• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.137-147
• /
• 1994

This study was designed to identify and quantitate airborne isocyanate simultaneously by HPLC. These samples were collected using 1-(2-pyridyl)piperazine(1-2PP) coated glass fiber filter from polyurethane painting works at 8 wood furniture factories in Kimpo and Inchun. The results obtained were as follows : 1. The most suitable mobile phase condition of simultaneously analyzing isocyanates was 0.01 M ammonium acetate buffer ACN(70/30) adjusted to pH 6.2 from the beginning of the analysis to 20 min and 0.01 M ammonium acetate buffer/ACN(50/50) adjusted to pH 6.2 from 21 min to 40 min using the gradient mode. The peaks of isocyanates were able to obtain within 30 min. 2. The recovery efficiencies for 2,6-TDI, 2,4-TDI, HDI and MDI urea derivates spiked at the target concentration on coated glass fiber tillers were 91.00, 93.42, 91.31 and 94.21 %, respectively. 3. The qualitative analysis of the isocyanates samples from polyurethane spray painting works in wood furnture factories identified Ihree isocyanates, 2,6-TDI, 2,4-TDI and MOI. And their concentration ranges were 0-312.6, 0-56.3 and $0-62.1{\mu}g/m^3$, respectively. A disadvantage of using the colorimetric method for isocyanate analysis is its inability of separating isocyanates. This study identified such three isocyanates as 2,6-TDI, 2,4-TDI and MDI from polyurethane spray painting works in wood furniture factories. These isocyanates were successfully quantitated by HPLC by modifying the mobile phase condition and switching to gradient mode.

• Food Science and Biotechnology
• /
• v.15 no.3
• /
• pp.482-484
• /
• 2006

The antioxidant activity of Bacillus polyfermenticus SCD was studied by partially purified culture extracts using various methods: ammonium sulfate precipitation, adsorption to Diaion HP-20 columns using polar solvents, and extraction using non-polar solvents. The 1,1-diphenyl-2-picyrylhydrazyl (DPPH) radical scavenging activity of these partially purified fractions was then investigated. The precipitate isolated using 75%-saturated ammonium sulfate was shown to contain about 77.2% DPPH radical scavenging activity. Using the Diaion HP-20 resin adsorption method, the fraction obtained using 60% ethanol and 60% methanol possessed 76.7 and 89.5% DPPH radical scavenging activity, respectively. Fractions obtained by extracting with the non-polar solvents 80 mg/mL chloroform, 80 mg/mL n-hexane, 80 mg/mL ethyl acetate, and 80 mg/mL butanol contained 68.4, 75.0, 70.7, and 87.5% DPPH radical scavenging activity, respectively. Further study is needed to characterize the antioxidant substance(s) released by B. polyfermenticus SCD cultures.

• Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.210-215
• /
• 2008

The present study investigates the effect of oxidation-reduction potential (ORP) and organic compounds on specific anaerobic ammonium oxidation activity (SAA) using batch experiments. The batch tests were based on the measurement of nitrogen gas production. The relationship between ORP and dissolved oxygen (DO) concentration was found to be ORP (mV) = 160.38 + 68 log [$O_2$], where [$O_2$] is the DO concentration in mg/L. The linear relationship obtained between ORP and SAA ($R^2$ = 0.99) clearly demonstrated that ORP can be employed as an operational parameter in the Anammox process. At ORP value of -110 mV, the SAA was $0.272{\pm}0.03\;g\;N_2-N\;(g\;VSS)^{-1}\;d^{-1}$. The investigation also revealed inhibitory effect of glucose on the SAA while acetate concentration up to 640 mg COD/L (corresponding to 10 mM) had stimulating effect on the SAA. However, acetate concentration beyond 640 mg COD/L had inhibitory effect on the Anammox activity. The results indicated that nitrogen rich wastewaters containing low level organic matter could be better treated by Anammox microorganisms in real-world conditions after some acidification process.

• Journal of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.113-120
• /
• 1964

The critical examination of the spectrophotometric method for determining microgram quantities of phosphate by the n-butyl acetate extraction as molybdophosphoric acid and subsequent development of the molybdenum blue has been made. In this procedure from 2 to 8 ${\mu}g$. of phosphate-phosphorus can be determined under optimum conditions. The final concentration of ammonium molybdate and the final acidity of perchloric acid for the formation of heteropoly acid are suitable to be ranges of 0.5 to 1.1% and 0. 5 to 1. 1 N respectively, and subsequently extracted with 10 ml. of n-butyl acetate. The extract is developed to molybdenum blue with 5.0 ml. of 1. 3% stannous chloride in 1N hydrochloric acid. The color is stable for at least one hour in the use of perchloric acid for the condensation. In order to determination of submicrogram amounts of phosphate, the sensitivity of the molybdenum blue method is hardly sufficient, a sensitive and stable molybdenum(V)-thiocyanate complex method has been investigated. By the procedure less than 1.2 ${\mu}g$. of phosphate-phosphorus can be determined with an accuracy of less than 5% the relative error. The molybdenum(Ⅵ) extracted by the above procedure is reduced to molybdenum(V) in the extract directly with a solution of 4 to 10% of stannous chloride, 0.5 to 1.5 mM of copper, and 0.1 to 0.9 N of perchloric acid as final concentration in 4.3 to 6.3 N of hydrochloric acid or 9.0 to 13.0 N of sulfuric acid by heating for one minute in boiling water, after cooling, the molybdenum(V)-thiocyanate complex color is developed by adding 6.0 M ammonium thiocyanate solution making the final concentration to be in a range of 0.4 to 0.9 M. This procedure the very sensitive, reliable, and stable can be applied to determining submicrogram amounts of phosphate in natural waters with a precision of 1.6 ${\times}\;10^{-2}$ the standard deviation as absorbance.

• Korean Journal of Clinical Laboratory Science
• /
• v.40 no.1
• /
• pp.18-25
• /
• 2008

In classical titrimetric analyses, the major concern is the concentration of titrant, usually the aqueous solution of hydrochloric acid or sodium hydroxide, that could be changed as time goes by and it is accompanied with the inaccuracy of the resulting data. And the statistical approach, the nonlinear regression analysis, which is a well-known statistical method, was introduced to determine the accurate concentration of the titrant and the exact value of parameters, $K_a$, r, $C_a$, $C_b$, for 0.01 M aqueous solutions of analytes, sodium pyruvate, sodium acetate, sodium bicarbonate, ammonium hydroxide, ammonium chloride and acetic acid at $25^{\circ}C$. We used Gauss-Newton method for the linearlization of the nonlinear titration system and the two-parameter fitting showed appreciable convergent data for the parameters of the analytes set with the various range of $K_a$ value.

• Archives of Pharmacal Research
• /
• v.25 no.3
• /
• pp.258-269
• /
• 2002

2-Thiouracil-5-sulfonylchloride 1 reacted with a series of aromatic and heterocyclic amines to give 2a-j. The same compound 1 was reacted with a series of sulphonamides giving different sulphonamides of type 3a-e. On the other hand compound 1 was allowed to react with p-aminoacetophenone givining compound 4 which in turn was allowed to react with derivatives of alkyl thiosemicarbazides to give thiosemicarbazones of type 5a-e, also compound 4 was monobrominated to give compound 6 which in turn was reacted thiosemicarbazones of some aldehydes to give the corresponding thiazole derivatives 7a-f. In the same time compound 4 was reacted with a series of aromatic and heterocyclic aldehydes givining chalcones 8a-g (Claisen-Schemidt reaction). Also compound 4 was allowed to react with a series of aromatic and heterocyclic aldehydes, ethyl cyano acetate and/or malononitrile, and ammonium acetate giving pyridine derivatives 9a-d and 10a-e respectively. The biological effects of some of the new synthesized compounds was also investigated.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.109-114
• /
• 2004

A sensitive method for quantitation of glimepiride in human plasma has been established using liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI/MS/MS). Glipizide was used as an internal standard. Glimepiride and internal standard in plasma sample was extracted using diethyl etherethyl acetate (1 : 1). A centrifuged upper layer was then evaporated and reconstituted with the mobile phase of acetonitrile-5 mM ammonium acetate (60:40, pH 3.0). The reconstituted samples were injected into a $C_{18}$ reversed-phase column. Using MS/MS in the multiple reaction monitoring (MRM) mode, glimepiride and glipizide were detected without severe interference from human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]$^+$) at m/z 491 and a corresponding product ion at m/z 352. And the internal standard produced a protonated precursor ion ([M+H]]$^+$) at m/z 446 and a corresponding product ion at m/z 321. Detection of glimepiride in human plasma by the LC-ESI/MS/MS method was accurate and precise with a quantitation limit of 0.1 ng/mL. The validation, reproducibility, stability, and recovery of the method were evaluated. The method has been successfully applied to pharmacokinetic studies of glimepiride in human plasma.

• Journal of Powder Materials
• /
• v.17 no.3
• /
• pp.209-215
• /
• 2010

Mesoporous alumina particles were prepared by spray pyrolysis using cetyltrimethyl-ammonium bromide (CTAB) as a structure directing agent and the effect of Al precursor types on the texture properties was studied using $N_2$ adsorption isotherms, small-angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The surface area and the microstructure of alumina particles were significantly influenced by the Al precursor type. The largest BET surface area was obtained when Al chloride was used, whereas alumina particles prepared from Al acetate had the largest pore volume. According to small-angle X-ray scattering (SAXS) analysis, the alumina powders prepared using nitrate and acetate precursors had a clear single SAXS peak around $2{\theta}=1.0{\sim}1.5^{\circ}$, indicating that regular mesopores with sponge-like structure were produced. On the basis of TEM, SAXS, and $N_2$ isotherm results, the chloride precursor was most profitable to obtain the largest surface area ($265\;m^2/g$), whereas, the nitrate precursor is useful for the preparation of non-hollow mesoporous alumina with regular pore size, maintaining high surface area (${\sim}233\;m^2/g$).

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.6
• /
• pp.332-338
• /
• 2017

The purpose of this study was to determine optimum value of aeration, acetate dosage, and $CO_2$ input for the cultivation of Scenedesmus acuminatus. Highest specific growth rate and maximum biomass productivity was obtained by the aeration of 0.72 vvm and lower specific growth rates and maximum biomass productivity were obtained for other aeration tests. When putting 0.3 M of ammonium acetate in JM medium, the highest specific growth rate and maximum biomass productivity were obtained. $CO_2$ input tests were performed during semi-continuous culturing tests. The highest specific growth rate ($0.460d^{-1}$) and maximum biomass productivity ($0.936gL^{-1}d^{-1}$) were obtained after replacing 50% of solution with 0.3 M of acetate solution for $CO_2$ input tests. However, more dilutions after the first dilution resulted in lower specific growth rate and maximum biomass productivity. In aeration tests, the highest specific growth rate ($0.381d^{-1}$) and maximum biomass productivity ($0.253gL^{-1}d^{-1}$) were obtained when cultivating it with JM medium, but the specific growth rate and maximum biomass producitivty were significantly decreased when 50% of solution was replaced by acetate containing solution.

• Microbiology and Biotechnology Letters
• /
• v.24 no.1
• /
• pp.44-49
• /
• 1996

By using the ${\beta}$-tyrosinase of Citrobacter freundii KCT2006, which was cloned and overexpressed in Escherichia coli, 3,4-dihydroxy phenyl-L-alanine (L-DOPA) was synthesized efficiently from pyrocatechol, sodium pyruvate, and ammonium acetate. Optimal temperature and pH for the reaction were determined to be about 18$^{\circ}C$ and 8.5, respectively. The effects of substrate concentrations were also examined at different concentrations of ammonium acetate, sodium pyruvate, and pyrocatechol. Ammoniumacetate and sodium pyruvate increased the reaction rate until the concentrations reached to 300mM and 50mM, respectively. Although pyrocatechol showed the optimal concentration at 20mM, it was controlled between 20mM and 50mM to avoid the depletion of substrate during the enzymatic synthesis. Meanwhile the synthetic rate was improved about 20% when ethanol was included in the reaction solution. Based on above results, a reaction medium for the productin of L-DOPA was prepared and incubated with 1 unit/ml of ${\beta}$-tyrosinase. Pyrocatechol and sodium pyruvate was added to the reaction solutin intermittently to avoid the substrate depletion during the enzymatic reaction. After 24 hour of reaction, 31.6g/l of L-DOPA was accumulated in the reaction solution as soluble and precipitated ones and the conversion yield was about 85.2%.