human cancer. Thus, inhibition of the maturation of miRNA-155 could be an effective way to induce apoptotic cancer cell death. The apical stem-loop of the pre-miRNA-155 has been known as a Dicer biding site for RNA cleavage. Here, to understand the molecular basis of the tertiary interaction between pre-miRNA-155 with Dicer, we characterize the structure of the apical stem-loop of pre-miRNA-155 using NMR spectroscopy. The RNA has a stem-bulge-stem-loop-stem structure, which is consist of G-C Watson-Crick and G-U Wobble base pairs. The assignments of imino- protons were further confirmed by 2D $^{15}N-^1H$ HSQC NMR spectrum. The NMR parameters obtained in this study can be further used to investigate the tertiary interaction between pre-miRNA-155 and other biomolecules such as protein, nucleic acids, or small chemicals which might be used to control the apoptosis of cancer.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.245-248
• /
• 2005

In this paper, small sized half-wavelength circular loop antenna which attached beneath a visor of helmet is designed and fabricated at the resonant frequency of 449MHz. To reduce the size of the antenna, double series-shorted stubs are inserted inside the loop for practical use of a vacant space of loop inside. Also, It is designed for the printed type to install the helmet easily. The size of antenna on helmet is reduced to 87.75%(diameter : 70mm, height :.36mm) compare with general type antenna(diameter : 200mm height 101mm). The return loss, -10dB bandwidth and gain are -13.2dB, 17.6MHz(3.9%), and -1.78dBd. And, radiation pattern is omni-directional pattern at H-plane. Therefore, it can be seen that the half-wavelength circular loop antenna using double series-shorted stubs is proper structure for the miniaturization and the installed antenna of the helmet.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.25-31
• /
• 2014

In this paper, a modified Alford loop antenna for on-body communication system is proposed. The proposed antenna operating in the ISM band is designed with consideration of human body effect. One of advantages of the Alford loop antenna structure is low-profile, however the Alford loop antenna is not suitable for on-body devices since it does not have a ground plane for other electronic part of on-body system and requires balanced feeding structure. To be embedded on on-body devices, the proposed antenna is design with the unbalanced feed structure and ground. The performance of the proposed antenna is simulated and measured when it is placed on the human body phantom to consider the effect of the human body. The proposed antenna a 10 dB return loss bandwidth over the ISM band and monopole-like radiation pattern with low-profile. The antenna has the surface of appropriate for on-body communication environment.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1260-1266
• /
• 2013

The ribosomal DNA (rDNA) clusters of Hypsizygus marmoreus 3-10 and H. marmoreus 1-1 were analyzed in this study. The small subunit (SSU) and intergenic spacer 2 (IGS 2) was partially sequenced. The internal transcribed spacer 1 (ITS 1), 5.8S, internal transcribed spacer 2 (ITS 2), large subunit (LSU), intergenic spacer 1 (IGS 1), and 5S were completely sequenced. The rDNA clusters of H. marmoreus 3-10 and H. marmoreus 1-1 were 7,049 bp in length. The sequence of SSU rDNA, which corresponded to 18S rDNA, was 1,796 bp in length, and the sequence of LSU rDNA, which corresponded to 28S rDNA, was 3,348 bp in length. The ITS region that variable region and IGS region that non-transcribed spacer was 462 bp and 1,290 bp in length. The sequence of 5.8S rDNA and 5S rDNA was 153 bp and 43 bp in length, respectively. The 17 bp of the rDNA cluster in the H. marmoreus 3-10 strain was different to that in the H. marmoreus 1-1 strain, with 2 bp in the SSU, 3 bp in the ITS, 9 bp in the LSU, and 3 bp in the IGS. The analysis of the secondary structure revealed that the ITS regions of H. marmoreus 3-10 and H. marmoreus 1-1 have five stem-loop structures. Interestingly, among these structures, one different nucleotide sequence resulted in a different secondary structure in stem-loop V.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.161-169
• /
• 2007

The PLL equivalent augmented system incorporated with state feedback is proposed in this paper. The optimal value of filter time constant of loop filter in the phase-locked loop control system and the optimal state feedback gain designed by using linear quadratic regulator approach are derived. This approach allows the PLL control system to employ the large value of the phase-frequency gain $K_d$ and voltage control oscillator gain $K_o$. In designing, the structure of phase-locked loop control system will be rearranged to be a phase-locked loop equivalent augmented system by including the structure of loop filter into the process and by considering the voltage control oscillator as an additional integrator. The designed controller consisting of state feedback gain matrix K and integral gain $k_1$ is an optimal controller. The integral gain $k_1$ related to weighting matrices q and R will be an optimal value for assigning the filter time constant of loop filter. The experimental results in controlling the second-order lag pressure process using two types of loop filters show that the system response is fast without steady-state error, the output disturbance effect rejection is fast and the tracking to step changes is good.