• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.933-938
• /
• 1998

The hydration for the system of fluorogypsum and 20wt% blast furnace slag was investigated at liquid/soild ratio of 0.45 for 1, 3, and 7 days by using 3 kinds of accelerators such as K2SO4 Al2(SO4)3 $.$16-18H2O and AlK(SO4)2$.$12H2O After curing the hardened specimen was characterized by the compressive strength the content of combined water XRD, DTA and SEM It was found that the activating effect was increased in the order of K2SO4

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.393-402
• /
• 2017

Just like terrestrial cellular networks, underwater cellular communication networks, which can manage the overall network resource by adaptively allocating backhaul resource for each base station according to its ingress traffic, are necessary. In this paper, a new resource allocation protocol is proposed for the underwater cellular communication network, allocating backhaul resource of a base station proportional to its ingress traffic to the base station. This protocol is classified into two types dependent upon allocation period: the resource allocation protocol with adaptive period and that with fixed period. In order to determine a proper resource allocation protocol, the performance of the two protocols, in terms of reception rate, message overhead, and latency is compared and investigated via simulation. As a result, the resource protocol with adaptive period outperforms that with fixed period; the resource allocation protocol with fixed period results in a maximum of $10^2$ order longer queueing delay as well as $10^2$ order greater message overhead than that with adaptive period.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.203-208
• /
• 2006

This study was conducted to improve the control performance of a current variable-rate controller for granular fertilizers. Simulation model was developed. Optimized proportional, integral and derivative gains were determined by simulation model using 2nd order PID gain learning algorithm, and these control gains were evaluated through the field tests. Important results of this study are as follows; 1. Principles of pre-existing variable-rate application of granular fertilizers were investigated. 2. Simulation model of a PID controller that could simulate the control system was developed by using Matlab/Simulink program. The program was to determine PID control coefficients through the simulation model and 2nd order PID gain learning algorithm. 3. PID control coefficients obtained from the simulation were applied to the developed model. When the step input was given, Maximum overshoot were 1.96%, rise time were 0.05 sec, settling time were 0.06 sec and steady state error were 0.21 % respectively. 4. The simulation model was verified through field tests. The errors of maximum overshoot were 10%, rise time were 0.11 sec, settling time were 0.40 sec and steady state error were 8% because of loads and noises. Rise time was decreased to one third of that of the pre-existing system. 5. If the speed of a fertilizing machine is $0.3{\sim}0.6\;m/s$ and the maximum rotation speed of a discharging roller is 64 rpm, rise time would be 0.26 sec and fertilizing machine would cover the distance of $0.07{\sim}0.15\;m$ with settling time of 0.4 sec, fertilizing machine would cover the distance of $0.12{\sim}0.24\;m$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.485-496
• /
• 2006

Practical stability design method of main members of cable-stayed bridges is proposed and discussed through a design example. For this purpose, initial tensions of stay cables and axial forces of main members are firstly determined using initial shaping analysis of bridges under dead loads. And then the effective buckling length using system elastic/inelastic buckling analysis and bending moments considering $P-{\delta}-{\Delta}$ effect by second-order elastic analysis are calculated for main girder and pylon members subjected to both axial forces and moments, respectively. Particularly, three load combinations of dead and live loads, in which maximum load effects due to live loads are obtained, are taken into account and effects of live loads on effective buckling lengths are investigated.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.156-162
• /
• 2011

The control loop time delay caused by sampling, the zero-order-holder effect and calculations is inevitable in the digital control of dc-dc switching converters. The time delay will limit the bandwidth of the control loop and therefore degrade the transient performance of digital systems. In this paper, the quantization time delay effects with different time delay values based on a generic second-order system are analyzed. The conclusion that the bandwidth of digital control is reduced by about 20% with a one cycle delay and by 50% with two cycles of delay in comparison with no time delay is obtained. To compensate the time delay and to increase the control loop bandwidth, a duty ratio predictive control scheme based on linear extrapolation is proposed. The compensation effect and a comparison of the load variation transient response characteristics with analogy control, conventional digital control and duty ratio predictive control with different time delay values are performed on a point-of-load Buck converter by simulations and experiments. It is shown that, using the proposed technique, the control loop bandwidth can be increased by 50% for a one cycle delay and 48.2% for two cycles of delay when compared to conventional digital control. Simulations and experimental results prove the validity of the conclusion of the quantization effects of the time delay and the proposed control scheme.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.23-33
• /
• 2009

The inherent aeromechanical complexity of a rotor system necessitated the comprehensive analysis code for helicopter rotor system. In the present study, an aerodynamic analysis module has been developed as a part of rotorcraft comprehensive program. Aerodynamic analysis module is largely classified into airload calculation routine and inflow analysis routine. For airload calculation, quasi-steady analysis model is employed based on the blade element method with the correction of unsteady aerodynamic effects. In order to take unsteady effects - body motion effects and dynamic stall - into account, aerodynamic coefficients are corrected by considering Leishman-Beddoes's unsteady model. Various inflow models and vortex wake models are implemented in the aerodynamic module to consider wake induced inflow. Specifically, linear inflow, dynamic inflow, prescribed wake and free wake model are integrated into the present module. The aerodynamic characteristics of each method are compared and validated against available experimental data such as Elliot's induced inflow distribution and sectional normal force coefficients of AH-1G. In order to validate unsteady aerodynamic model, 2-D unsteady model for NACA0012 airfoil is validated against aerodynamic coefficients of McAlister's experimental data.

• Journal of Korea Multimedia Society
• /
• v.24 no.2
• /
• pp.199-207
• /
• 2021

It is very important to support real-time on the inspection equipment based on Windows. In particular, in the system using MIL-STD-1553B communication, which is widely used in military weapon systems, real-time is required for inspection equipment that uses mostly platforms based on Windows such as Industrial PCs. However, in order to use a complete real-time operating system such as VxWorks, the purchase cost is expensive and the implementation is complicated on the system, so it is not suitable for inspection equipment that requires simple functions to just check go or no-go. Therefore, in this paper, a Real-Time implanted Kernel(RTiK) in the Windows kernel is implanted in order to improve these defects, and real-time performance is implemented for periodically MIL-STD-1553B communication by Deferred Procedure Call(DPC) of Windows. Also, it was verified that the period of up to 2ms was guaranteed with a RDTSC into the EDX:EAX registers for measuring the periodicity.

• Journal of Korean Institute of Industrial Engineers
• /
• v.8 no.2
• /
• pp.3-14
• /
• 1982

The purpose of this study is to establish the function of a sub-system for System Alternatives Feasibility Estimation (SAFE) in R & D Project Planning Phase (RDPPL). It is the fundamental function of the RDPPL/SAFE that selected an optimal planning system alternative of all, considered at RDPPL/SAS, by logical means in view of feasibility. In this paper, improving the function of RDPPL/SAFE, mathmatical models in order to quantify methods determining and integrating the feasibility funtion in each terminal system with a multi-stage process are examined.

• Journal of the Korean Professional Engineers Association
• /
• v.43 no.2
• /
• pp.53-59
• /
• 2010

This research is about the inspection system which is for maintenance of laterals of local RBF(River bed Filtration). Inspection system is designed for local use in order to endure water resistance up to 50m and it also can examine the internal condition and colgging of laterals by moving inside of the laterals about 100m back and forward. We will conduct performance test of inspection system at the lacal RBF site and present its result.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.68.2-68
• /
• 2001

A position control system using hydraulic cylinder is modeled as a nonlinear system. In order to control this nonlinear system, in this paper, the fuzzy PID control technique which has time-varying control parameters is adopted. In this study, an exclusive sensor to detect the position of hydraulic cylinder is used, which is embeded in hydraulic cylinder.