• Korean Journal of Food Science and Technology
• /
• v.12 no.2
• /
• pp.88-96
• /
• 1980

Reaction conditions in the amino-carbonyl reaction, and the effect of amino acids on the reactivity of amino-carbonyl reaction were investigated. Results obtained are as follows : 1. When the pH of the reaction mixture was increased above the isoelectric point of an amino acid, a significant increase in the color intensity was observed. 2. The color intensity increased gradually up to 1 : 1 of the molar ratio of reactants. This result was interpreted to show that sugar and free amino group combined in 1 : 1 ratio. 3. Amino-carbonyl reaction showed a significant time and temperature-dependences. The activation energy at 0.2 M glucose and 0.2 M glycine system was 37.5 Kcal/mole. 4. Among amino acids tested, glycine, lysine and $\beta$-alanine caused a significant increase in the color intensity, but acidic amino acids showed the least color intensity. The latter was interpreted to show that one of carboxyl groups of acidic amino acid has an inhibiting effect on the reactivity of the amino group. 5. The color intensity of sugars tested was in the order of xylose>arabibose>fructose>glucose>maltose>lactose.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.4
• /
• pp.248-252
• /
• 2009

Purpose: This retrospective study was performed to analyze the relationship between complications of the posterior mandibular single crowns and distance from the adjacent teeth to the implant. Subjects and Methods: Of the patients who presented Ewha Womans University Mokdong Hospital & Yonsei University Dental Hospital with missing of the posterior mandibular molar and restored with implant-supported 18 Single crowns between 1996 thru 2007, 115 patients had been followed after crown delivery. The subjects were divided into complication-followed group and a control without any problems. The distance from the most distal tooth to the implant were measured. The prosthetic & biologic complications were reviewed by the cantilever distance and analyzed by abutment type, age & gender statistically using SAS version 9.1 (SAS Inc., USA). Results and Conclusion The results were as follows; 1) The posterior mandibular single crown with cantilever showed higher incidence of follow-up complications upon logistic analysis (p<0.05). 2) The prosthetic and biologic complications are related with the cantilever distance with 2.1 odds ratio and 3.39 cut-off value of specificity & sensitivity by SPSS 12.0. 3) The complications are neither significant in abutment types nor age & gender.

• Nuclear Engineering and Technology
• /
• v.12 no.1
• /
• pp.19-28
• /
• 1980

An instant labelling technique for lyophilized pyrophosphate with $^{99m}$Tc is described labelling yield of about 90% is obtained at the pH range 3.5-5.5 on reconstitution with sodium pertechnetate-$^{99m}$ Tc solution. The final product is controlled by a modified two dimensional paper chromatography using 85% methanol and 0.85% saline, and biodynamic investigations are performed on white mice. Generally, the less amount of stannous chloride is used. the higher labelling yield is obtained. The molar ratio of pyrophosphate to stannous chloride of 10 : 1 ~ 50 : 1 is sufficient. The more amount of reduced unbound $^{99m}$Tc is injected, the more radioactivity is incorporated in the liver. Thus. the cause of the false bone-imaging is attributable to the presence of reduced unbound $^{99m}$Tc which is known to be well adsorbed to oxidized tin colloidals. The maximum uptake ratio of bone: liver in mice, in weight basis, 35 : 1 is achieved in lime of 60 min. or so. Tile preparation is suitable for clinical investigations on patients with bone diseases.iseases.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.832-842
• /
• 1996

TAME synthesis was studied in a fixed bed reactor with 3 different types of exchanged resins i.e, Amberlyst-15, Amberlyst-15(wet) and Amberlyst XN-1010. Amberlyst-15 has highest activity, presumably due to the higher reaction participation of the inner active sites of gel shape microparticular resin structure. The optimum reaction conditions for TAME synthesis were found as follows ; reaction temperature of $135^{\circ}C$, molar ratio(MeOH/I.A.A) of 1.0~4.0 and W/F of 2.0~4.0 gr.-cat. hr/gr.-mole. The cross-linking bond of styrene divinyl benzene was observed at $2{\theta}=20$ in XRD pattern. The DSC analysis showed that the thermal stability was in order of Amberlyst-15>Amberlyst-15(wet)>Amberlyst XN-1010. The apparent activation energies of TAME synthesis reaction with Amberlyst-15, Amberlyst-15(wet) and Amberlyst XN-1010 were 12.36, 12.46 and 14.72 kcal/mole, respectively.

• Applied Biological Chemistry
• /
• v.29 no.2
• /
• pp.219-226
• /
• 1986

The differences of pigment compositions in leaf chloroplast between sun and shade plant were analyzed to investigate the photo-induced destructive effects on shade species under the strong light. Ginseng was selected as a C-3 shade plant, soybean as C-3 sun species and corn as C-4 malate forming sun species. To study the effects of light, ginseng was divided into two subgroups; the 1 and 2 lines received sunlight a little more than those of 3 and 4 lines. Total amounts of chlorophylls, carotenes and xanthophylls were not considerably different among 3 and 4-lined ginseng, soybean and corn. However, the amounts of the three components of 1 and 2-lined ginseng and the chlorophylls content in corn leaves were smaller than those of others. The molar ratio of lutein to total carotenoids was significantly high in ginseng, that of violaxanthin was considerably high in corn and that of neoxanthin the highest in 1 and 2-lined ginseng among tested samples. Chlorophylls to carotenes ratio was 16.0 and highest in ginseng, 13.2 in soybean and 12.0 in corn. In 1 and 2-lined ginseng, the molar ratios of lutein and carotenes were lower while those of neoxanthin and violaxanthin were higher than those of the samples of more light. It was noticeable that an antheraxanthin-like epoxy carotenoid detected in soybean and corn leaves extracts was not observed in ginseng leaf extract.

• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.683-689
• /
• 2015

In this study, the properties of Ag-coated $TiO_2$ nanoparticles were observed, while varying the molar ratio of water and $Ag^+$ for the surfactant and $TiO_2$. According to the XRD results, each nanoparticle showed a distinctive diffraction pattern. The intensity of the respective peaks and the sizes of the nanoparticles increased in the order of AT1($R_1=5$)(33.3 nm), AT2($R_1=10$)(38.1 nm), AT3($R_1=20$)(45.7 nm), AT4($R_1=40$)(48.6 nm) as well as AT5($R_2=0.2$, $R_3=0.5$)(41.4 nm), AT6($R_2=0.3$, $R_3=1$)(45.1 nm), AT7($R_2=0.5$, $R_3=1.5$)(49.3 nm), AT8($R_2=0.7$, $R_3=2$)(57.2 nm), which values were consistent with the results of the UV-Vis. spectrum. The surface resistance of the conductive pastes fabricated using the prepared Ag-coated $TiO_2$ nanoparticles exhibited a range 7.0~9.0($274{\sim}328{\mu}{\Omega}/cm^2$) times that of pure silver paste(ATP)($52{\mu}{\Omega}/cm^2$).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.203-207
• /
• 2019

Calcium phosphates such as hydroxyapatite (HAp), tricalcium phosphate (${\beta}$-TCP), and biphasic calcium phosphate (BCP, HAp/${\beta}$-TCP) have been prepared via hydrothermal treatment. The synthesis was conducted by reacting ($Ca(OH)_2$) aqueous solution with phosphoric acid ($H_3PO_4$) under different hydrothermal synthesis conditions (temperatures up to $150^{\circ}C$ and pH lower than 12). The effects of initial precursor Ca/P ratio (1.30, 1.50 and 1.67) and post heat treatment on the phase evolution behavior of the powders and sintered ceramics were investigated. The phases of resulting powders and sintered ceramics were controllable by adjusting the initial Ca/P ratio. A single HAp phase without any noticeable second phase was obtained for the initial Ca/P ratio of 1.67 in the overall heat treatment range. Pure ${\beta}$-TCP and biphasic calcium phosphate (HAp/${\beta}$-TCP) were synthesized from precursor solutions having Ca/P molar ratios of 1.30 and 1.50, respectively, after having been heat treated at $900^{\circ}C$ or higher. Dense ceramics with translucency were obtained at considerably lower sintering temperatures.

• Journal of Life Science
• /
• v.19 no.6
• /
• pp.744-750
• /
• 2009

A bacterial strain producing highly viscous extracellular polysaccharide was isolated from soil. Through morphological, physiological and chemotaxonomical studies, it was identified as a Bacillus sp. and named Bacillus sp. PS-12. The extracellular polysaccharide, named PS-12 was purified by ethanol precipitation, cetylpyridinium chloride (CPC) precipitation and gel permeation chromatography. The purified polysaccharide was found to consist of glucose, mannose, galactose, and fucose, with a molar ratio of approximately 7:3.2:2:1, respectively. PS-12 was investigated for its immunostimulating activity on murine macrophage RAW264.7 cells using an ELISA assay. PS-12 stimulated the production of TNF-${\alpha}$ to a level 50 times greater than the control and also induced 1L-6 secretion in a dose-dependent manner. The cytotoxicity on RAW264.7 cells by PS-12 was relatively low with 10% cytotoxicity at 2 ${\mu}g$/ml. These results indicate that PS-12 is less cytotoxic to immune cells and possess immunomodulating activity in which it can produce cytokines including TNF-${\alpha}$ and 1L-6 from macrophages.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.7
• /
• pp.1175-1179
• /
• 2004

Structured lipid (SL) was produced from soybean oil with molar ratio of 1：2：2 (soybean oil：capric acid：CLA) using Chirazyme L-2 lipase (4％ by weight of total substrates). The reaction was conducted for 24 hr at 55$^{\circ}C$ in a 1 L stirred-batch type reactor. SL-soybean oil contained 4.9 mol％ capric acid and 4.1 mol％ CLA, respectively. Iodine value of SL-soybean oil was reduced than that of soybean oil due to the incorporated capric acids. Tocopherol content in SL-soybean oil was 18.2 mg/l00 g. SL-soybean oil appeared more yellowish color than soybean oil. Reverse-phase HPLC showed that SL-triacylglycerol species containing capric acid consisted of about 12.6 area％.

• Korean journal of food and cookery science
• /
• v.11 no.1
• /
• pp.9-12
• /
• 1995

The molar ratio of sterol to phospholipid differed from yeast strains, and the ratio was relatively higher in non-freeze-tolerant yeast strain, S. cerevisiae than freeze-tolerant yeast strains, D$\sub$2-4/ or CFY. Phospholipid composition of these yeast were also investigated. Phosphatidylcholine content was larger among phospholipids in all yeasts. Higher ratio of PC/PE was found in freeze-tolerant yeast than non-freeze-tolerant yeast. Higher proportion of linolein acid(18 : 2) against total fatty acid attached to phospholipid was observed in D$\sub$2-4/ than S. cerevisiae or CFY, and the degree of unsaturation of fatty acid was higher in D$\sub$2-4/ and CFY than in S. cerevisiae. These results suggested that the fluidity of yeast cell membrane was different in yeast strains, which might result in the difference in freeze-injury of yeast at low temperatures.