• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.55-62
• /
• 1998

Soils contaminated with hydrocarbons and residual metals can be effectively treated by soil washing. In developing the soil washing process several major effects for separating contaminants from coarse soils progressively improved upon combinations of mining and chemical processing approaches. The pilot-scale soils washing process consists of the four major parts : 1) abrasive scouring, 2) scrubbing action using a washwater that is sometimes augmented by surfactants or other agents, 3) rinsing, and 4) regenerating the contaminated washwater. The plant was designed based upon the treatment capacity > 5 ton/hr on site. The lumpy contaminated soil fractions first experience deagglomeration and desliming passing through a rolling mill pipe. In the second unit the attrition scrubbing module equipped with paddles uses high-energy to remove contaminants from the soils. And a final rinsing system is assembled to separate the washwater containing the contaminants and very fine soils from the washed coarse soils. For recycling the contaminated washwater passes through a washwater clarifier specifically designed for flocculation, sedimentation and gravity separation of fine as well as flotation and separation of oils from the washwater. In order to more rapidly assess the applicability of soil washing at a potential site while minimizing the expense of mobilization and operation, a mobile-type soil washing process which is self-contained upon a trailer will be further developed.

• Journal of Environmental Policy
• /
• v.11 no.4
• /
• pp.85-105
• /
• 2012

In this paper, the energy efficiency of wastewater utilities was evaluated to explore ways to save energy via operational measures. The correlation of each wastewater characteristic parameter to energy was assessed to find a set of parameters that explained most of the variations in energy use among utilities. The results show that increases in inflow, influent COD concentration, and ratio of advanced treatment generally increased the energy use. On the other hand, increases in load factor (influentaverage flow/design flow) reduced the energy use. In the regression analysis, the energy efficiency was highest in the A2O advanced process. On the other hand, the membrane process (among the advanced processes) and the contacted aeration process (among the secondary processes) require more efforts in saving energy. However, the data base system related to energy use must be supplemented in order for more accurate analysis of energy consumption in wastewater treatment facilities. In particular, i) electricity consumption of relay pumps and, ii) energy usage per unit process, iii) pump power usage to discharge treated wastewater in a long distance, if necessary, and iv) alternative energy production and utilization status must be recorded. By utilizing the results of the analysis conducted in this study, it is possible to quantify a level of energy savings needed and establish customized energy saving measures to achieve a certain target level for benchmarking a successful case of wastewater utilities.

• Journal of the Economic Geographical Society of Korea
• /
• v.9 no.3
• /
• pp.379-395
• /
• 2006

The purpose of this study is to analyze the spatial characteristics of travel patterns and travel behaviors of transit users in the Metropolitan Seoul area. We apply the data mining techniques to explore the travel patterns of transit users from the T-money card database which has been produced over 10,000,000 transaction records per day. The database contains the information of locations and times of origin, transfer, and destination points for each transaction as well as the informations of transit modes taken via the transaction. We develop an data mining algorithm to explore traversal patterns from the enormous information. The algorithm determines the travel sequences of each passenger, and produce the volumes of support on each points (stops) of transportation networks in the Metropolitan Seoul area. In order to visualize the spatial patterns of travel demands for transit systems we apply GIS techniques, and attempt to investigate the spatial characteristics of travel patterns and travel demand. Subway stops located in the Gangnam area appear the highest peak for the travel origin and destination, while the CBD in the Gangbuk stands at the second position. Two or three sub-peaks appear at the densely populated residential areas developed as the high-rise apartment complex. Subway stations located along the Subway Line 2, especially from Guro to Samsung receive heavy travel demand (total support), while bus stops located at the CBD in the Gangbuk stands the highest travel demand by bus.

• Journal of Korean Academy of Nursing
• /
• v.13 no.2
• /
• pp.87-104
• /
• 1983

It has been well documented that animals exposed to cold show increased activity of thyroid gland. The calorigenic action of thyroid hormone has been demonstrated by a variety of in vivo and in vitro studies. According to Edelman et al., the thyroid thermogenesis is due to activation of energy consuming processes, especially the active sodium transport by the hormone in target tissues. If so, the increase in thyroid activity during cold exposure should induce increased capacity of sodium transport in target tissue and the change in tissue metabolism should be precisely correlated with the change in Na+_K+_ATPase activity of the tissue. This possibility was tested in the present study: in one series, changes in oxygen consumption and Na+_K+_-ATPase activity of liver preparations were measured in rats as a function of thyroid status, in order to establish the effect of thyroid hormone on the tissue respiration and enzyme system in another series, the effect of cold stimulus on the serum thyroid hormone level, hepatic tissue oxygen consumption and Na+_K+_ATPase activity in rats. The results obtained are as follows: 1. The Na+_dependent oxygen consumption of liver slices, the oxygen consumption of liver mitochondria and the Na+_K+_ATPase activity of liver preparations were significantly inhibited in hypothyroidism and activated in hyperthyroidism. Kinetic analysis indicated that the Vmax. of Na+_K+_ATPase was decreased in hypothyroidism and increased in hyperth)'roidism. 2. In cold exposed rats, the serum triiodothyronine (T₃) level increased rapidly during the initial one day of cold exposure, then declined slowly to the control level after two weeks. The serum thyroxine (T₄) level decreased gradually throughout the cold exposure. Accordingly the T₃/T₄ratio increased. The mitochondrial oxygen consumption and the Na+_dependent oxygen consumption of liver slices increased during the first two days and then remained unchanged thereafter The activity of the Na+_K+_ATPase in liver preparations increased during cold exposure with a time course similar to that of oxygen consumption. Kinetic analysis indicated that the Vmax. of Na+_K+_ATPase increased. 3. Once the animal was adapted to cold, induction of hypothyroidism did not significantly alter the hepatic oxygen consumption and Na+_K+_ATPase activity. These results indicate that: 1) thyroid hormone increases capacities of mitochondrial respiration and active sodium transport in target tissues such as liver; 2) the increased T₃level during the initial period of cold exposure facilitates biosynthesis of Na+_K+_ATPase and mitochondrial enzymes for oxidative phosphorylation, leading to enhanced production and utilization of ATP, hence heat production.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.194-194
• /
• 2008

Lead oxide based ceramics, represented by PZT, are the most widely used materials for piezoelectric actuators, sensors, and transducers due to their excellent piezoelectric properties. In particular, high-performance multilayered piezoelectric ceramics for advanced electronic components have drawn great attention. In order to develop piezoelectric ceramics capable of being sintered at low temperature for multilayer piezoelectric device applications, the effect of CuO additions on the microstructures and electromechanical properties of the 0.4Pb$(Mg_{1/3}Nb_{2/3})O_3-0.25PbZrO_3-0.35PbTiO_3$ ceramics was investigated. The samples with CuO addition were synthesized by ordinary sintering technique. X-ray diffractions indicated that all samples formed a single phase perovskite structure. The addition of CuO improved the sinterability of the samples and caused an increase in the density and grain size at low temperature. The optimum sintering temperature was lowered by CuO additions. Excellent piezoelectric and electromechanical responses, $d_{33}$ ~ 663 pC/N, $k_p$ ~ 0.72, were obtained for the samples of high density with 0.1 wt% CuO addition sintered at $1050^{\circ}C$ for 4 h in air. These results show that the piezoelectric properties of PMNZT ceramics can be improved by controlling the microstructure and this system is potentially a good candidate as multilayer piezoelectric device for a wide range of electro-mechanical transducer applications.

• Journal of Environmental Science International
• /
• v.24 no.11
• /
• pp.1343-1362
• /
• 2015

As a result of analysis based on the observed data for BOD, COD and TOC in order to manage non-biodegradable organics in the Geumho River, COD/BOD ratio was analyzed as the occupying predominance proportion. In this study, the classification(changes in water quality measurement : increase, equal, decrease) and measurement of BOD and COD were analyzed for trends over the past 10 years from 2005 to 2014 in the Geumho River. The Geumho River is expected to need non-biodegradable organics management because BOD was found to be reduced 61.1% and COD was found to be increased 50%. As a result of the analysis of land use, the Geumho-A is a unit watershed area of $921.13km^2$, which is the most common area that is occupied by forests. The Geumho-B is a unit watershed area of $436.8km^2$, which is the area that is highest occupied by agriculture and grass of 24.84%. The Geumho-C is a unit watershed area of $704.56km^2$ accounted for 40.29% of the entire watershed, which is the area that is occupied by urban of 15.12%. Load of non-biodegradable organics, which is not easy biodegradable according to the discharge, appeared to be increased because flow coefficient of COD and TOC at the Geumho-B were estimated larger than 1 value. The management of non-point sources of agricultural land is required because the Geumho-B watershed area occupied by the high proportion of agriculture and field. In this segment it showed to increase the organics that biodegradation is difficult because the ratio of BOD and TOC was decreased rapidly from GR7 to GR8. Thus, countermeasures will be required for this.

• Research in Plant Disease
• /
• v.17 no.2
• /
• pp.142-147
• /
• 2011

In order to develop a environmentally friendly control protocol for managing tomato leaf mold disease in the field, we employed bacteria- and fungi-based commercially available microbial preparations. The field experiment was conducted from April to July in 2010. Average incidence rates tomato leaf mold caused by Fulvia fulva were 13.1% at the two plastic houses located in Jangsung, Jeonnam area. Initially 11 microbial preparations were tested for antifungal activity against F. fulva in vitro. Among them, 7 selected preparations showed to be inhibited the mycelial growth of the fungal pathogen over 50%. Four microbes suppressed disease incidence as much 50% under greenhouse condition. Eventually in the field two microbial products including Bacillus subtilis GB-0365 and B. subtilis KB-401 respectively were showed control value up to 71.8% for four times sprays from 20 days to 70 days after transplanting. Furthermore, the control value of three times spray program demonstrated 79.3%. Efficacy of the three and four spray programs was more effective than that of non-spray control treatment. Our results indicated that adjustment of application method of commercially available microbial preparation could be used to control a target plant disease as an effective and efficient crop protection system for organic farming.

• Korean Journal of Organic Agriculture
• /
• v.8 no.3
• /
• pp.131-146
• /
• 2000

This experiment was focused on finding out the potential problems in organic farming system, which is recently emphasized on the produce of horticultural crops due to the serious environmental deterioration. Thus, in this study, the effect of the application of organic farming materials in soil on plant growth and components of chinese cabbage and the soil Physicochemistry property were compared with conventional culture. The results were summarized as follows : 1. The effect of soil chemical properties after application of organic farming materials, The amounts of pH and O.,M. in N, P, K treated plot were few of change, To the contray, fermentation compost and microorganisms fermentation compost treated plot were some increase, Amount of P$_2$O$_{5}$ , Ca and increase in comparison with the N, P, K treated plot, Specially chicken manure+ microorganisms fermentation compost treated plot was the highest. 2. Change of soil microbial after application of organic farming materials, The number of bacteria and actinomycetes in N, P, K treated plot were appeared definite direction, to the fermentation compost and microorganisms fermentation compost treated plot showed the increased tendency, specially, chicken manure+ microorganisms fermentation compost treated plot was the highest, 3. The growth characteristic of chinese cabbage after application of organic farming materials was superior in order of chemical fertilizers plot> microorganisms fermentation compost plot> fermentation compost plot. It shows the NO$_3$$^{[-10]}$ accumulation in chinese cabbage was higher in the outer leaves than in the inner leavess. It was some lower in the microorganisms fermentation compost plot, it was the highest at chemical fertilizers plot , all inner and outer leaves.

• Journal of Gifted/Talented Education
• /
• v.25 no.4
• /
• pp.469-491
• /
• 2015

The present study investigated the inhibition mechanisms of gifted children, which is one of the main executive functions in human cognitive system. The inhibition process was subdivided into cognitive and emotion aspects in order to examine the interplay between these two aspects with respect to inhibition processing. In Experiment 1, word-color Stroop task was used to study the cognitive inhibition process of 100 gifted children(Gender: 62 males, 38 females; Academic grade: 46 Elementary school students, 54 Secondary school students). In addition, emotional Stroop task was utilized in Experiment 2 to examine the effect of emotional component during cognitive inhibition process. Results revealed a significant cognitive cost (i.e., word-color Stroop effect) when participants had to withhold automatic response during cognitive inhibition task in Experiment 1. Such cognitive cost was reduced as the chronological age of the participants increased, with no difference in gender. The results in Experiment 2 showed no significant emotional inhibition cost (i.e., emotional Stroop effect) during cognitive inhibition task, and there was no effect of gender nor age. This suggests that the emotional component conveyed in words did not lead to cognitive bias effects. This study proposes that the cognitive and emotional inhibition processes are seemingly independent mechanisms that engage in complex interactions during inhibition processing of behavioral response.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1241-1246
• /
• 1999

Jeungpyun has a unique sponge-like texture and sour taste imparted by the lactic acid and alcohol that are produced by the addition of Takju(turbid rice wine) as a starter. Its consumption, however. has been decreased due to the long preparation time, the difficulties in quality control and the offensive odor derived from the Takju. The present study was carried out in order to shorten the preparation time and to improve the quality of Jeungpyun. To achieve the objectives an appropriate commercial lactic acid starter was selected and a cofermentation system with yeast was developed. A starter containing Lactococcus lactis, Lactococcus cremoris and Lactococcus diacetylactis was selected based on the acid production rate and the quality of the produced sour taste. It took 3 hr for the lactic acid fermentation of rice slurry. The optimum addition levels of the lactic acid starter and yeast were 0.45% and 0.60%, respectively. The lactic acid fermented rice slurry was mixed with the rice slurry separately fermented for 2 hr by yeast, and cofermented for another 1 hr before steaming. Jeungpyun Prepared by the developed method was superior in quality to that Prepared by conventional method using Takju. The developed method reduced the preparation time more than 50% compared with the conventional method.