• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1532-1548
• /
• 2008

The tunnel type spillways is under construction to increasing water reservoir capacity in Dae-am dam. The tunnel outlet was planned to be made after installing slope stabilization system on natural slope there. Generally, the tunnel outlet is made perpendicularly to the slope, but in this case, it had to be made obliquely to the slope for not interrupting flow of river. Because of excavation in condition of natural slope caused to deflecting earth pressure, the outlet couldn't be made. So, artificial ground made with concrete that it was constructed in the outside of tunnel for producing the arching effect which enables to make a outlet. We were planned tunnel excavation was carried out after artificial ground made. Artificial ground made by poor mix concrete of which it was planned that the thickness was at least 3.0m height from outside of tunnel lining and 30cm of height per pouring. Spreading and compaction was planned utilized weight of 15 ton roller machine. In order to access of working truck, slope of artificial ground was designed 1:1.0 and applied 2% slope in upper pert of it for easily drainage of water. In addition to, upper pert of artificial ground was covered with soil, because of impaction of rock fall from upper slope was made minimum. The tunnel excavation of the artificial ground was designed application with special blasting method that it was Super Wedge and control blasting utilized with pre-percussion hole.

• Korean Journal of Health Education and Promotion
• /
• v.15 no.1
• /
• pp.151-163
• /
• 1998

The purpose of this study is to find options which reduce the job stress and to enhance morale through a variable analysis, and also apply this data in the legal and administration fields. The data for the research was obtained from 217 dental hygienists working in the dental clinics, dental hospitals and university's dental hospitals' in Seoul. The tool used by this study was a Questionnaire measuring on-the-job stress of dental hygienists, was a modified and revised. The Questionnaire version used to measure bank's job stress and used to suggest options by Dae-ha Yoon(1991). Classification of items for measuring job stress was based on Theoretical Study on Job Stress by Dae-hyon Song(1986). The scale used in study was the two points (yes or no in the job stress) scale measuring for variables. The period of data collection was 30 days from December 4, 1995 to January 5, 1996. The methods of data collection were self-writing, direct visit, and postal Questionnaire answering, 224 copies of Questionnaire data were collected, but only 217 copies were used. 7 copies could not be analyzed, were not used for this study. The data analysis was conducted by SPSS after coding the collected raw data. The general characteristics was obtained from real digits and percentages. In order to analyze the difference of sub-variables against the job stress based on general characteristics. Mean, Standard Deviation, and F test (ANDVA) were conducted. The following were the results of job stress variables: 1. Meaningful variable affecting the working organization, is compensation system(p〈0.03). 2. Meaningful variable affecting the working period, is work overload(p〈0.02). 3. Meaningful variable affecting average patients per day, is the career management and payment(p〈0.04, p〈0.01). 4. Meaningful variable affecting number of staff, is the comrade relationship, role conflict among patients, work overload, and job overload(p〈0.000, p〈0.05, p〈0.04, p〈0.01). The comrade relationship is most affected to the number of staffs aides. 5. Meaningful variables affecting job diversion, are the desire and value, the non-role play, and the environment(p〈0.003, p〈0.02, p〈0.005).

• Journal of Intelligence and Information Systems
• /
• v.12 no.2
• /
• pp.99-123
• /
• 2006

In an effect to composite an optimal supply chain, this study has introduced an agent-based negotiation as a method to assign a lot of orders to a large number of participants. As a resources allocation mechanism to form a strategic cooperation based on information sharing between supply chain members(buyers, manufacturers, suppliers), this agent negotiation provides coordination functions allowing all participants to make a profit and accomplishing Pareto optimum solution from the viewpoint of a whole supply chain. A SET model-based scheduling takes into consideration both earliness production cost and tardiness production cost, along with a competitive relationship between multiple participants. This study has tried to prove that the result of an agent-based negotiation is a Pareto optimal solution under the dynamic supply chain environment, establishing the mathematical formulation for a performance test, and making a comparison with the heuristic Branch & Bound method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1837-1844
• /
• 2016

This paper proposes an antenna of the fork type structure that operates in the UWB (Ultra Wide Band) frequency band (3.1 ~ 10.6 GHz). The proposed antenna is attached a circular patch in order to obtain the UWB band characteristics to the fork-type patch antenna. The ground plane is implemented in a arc-shape configuration. The effect of various parameters of the modified fork type radiating patch and partial arc ground plane for UWB operation is investigated. The proposed antenna is made of $34.0{\times}50.0{\times}1.0mm^3$ and is fabricated on the permittivity 4.4 FR-4 substrate. The experiment results shown that the proposed antenna obtained the -10 dB impedance bandwidth 8200 MHz (2.7 ~ 10.9 GHz) covering the UWB bands. This result satisfied the characteristics of ultra-wideband and the proposed antenna will be applicable to an ultra wideband system.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.279-287
• /
• 2010

Interior permanent magnet synchronous motor(IPMSM) adjustable speed drives offer significant advantages over induction motor drives in a wide variety of industrial applications such as high power density, high efficiency, improved dynamic performance and reliability. This paper proposes efficiency optimization control of IPMSM drive using adaptive fuzzy learning controller(AFLC). In order to optimize the efficiency the loss minimization algorithm is developed based on motor model and operating condition. The d-axis armature current is utilized to minimize the losses of the IPMSM in a closed loop vector control environment. The design of the current based on adaptive fuzzy control using model reference and the estimation of the speed based on neural network using ANN controller. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal control of the armature current. The minimization of loss is possible to realize efficiency optimization control for the proposed IPMSM. The optimal current can be decided according to the operating speed and the load conditions. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using AFLC. Also, this paper proposes speed control of IPMSM using AFLC1, current control of AFLC2 and AFLC3, and estimation of speed using ANN controller. The proposed control algorithm is applied to IPMSM drive system controlled AFLC, the operating characteristics controlled by efficiency optimization control are examined in detail.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.3
• /
• pp.167-178
• /
• 2010

To diagnose a stator winding fault caused by a short-circuited turn in a permanent magnet synchronous motor (PMSM), an on-line based fault detecting scheme during motor operation is presented. The proposed scheme is based on monitoring the second-order harmonic components in q-axis current obtained through the harmonic analysis and a winding fault is detected by comparing these components with those in normal conditions. The linear interpolation method is employed to determine harmonic data in arbitrary normal operating conditions. To verify the effectiveness of the proposed fault detecting scheme, a test motor to allow inter-turn short in the stator winding has been built. The entire control system including harmonic analysis algorithm and fault detecting algorithm is implemented using DSP TMS320F28335. The proposed scheme does not require any additional hardware and can effectively detect a fault during motor operation so long as the steady-state condition is satisfied.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.552-562
• /
• 1997

This paper proposes a formal method on confromance testing for INAP(AIN) test sequence generation by optimization technique.In order to implement and prove the dffectiveness of the proposed method,we specify the SRSM of INAP protocol SRF in SDL and generate I/O FSM by using our S/W tool. We generate an opti-mal test sequence by applying our method our method to this reference I/O FSM. We prove experimentally that the length of the generated test sequence by our method is more effective and shorter(i.e 32% improved)than the one geverated by UIO method,and estimate that The test coverage space of our test sequence is larger that of UIO method.

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.397-406
• /
• 2014

Objectives: Perchloroethylene (PCE) is a volatile chemical widely used as a solvent in the dry-cleaning and textile processing industries. It was evaluated as Group 2 "probably carcinogenic to humans" by the Integrated Risk Information System (IRIS) of the United State Environmental Protection Agency (U.S. EPA) in 2012. In order to provide a scientific basis for establishing risk management measures for chemicals on the national priority substances list, aggregate risk assessment was conducted for PCE, included in the top-10 substances. Methods: We conducted the investigation and monitoring of PCE exposure (e.g., exposure scenario, detection levels, and exposure factors, etc.) and assessed its multi-media (e.g., outdoor air, indoor air, and ground water) exposure risk with a deterministic and probabilistic approach. Results: In human risk assessment (HRA), the level of human exposure was higher in the younger age group. The exposure level through inhalation at home was the highest among the exposure routes. Outdoor air or uptake of drinking water represented less than 1% of total contributions to PCE exposure. These findings suggested that the level of risk was negligible since the Hazard Index (HI) induced by HRA was below one among all age groups, with a maximum HI value of 0.17 when reasonable maximum exposure was applied. Conclusion: In conclusion, it was suggested that despite low exposure risk, further studies are needed considering main sources, including occupational exposure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.463-469
• /
• 2002

The governing equation and force-displacement rotations of a beam-column element on elastic foundation we derived based on variational approach of total potential energy. An exact static and dynamic 4×4 element stiffness matrix of the beam-column element is established via a generalized lineal-eigenvalue problem by introducing 4 displacement parameters and a system of linear algebraic equations with complex matrices. The structure stiffness matrix is established by the conventional direct stiffness method. In addition the F. E. procedure is presented by using Hermitian polynomials as shape function and evaluating the corresponding elastic and geometric stiffness and the mass matrix. In order to verify the efficiency and accuracy of the beam-column element using exact dynamic stiffness matrix, buckling loads and natural frequencies are calculated for the continuous beam structures and the results are compared with F E. solutions.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.263-275
• /
• 2001

With increasing of utilization of 1/1,000 Digital-Map being constructed with NGIS project, it is entering upon the stage that problem as the inspection of position accuracy of Digital-Map before its use. This paper evaluated position accuracy of Digital-Map being based on the construction of college facility management system into small area and presented modification/renovation of Digital-Map on area being occurred position error. With a view to evaluation of position error to building using RTK survey, position error was shown more than 0.5mm that is prescribed in survey-law. In order to acquire good position accuracy, first we carried out Static survey to college and selected control point. And, we evaluated coordinate value to important building from control point and compared these results with RTK survey results. Second, we carried out Affine transform based on the control point of building being surveyed with RTK, transformed pre-constructed Digital-Map and compared these results with RTK Survey results. We analyzed first and second method and presented improvement method of position accuracy of Digital-Map suited on small area.