• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.335-341
• /
• 1997

운전중 노심의 출력변화를 감시하는 노외계측기(Excore Detector)는 노내계측기(Incore Detector)를 통하여 측정되어진 축방향 출력편차(Axial Offset)를 이용하여 교정되고 있다. 노외 계측기의 전류와 축방향출력편차의 선형적인 관계를 가정하여 노내계측기로 최소한 4회 노심출력을 측정한후 최소자승법(Least Square Method)으로 비례상수들을 구하는 기존의 방법을 대신하여, 단순 노외계측기 교정법은 노내계측기로 1회 측정되어진 자료들을 이용하여 계측기 반응상수(Detector Response Factor)를 계산한 후 비례상수를 계산한다. 계측기반응상수는 2차원 중성자수송모델로부터 계산된 weighting factor와 3차원 확산이론으로부터 구한 노심출력을 이용하여 계산된다. 중성자수송계산은 (R-Z)와 (R-$ heta$)모델을 합성하여 3차원 weighting factor를 계산하므로 축방향 영향뿐만 아니라 집합체별 영향을 고려하였다. 또한 노심의 복잡한 구조로 인하여 근사적인 weighting (actor와 노심출력분포의 사용은 노외계측기의 전류와 계측기반응율의 불일치를 초래하며, 이를 해결하는 상수를 소개하여 보다 정확한 교정결과를 얻도록하였다. 이와 같은 방법을 고리 3호기 9, 10주기 전주기와 11주기초에 적용하여 노심의 연소분포, 냉각수의 온도분포, 노심의 연소도, 노심출력준위등에 대한 단순 노외계측기 교정법의 오차를 분석하여 최적의 노외계측기 교정모델을 제시하였다. 2차원 중성자수송모델 합성법에 의한 단순노외계측기 교정법은 2차원 (R-Z) 중성자수송모델보다 개선된 결과와 평균오차 0.179% 최대 오차 0.624%를 보여주고 있다.하면 조사 후의 조직안정성에도 크게 기여할 것으로 기대된다.EX>O가 각각 첨가된 경우, Ar-4vol.%H$_2$ 분위기보다 H$_2$분위기에서 소결했을 때 밀도가 더 높았다. 그러나, 결정립은 $UO_2$와 $UO_2$-Li$_2$O의 경우, 수소분위기에서 소결했을 때, (U,Ce)O$_2$와 (U,Ce)O$_2$-Li$_2$O에서는 Ar-4vol.%H$_2$분위기에서 소결했을 때 더욱 성장하였다.설명해 줄 수 있다. 넷째, 불규칙적이며 종잡기 힘들고 단편적인 것으로만 보이던 중간언어도 일정한 체계 속에서 변화한다는 사실을 알 수 있다. 다섯째, 종전의 오류 분석에서는 지나치게 모국어의 영향만 강조하고 다른 요인들에 대해서는 다분히 추상적인 언급으로 끝났지만 이 분석을 통 해서 배경어, 목표어, 특히 중간규칙의 역할이 괄목할 만한 것임을 가시적으로 관찰할 수 있 다. 이와 같은 오류분석 방법은 학습자의 모국어 및 관련 외국어의 음운규칙만 알면 어느 학습대상 외국어에라도 적용할 수 있는 보편성을 지니는 것으로 사료된다.없다. 그렇다면 겹의문사를 [-wh]의리를 지 닌 의문사의 병렬로 분석할 수 없다. 예를 들어 누구누구를 [주구-이-ν가] [누구누구-이- ν가]로부터 생성되었다고 볼 수 없다. 그러므로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.65-68
• /
• 2000

본 논문에서는 평면상에 존재하는 물체까지의 거리를 카메라시스템을 이용하여 실제 거리를 계측하는 알고기즘을 제안하였다. 계측 시스템을 교정하기 위해, 우선 3차인 실세계 좌표계와 2차원의 카메라 좌표계의 관계를 해석하고, 카메라의 변수들을 포함하는 카메라 좌표계의 변수들을 구하였다. 한편, 3파원 공간에서 계측면을 평면으로 가정하고 평면의 방정식과 좌표계 변환 방정식으로부터 뉴턴-랩슨법을 이용하여 최소값에 대응하는 근사치를 구함으로써 물체까지의 거리 정보를 추출하였다. 실제의 계측 실험에서, 도로에 표준 물체인 Ca]ibration 시트를 두고 승용차의 백미러 위치에 카메라를 설치하고 영상을 획득하였다. 계측 거리는 4m부터 lOm까지는 1m간격으로 계측하고, 10m부터 30m까지는 10m간격으로 계측하였다. 그 결과 4m에서는 약 1.4mm의 오차가 발생하였고, 30m의 거리에서는 3.5m의 오차를 보였는데 계측 거리가 길어질수록 오차가 지수함수적으로 증가함을 알 수 있었다.

• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.78-92
• /
• 2003

The upper-body characteristics of the right-handed and the left-handed are examined and compared through 1-dimensional measurement and 2-dimensional measurement. The results were as follows: 1. According to 1-dimensional measurement results, the clearest differences were seen in girth items rather than height or length items. In particular, hand girth, lower arm girth, and upper arm girth were bigger on the left side in the left-handed group and the right side in the right-handed group. This is thought to be relevant to the arm muscles frequently used. 2. According to 2-dimensional measurement results, significant differences appeared in the females of the left-handed group: shoulder point among width items. In the right-handed group, some differences of significance were shown in females (shoulder point, rear armpit point, and B.P. point among width items) and males (front neck point among extreme vertical distance items). In summary, the body type characteristics of the left-handed and the right-handed reveal great differences in the items related to arm length and arm girth. In other words, the sleeve and shoulder patterns production based on the right-handed don't rightly reflect the somatotype characteristics of the left-handed. In addition, in the cases of athletes, laborers, and the disabled who frequently use particular muscles or parts of the body, this sort of research in the patterns is consistently needed in order to reflect the size differences in girth items in upper body.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.2
• /
• pp.174-188
• /
• 1999

The purpose of this study is to evaluate the precision and accuracy of a three dimensional cephalogram constructed by using the frontal and lateral cephalogram of twelve human dry skulls. After achieving the three dimensional image reconstruction program, we tried to apply this program to two dentofacial deformity patients. 1. Conventional nasion relator in cephalostat was used to reproduce the same head position for the same dry skull. The mean difference of the three dimensional cephalogram for the same dry skull was $0.34{\pm}0.33mm$. Closeness of repeated measures to each skull reveals the precision of this method for the three dimensional cephalogram. 2. Concerning the accuracy, the mean difference between the three dimensional reconstruction data and actual lineal measurements was $1.47{\pm}1.45mm$ and the mean magnification ratio was $100.24{\pm}4.68%$. This Diffrerence is attributed mainly to the ill defined cephalometric landmarks, not to the positional change of the dry skull. 3. Cephalometric measurement of lateral and frontal radiographs had no consecutive magnification ratio because of the different focus-object distance. The mean difference between the frontal and lateral cephalogram to the actual lineal measurements was $4.72{\pm}2.01mm$ and $-5.22{\pm}3.36mm$. Vertical measurements were slightly more accurate than horizontal measurements. 4. Applying to the actual patient analysis, it is recommendable to use this program for analyzing the asymmetry or spatial change after operation. The orthodontic bracket would be a favorable cephalometric landmark for constructing the three dimensional images.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.6
• /
• pp.50-56
• /
• 1997

As the purpose of the breakdown prediction of three degradation of insulating materials caused by partial discharge occurring at various defects in the polymer insulator itself and at the interfaces between electrodes and the insulating materials. Treeing due to partial discharge os one of the main causes of breakdown of the insulating materials. Recently, the necessity of establishing the way to diagnoses the aging of insulation materials and to predict of insulation breakdown become improtant. The purpose of our work are to use acoustic emission System and fractal dimension and to investigated the treeing phenomena in polymeric insulation under appliec AC voltage 11[kV] with an artificial needleshaped void(1.5[mm]) using the above system.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.543-552
• /
• 2000

The purposes of this study were to evaluate the reproducibility of posteroanterior(PA) cephalograms obtained by two methods, the Head Posture Aligner(HPA) method in natural head posture and the conventional method(operator-guided method), and to compare the vertical rotational differences of the head Posture between lateral and PA cephalograms according to the method. The sample was consisted of 30 adults. At first day, a PA cephalogram and a lateral cephalogram were obtained from each subject by two methods to investigate the difference of vertical rotational posture between lateral and PA cephalograms. Two weeks later, another PA cephalogram was obtained using each method to evaluate the reproducibility of head posture. Five height measurements and nine width measurements were used in the paired t-test to compare the reproducibility of the PA cephalometric measurements between two methods. The differences of vertical rotational posture between lateral and PA cephalograms were calculated from a computer program and compared according to the method used, and following results were obtained. 1. Height measurements obtained by operator-guided method showed significant differences according to the time interval and revealed low reproducibility. 2. Height measurements obtained by HPA method did not show significant differences according to the time interval and presented high reproducibility. 3. In the comparison of width measurement, two methods did not show distinct differences in reproducibility. 4. The difference of vertical rotational posture between lateral and PA cephalograms showed $0.8^{\circ}$ in the HPA method, more less than $2.5^{\circ}$ in the operator-guided method. The results of the present study suggest that the HPA may be helpful in the PA cephalometric radiography in terms of reproducibility.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.313-325
• /
• 2002

Three-dimensional CT imaging is efficient in examining specific structures in the craniofacial area by reproducing actual measurements through minimization of errors from patient movement and image magnification. Due to the rapid development of digital image technology and the expansion of treatment range a need for developing three -dimensional analysis has become urgent. Therefore the purpose of this study was to evaluate the percentage of error and magnification of three-dimensional CT using a dried skull and Vworks $program^{TM}$ (Cybermed Inc., Seoul, Korea) and also to obtain landmarks that are easy to designate and reproduce in three-dimensional images using the Vmorph-proto $program^{TM}$ (Cybermed Inc., Seoul, Korea). The following conclusions were obtained, 1. In the comparison of actual measurements from the dried skull and the three-dimensional image obtained from the Vworks program, the mean error was 0.99mm and the magnification was 1.04%. 2. Clinically useful hard tissue landmarks from three-dimensional images were Supraorbitale, Lateral orbital margin, Infraorbitale, Nasion, ANS, A point, Zygomaticomaxilla, Upper incisor, Lower incisor, B point, pogonion, Menton, PNS, Condylar inner margin, Condylar outer margin, Porion, Condylion, Gonionl, Gonion2, Gonion3, Sigmoid notch and Basion. 3. Clinically useful soft tissue landmarks from three-dimensional images were Endocanthion, Exocanthion, Soft tissue Nasion, Pronasale, Alare lateralis, Upper nostril point, Lower nostril point, Subnasale, Upper lip point, Cheilion, Stomion, Lower lip center, Soft tissue B, Pogonion, Menton and Preaurale. The Vworks program can be considered a clinically efficient tool to produce and measure three-dimensional images. Most of the hard and soft tissue landmarks proposed above are anatomically important points which are also easily reproducible and designated. These landmarks can be beneficial in three-dimensional diagnosis and the prediction of changes before and after surgery.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.18-18
• /
• 2022

하천 합류부에 있어 수체의 혼합양상을 분석은 고해상도의 자료가 필요하다. 반면에 수질환경 문제와 기존 모니터링 시스템이 고정된 측정 방식으로 이루어지기 때문에 하천 전체의 정보는 저해상도의 결과값은 나타낸다. 또한, 많은 수중 환경 문제가 1차원에서 3차원에 걸쳐 있지만, 대부분의 관측 시스템은 1차원에 머물러 있음을 확인할 수 있다. 이러한 문제를 해결하기 위해서는 보다 발전된 관찰 및 계측이 필요하다. 그에 따른 고해상도의 측정 자료를 얻기 위해서는 측정자가부담을 많이 가지며, 측정할 수 있는 영역이나 시간적으로 제한적이다. 해상도는 낮추되 광범위한 데이터를 취득하기 위해서는 적절한 보간법이 선정되어야 한다. 관련 논문을 검토한 결과, 측정 결과에 따른 2차원 횡단면 분포의 내용이 지배적이었고, 3차원 매핑 및 3차원 분석을 통한 수리학적 정보 획득에 관한 연구는 부족한 실정이였다. 특히 3차원 하천 수질 농도의 연구가 불충분했다. 그에 따라 저해상도 측정결과에서의 예측과 보간법에 대한 시각화를 통해 하천의 전체적인 수리·수질정보를 표기하였다. 각각의 보간법을 비교함으로써 하천 매핑에 있어 IDW, Natual Neighbor, Kriging 기법을 적용하여 시각화된 자료와 정량적 평가를 통해 하천매핑의 정밀성을 향상시켰다. 이를 통해 3차원화된 공간보간 자료를 이용한 하천합류부의 혼합양상을 해석하였다. 3차원 데이터를 활용하는 방법으로 측정 및 모니터링 기술의 중요한 데이터로 활용되며, 이러한 데이터는 유해물질 저감 기술 및 평가 예측 기술의 기초 데이터로 활용되고 있다. 유해화학물질 추정, 호수의 고위험 조류군 계층분석 등 다양한 수생건강 진단기술을 활용할 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.36-42
• /
• 1997

This paper purposes the measurement method of vibration intensity in building structure which is a method of measuring the intensity and the flow of vibration energy. We derived basic theory and measuring theory for a simple beam, and comparison of the experimental results with calculated results. As a result, according to the calculated value from acceleration distribution and the measurement result from the method of vibration intensity under the condition except near field of measurement zone. The measured results, show that this method is useful for measuring the vibration energy flow in building structure.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.523-530
• /
• 2017

Laser-Induced Breakdown Spectroscopy (LIBS) which a plasma is irradiated at a specific wavelength depending on the material when a high-energy laser is irradiated, and a Raman spectroscopy which measures rotation and vibration in molecules as light-scattering phenomenon occurs, are attracting attention as a space exploration technology because of the advantages of high accuracy and real-time analysis, and the ability to perform long-range detection. In this study, the tendency of the laser spectrum according to the change of the soil component was analyzed by laser spectroscopy and the two - dimensional chemical distribution was conducted based on the trend of laser spectrum. We have also established the environment of Mars (4-7 torr) and lunar atmosphere (<1 torr) in experimental setup, to prove that it is possible to measure by difference of soil chemical composition using LIBS and Raman spectroscopy even in artificial space environment.