• 제목/요약/키워드: 1/3 frequency band

검색결과 1,272건 처리시간 0.029초

Ka대역 위성지구국과 지상무선국간의 공유 기준 (Sharing Criteria between Satellite network and Earth Station in Ka-and)

  • 홍완표
    • 한국전자통신학회논문지
    • /
    • 제5권3호
    • /
    • pp.327-331
    • /
    • 2010
  • 세계주파수분배 지역1과 지역3에서 주파수대역 21.4-22.0 GHz가 방송위성서비스로 사용되고 있다. 이 주파수대역의 사용은 WRC-03의 결의 525의 규정에 따른 것으로 이 주파수대역에 대한 방송위성서비스 시스템은 광대역 무선주파수신호를 전송한다. 전세계적으로 이 주파수대역을 사용하고자 하는 위성발사계획이 증가하고 있는 추세이다. 이 주파수대역은 강우감쇠가 매우 심한 대역으로 Ku대역에 비하여 상당히 큰 송신전력이 요구된다. 이 주파수대역에서 방송서비스가 운용되기 위하여, 이에 적합한 공유기준이 요구된다. 본 논문은 국제전기통신연합의 권고를 토대로 위성지구국과 지상무선국 신호간의 공유기준에 대하여 분석하였다.

A D-Band Integrated Signal Source Based on SiGe 0.18μm BiCMOS Technology

  • Jung, Seungyoon;Yun, Jongwon;Rieh, Jae-Sung
    • Journal of electromagnetic engineering and science
    • /
    • 제15권4호
    • /
    • pp.232-238
    • /
    • 2015
  • This work describes the development of a D-band (110-170 GHz) signal source based on a SiGe BiCMOS technology. This D-band signal source consists of a V-band (50-75 GHz) oscillator, a V-band amplifier, and a D-band frequency doubler. The V-band signal from the oscillator is amplified for power boost, and then the frequency is doubled for D-band signal generation. The V-band oscillator showed an output power of 2.7 dBm at 67.3 GHz. Including a buffer stage, it had a DC power consumption of 145 mW. The peak gain of the V-band amplifier was 10.9 dB, which was achieved at 64.0 GHz and consumed 110 mW of DC power. The active frequency doubler consumed 60 mW for D-band signal generation. The integrated D-band source exhibited a measured output oscillation frequency of 133.2 GHz with an output power of 3.1 dBm and a phase noise of -107.2 dBc/Hz at 10 MHz offset. The chip size is $900{\times}1,890{\mu}m^2$, including RF and DC pads.

A Simple Dual Band Filter Design with 0603 Case Size using IPD Technology for 1.8 GHz and 2.5 GHz DC-block Application

  • Li, De-Zhong;Wang, Cong;Kyung, Gear Inpyo;Kim, Nam-Young
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.385-386
    • /
    • 2008
  • In this paper, a simple dual band filter chip is designed with 0603 case size using IPD technology. The dual-band filter achieves high frequency band at 2.5 GHz and low frequency band at 1.8 GHz. The insertion losses in high frequency band and low frequency band are -0.195 dB and -0.146 dB, respectively. The return losses in these bands are -22.7 dB and -22.8 dB, respectively. The simple dual-band filter based on SI-GaAs substrate is designed within die size of about 1.3 $mm^2$.

  • PDF

가변 핵심 대역 하향 표본화 비를 가진 MPEG USAC 성능 평가 (A Performance Evaluation of the MPEG USAC with Variable Core-Band Down-Sampling Ratio)

  • 이재화;김인철
    • 방송공학회논문지
    • /
    • 제18권1호
    • /
    • pp.106-114
    • /
    • 2013
  • 본 논문에서는 내부 표본화 주파수와 핵심 대역 하향 표본화 비의 조정이 MPEG USAC의 전체 성능에 끼치는 영향을 다룬다. 여기서 내부 표본화 주파수는 실제 부호화될 때의 내부적인 표본화 주파수를 말한다. 핵심 대역 하향 표본화 비는 전체 부호화 대역폭에 대한 핵심 대역폭의 비를 나타낸다. 성능은 6개의 실험 음원에 대해 10명이 참가한 MUSHRA 검사를 통해 평가되었다. 실험에서는 기존의 1/2에 비해 1/3 혹은 1/4의 핵심 대역 하향 표본화 비를 사용하면 저전송률에서 부호화 성능을 향상시킬 수 있음을 보였다.

1.7GHz 대역 국내 디지털 코드리스폰 도입을 위한 주파수 간섭 분석 (Analysis of 1.7GHz Frequency Interference for Domestic Digital Cordless Phone)

  • 김종호;강건환;박덕규
    • 한국콘텐츠학회논문지
    • /
    • 제7권3호
    • /
    • pp.60-67
    • /
    • 2007
  • 본 연구에서는 디지털 코드리스폰(DCP)에 대한 현재 각국의 동향과 주파수 분배대역을 연구 분석하였다. 그 결과 국내 도입 가능한 후보주파수대역으로 1.7GHz와 2.4GHz대역을 제안하였다. 제안된 1.7GHz는 유럽의 DECT시스템이 도입될 것으로 예상되고 있어, 인접대역인 IMT-2000 후보주파수 대역간의 간섭분석이 필요하다. 본 논문에서는 1.7GHz대역과 IMT-2000 후보 주파수대역간의 간섭분석을 실시하여, 1.7GHz대역의 채널배치를 제안하였다.

ITU-R의 이동위성업무 주파수 공유 연구 현황 (ITU-R Study on Frequency Sharing for Mobile Satellite Services)

  • 구본준;오대섭
    • 전자통신동향분석
    • /
    • 제38권1호
    • /
    • pp.55-64
    • /
    • 2023
  • Recently, preparations for 6G have led to the increasing interest in integrated or hybrid communication networks considering low-orbit satellite communication networks with terrestrial mobile communication networks. In addition, the demand for frequency allocation for new mobile services from low-orbit small satellites to provide global internet of things (IoT) services is increasing. The operation of such satellites and terrestrial mobile communication networks may inevitably cause interference in adjacent bands and the same band frequency between satellites and terrestrial systems. Focusing on the results of the recent ITU-R WP4C meeting, this study introduces the current status of frequency sharing and interference issues between satellites and terrestrial systems, and frequency allocation issues for new mobile satellite operations. Coexistence and compatibility studies with terrestrial IMT in L band and 2.6 GHz band, operated by Inmassat and India, respectively, and a new frequency allocation study (WRC-23 AI 1.18) are carried out to reflect satellite IoT demand. For the L band, technical requirements have been developed for emission from IMT devices at 1,492 MHz to 1,518 MHz to bands above 1,518 MHz. Related studies in the 2 GHz and 2.6 GHz bands are not discussed due to lack of contributions at the recent meeting. In particular, concerning the WRC-23 agenda 1.18 study on the new frequency allocation method of narrowband mobile satellite work in the Region 1 candidate band 2,010 MHz to 2,025 MHz, Region 2 candidate bands 1,695 MHz to 1,710 MHz, 3,300 MHz to 3,315 MHz, and 3,385 MHz to 3,400 MHz, ITU-R results show no new frequency allocation to narrow mobile satellite services. Given the expected various collaborations between satellites and the terrestrial component are in the future, interference issues between terrestrial IMT and mobile satellite services are similarly expected to continuously increase. Therefore, participation in related studies at ITU-R WP4C and active response to protect terrestrial IMT are necessary to protect domestic radio resources and secure additional frequencies reflecting satellite service use plans.

주파수 3체배기를 이용한 W 밴드 주파수 합성기 설계 (Design of W Band Frequency Synthesizer Using Frequency Tripler)

  • 조형준;;김성균;김병성
    • 한국전자파학회논문지
    • /
    • 제24권10호
    • /
    • pp.971-978
    • /
    • 2013
  • 본 논문에서는 65 nm RF CMOS 공정을 이용하여 26 GHz 위상 고정 루프(PLL)를 설계하고, 주파수 3체배기(tripler)를 이용하여 W 밴드 주파수 합성기를 설계하였다. 26 GHz VCO는 22.8~26.8 GHz, 3체배기의 출력은 74~75.6 GHz의 주파수 조정 범위를 갖는다. 제작한 주파수 합성기는 총 75.6 mW의 전력을 소모하며, 3체배기의 최종 출력은 1 MHz 오프셋에서 -75 dBc/Hz, 10 MHz 오프셋에서 -101 dBc/Hz의 위상 잡음 특성을 갖는다.

WiBro 망을 이용한 2.5/3.5/5.5 GHz m-WiMAX 시스템 무선 측정용 주파수 변환기 개발 (Development of Frequency Converter for 2.5/3.5/5.5 GHz m-WiMAX System Wireless Measurement using WiBro Network)

  • 김세환;전국진
    • 대한전자공학회논문지TC
    • /
    • 제48권2호
    • /
    • pp.1-5
    • /
    • 2011
  • WiBro 망을 이용한 쿼드 밴드 모듈 시스템을 측정하기 위해서 주파수 변환기를 개발했다. 제작된 주파수 변환기의 크기는 $3.1cm{\times}3.1cm{\times}0.4cm$이다. 주파수 변환기 수신부의 잡음 지수는 2.62~3.45 dB였으며, EVM은 -37.5~-34.5 dB로 측정되었다. 그리고 송신부의 EVM은 -42.5~-35.5 dB로 측정되었다. 개발된 주파수 변환기와 함께 쿼드 밴드 모듈을 제작하였고, 2.3 GHz 와이브로 망에서 쿼드 밴드 모듈을 테스트한 결과, 2.5 GHz, 3.5 GHz, 5.5 GHz 대역에서 원활한 인터넷 연결이 가능했다.

Pseudo-Combline을 이용한 이중대역 협대역 대역통과 여파기 (Narrow Band-pass Filter with Dual-band Using Pseudo-Combline)

  • 윤기철;이현욱;이맹;이재영;이종철
    • 한국ITS학회 논문지
    • /
    • 제10권6호
    • /
    • pp.84-90
    • /
    • 2011
  • 본 논문은 이중대역 Pseudo-combline 협대역 대역통과 여파기를 제안한다. 제안한 이중대역 대역통과 여파기의 특징은 개방형 공진 스터브를 사용하고 있으며 ITS와 X-밴드 위성 시스템에 적용이 가능하다. 이중대역 대역통과 여파기는 첫번째 운용 주파수 대역의 중심 주파수 5.8 GHz 그리고 대역폭 3.6 %에서 삽입 및 반사 손실이 각각 1.72 dB 및 15.5 dB 이다. 또한 두 번째 운용 주파수 대역의 중심 주파수 8.5 GHz 그리고 대역폭 3%에서 삽입 및 반사 손실은 각각 1.92 dB 및 16.3 dB 이다.

FORECASTING OF FINANCIAL TIME SERIES BY A DIGITAL FILTER AND A NEURAL NETWORK

  • Saito, Susumu;Kanda, Shintaro
    • 한국시뮬레이션학회:학술대회논문집
    • /
    • 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
    • /
    • pp.313-317
    • /
    • 2001
  • The approach to predict time series without neglecting the fluctuation in a short period is tried by using a digital FIR filter and a neural network. The differential waveform of the Nikkei average closing price is filtered by the FIR band-pass filter of 101 length. It is filtered into the five frequency bands of 0-1Hz, 1-2Hz, 2-3Hz, 3-4Hz and 4-5Hz by setting the sampling frequency 10Hz. The each filtered waveform is learned and forecasted by the neural network. The neural network of the back propagation method is adopted in the learning the waveform. By inputting the data of 20 days in the past, the prediction of 10 days ahead is carried out. After learning the time series of each frequency band by the neural network, the predicted data far each frequency band are obtained. The predicted waveforms of each frequency band are synthesized to obtain a final forecast. The waveform can be forecasted well as a whole.

  • PDF