• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.43-50
• /
• 2006

In this successive study, the analytical realization of coupled system was introduced using the times series identification and spectrum analysis, which was compared with conventional FFT spectrum. Also, the numerical responses of second order system, which is coupled, were solved using the numerical calculation of Runge-Kutta Gill method. After numerical analysis, the displacement, velocity and acceleration were acquired. Among them, the response of displacement was used for the analysis of time series spectrum. Among several time series, the ARMAX algorithm was proved to be appropriate for the spectrum analysis of the coupled system. Using the separated response of 1st and 2nd mode, the mode was calculated separately. And the responses of mixed modes were also analyzed for calculation of the mixed modes in the coupled system.

• Journal of computational fluids engineering
• /
• v.11 no.4 s.35
• /
• pp.39-47
• /
• 2006

In this paper, the authors developed a multidimensional interpolation method inside a finite volume cell in the computation of high-order accurate numerical flux such as the fifth order WEND (weighted essentially non-oscillatory) scheme. This numerical method starts from a simple Taylor series expansion in a proper spatial order of accuracy, and the WEND filter is used for the reconstruction of sharp nonlinear waves like shocks in the compressible flow. Two kinds of interpolations are developed: one is for the cell-averaged values of conservative variables divided in one mother cell (Type 1), and the other is for the vertex values in the individual cells (Type 2). The result of the present study can be directly used to the cell refinement as well as the convective flux between finer and coarser cells in the Cartesian adaptive grid system (Type 1) and to the post-processing as well as the viscous flux in the Navier-Stokes equations on any types of structured and unstructured grids (Type 2).

• International journal of advanced smart convergence
• /
• v.2 no.1
• /
• pp.18-20
• /
• 2013

The significance, is to introduce a novel way to employ the improved Runge-Kutta fifth order five stage method, here after called as Modified IRK(5,5) method, for system of second order robot arm problem and variations in angles at the joints in which parameters governing with two degrees of freedom which requires lesser number of function evaluations per time step as compared to the existing ones, in order to save time and spaceAn ultimate aim of this present paper is to solve application problem such as robot arm and initial value problems by applying Runge-Kutta fifth order five stage numerical techniques. The calculated output for robot arm coincides with exact solution which is found to be better, suitable and feasible for solving real time problems.

• Bulletin of the Korean Mathematical Society
• /
• v.53 no.2
• /
• pp.423-440
• /
• 2016

The bubble stabilization technique of Chebyshev-Legendre high-order element methods for one dimensional advection-diffusion equation is analyzed for the proposed scheme by Canuto and Puppo in [8]. We also analyze the finite element lower-order preconditioner for the proposed stabilized linear system. Further, the numerical results are provided to support the developed theories for the convergence and preconditioning.

• Journal of Hydrospace Technology
• /
• v.1 no.1
• /
• pp.66-74
• /
• 1995

Unknown parameters can be determined by system identification techniques. Extended Kalman filter method was introduced as a real time estimator of hydrodynamic derivatives but it has the problem named the coefficient drift. In this study, 2nd order filter estimates hydrodynamic derivatives in Abkowitz model In order to reduce the coefficient drift, parallel processing is used. The measured state and ship trajectory are compared with the estimated values. Parallel processing of 2nd order filter gives very similar results to parallel processing of extended Kalman filter. Parallel processing cannot not remove the coefficient drift perfectly, but it reduces the estimation error.

• Structural Engineering and Mechanics
• /
• v.85 no.2
• /
• pp.207-216
• /
• 2023

Three time-discontinuous Galerkin quadrature element methods (TDGQEMs) are developed for structural dynamic problems. The weak-form time-discontinuous Galerkin (TDG) statements, which are capable of capturing possible displacement and/or velocity discontinuities, are employed to formulate the three types of quadrature elements, i.e., single-field, single-field/least-squares and two-field. Gauss-Lobatto quadrature rule and the differential quadrature analog are used to turn the weak-form TDG statements into a system of algebraic equations. The stability, accuracy and numerical dissipation and dispersion properties of the formulated elements are examined. It is found that all the elements are unconditionally stable, the order of accuracy is equal to two times the element order minus one or two times the element order, and the high-order elements possess desired high numerical dissipation in the high-frequency domain and low numerical dissipation and dispersion in the low-frequency domain. Three fundamental numerical examples are investigated to demonstrate the effectiveness and high accuracy of the elements, as compared with the commonly used time integration schemes.

• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.92-97
• /
• 2015

A study on reaction kinetics for a PTMG/TDI prepolymer with 2,2'-dichloro-4,4'-methylenedianiline (MOCA), of which formulations may be generally used for fabricating high performance polyurethane elastomers, was peformed using non-isothermal differential scanning calorimetry (DSC). A number of thermograms were obtained at several constant heating rates, and analysed using Flynn-Wall-Ozawa (FWO) isoconversional method for activation energy, $E_a$ and extended-Avrami equation for reaction order, n. Urea formation reaction of the present system was observed to occur through the simple exothermic reaction process in the temperature range of $100{\sim}130^{\circ}C$ for the heating rate of $3{\sim}7^{\circ}C/min$. and could be well-fitted with generalized sigmoid function. Though activation energy was nearly constant as $53.0{\pm}0.5kJ/mol$, it tended to increase a little at initial stage, but it decreases at later stage by the transformation into diffusion-controlled reaction due to the increased viscosity. Reaction order was evaluated as about 2.8, which was somewhat higher than the generally well-known $2^{nd}$ order values for the various urea reactions. Both the reaction order and reaction rate explicitly increased with temperature, which was considered as the indication of occurring the side reactions such as allophanate or biuret formation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.3
• /
• pp.85-92
• /
• 2009

A lot of B2C Internet shopping mall companies are establishing various strategies in order to make a result to be further better than it. But They are experiencing trouble by restriction like manpower or financial issue. Therefore, frying to grasp how an assistance degree of a company In B2C Internet shopping mall success factors affects will be important information in resources distribution of management strategic which is established by B2C Internet shopping mall company to survives in unlimited competition. In this paper, It is purpose to find which is success factors affecting to a finance and the other part of results in B2C Internet shopping mall companies. In order to achieve a study purpose, we make a model by literature study and inquiries and analysis the result data. Consequently for successful B2C Internet shopping mall operation, it needs a assistance of a company fully. But the company which shall get a maximum effect with resources limited is difficult to assistance fully. This study will be used to establish strategies of distribution of resources appropriately for the company which is not fully assist B2C Internet shopping mall operation because of restrictions of manpower, material and finance.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.2
• /
• pp.368-381
• /
• 2014

The purpose of this study is to diagnose the lifelong education promotion system in Busan and to establish a desirable promotion system. In the study, we search for the optimal alternative to manage lifelong education exclusive organization(Busan Institute for lifelong Education) and seek ways to vitalize the lifelong education promotion system in Busan. The focus is also placed on completing a network-type governance system by strengthening the connection and cooperation among the parties. In order to make the promotion system function efficiently, the vitalizing methods of lifelong education promotion system can be roughly categorized into some kind as follows : strengthening the network between the interested parties and establishing their roles, restructuring legal as well as administrative and financial support system; enhancing education and public relations; intensifying local infrastructure of lifelong education; and boosting accessibility and expanding exchange and cooperation.

• Korean Management Science Review
• /
• v.9 no.1
• /
• pp.3-15
• /
• 1992

In this paper, we study a manufacturing system of serial stages with general service times, in which the production of each stage and the coordination of stages are controlled by Kanban discipline. This Kanban discipline is modeled as a Discrete Event Dynamic System and a system of recursive equations is applied to study the dynamics of the system. The recursive relationship enables us to compare this Kanban discipline with the other blocking disciplines such as transfer blocking, service blocking, block-and-hold b, and block-and-hold K, and the Kanban is shown to be superior to the other disciplines in terms of makespan and throughput. As a special case, two stages Kanban system is modeled as $C_2/C_2/1/N$ queueing system, and a recursive algorithm is developed to calculate the system performance. In optimizing the system performance, the stochastic optimization approach of Robbins-Monro is employed via perturbation analysis, the way to estimate the stochastic partial derivative based on only one sample trajectory of the system, and the required commuting condition is verified. Then the stochastic convexity result is established to provide second-order optimality condition for this parametric optimization problem.