• 제목/요약/키워드: 0.9 V to 5 V

검색결과 2,836건 처리시간 0.076초

국내 양식 뱀장어 (Anguilla japonica)에서의 주요 영양학적 성분의 평가 (Evaluation of Major Nutrients of Domestic Farmed Eels Anguilla japonica)

  • 조혜선;최종환;고홍범;서재성;안준철
    • 한국수산과학회지
    • /
    • 제44권3호
    • /
    • pp.237-242
    • /
    • 2011
  • To evaluate the proximate composition and main nutritive ingredients (vitamin A, $V_A$; vitamin E, $V_E$; cholesterol; the composition of fatty acids) between eels cultured in different domestic eel farms, we analyzed edible parts of eels that were cultured in three "Water Recirculation System (WRS)" farms and three "Still-Water System (SWS)" farms. We found differences in crude protein, crude lipids and the ash content of eel meat between the farms, but water content showed no significant difference. $V_A$ and $V_E$ contents did not show meaningful differences between the two culture methods, but there was a noticeable distinction between the eel farms. In particular, $V_E$ content showed significant differences between the eels of each farm (highest farm, about 25 mg/100 g dry wt; lowest farm, about 1 mg/100 g dry wt). The fatty acids of cultured eels were composed of monoenes (MUFA, 55-60%), saturates (SFA, 30-33%), $\omega$-6 highly unsaturates (HUFA, 1.6-2%) and $\omega$-3 HUFA (8-9.2%). The MUFA content of WRS eels ($59.9{\pm}1.97%$) was higher than that of SWS eels ($55.8{\pm}0.48%$). The contents of other fatty acids were higher in SWS eels (SFA, $33.0{\pm}0.52%$; $\omega$-6FUFA, $1.98{\pm}0.2%$; $\omega$-3 HUFA, $9.2{\pm}0.67%$) than in WRS eels (SFA, $30.5{\pm}1.34%$; $\omega$-6 HUFA, $1.62{\pm}0.19%$; $\omega$-3 HUFA, $8.0{\pm}0.5%$).

전자선 치료의 선량 측정 QA를 위한 PbI2 선량계 적용 연구 (A Study on the Application of PbI2 Dosimetry for QA in the Electron Beam Therapy)

  • 양승우;한무재;정재훈;최윤선;조흥래;박성광
    • 한국방사선학회논문지
    • /
    • 제14권5호
    • /
    • pp.517-522
    • /
    • 2020
  • 전자선은 선량분포에 영향을 주는 인자가 많아 동일 설정이라도 사용 장비마다 그 특성을 파악하여 방사선 치료에 이용해야 하며, 체내 구조물에 영향이 민감하여 종양에 균일한 선량분포를 조사하기가 까다롭다. 본 연구에서는 광도전체인 PbI2를 사용하여 선량계를 제작하였고, 선형가속기에서 6, 9, 12 MeV 전자선에 대한 전기적 특성을 분석하였다. 재현성 평가결과, RSD는 6, 9, 12 MeV 에너지에서 각각 1.1215%, 1.0160%, 0.5137%로 나타나 출력 신호가 안정적인 것을 나타내었다. 선형성 평가결과, 직선형 추세선의 신뢰도 지표 R2값은 6, 9, 12 MeV에서 각각 0.9999, 0.9999, 0.9994로 나타나 선량이 증가함에 따라 PbI2에 출력 신호가 비례한 것을 확인할 수 있었다. 본 연구의 PbI2 선량계는 전자선 측정 적용가능성이 매우 높은 것으로 판단되며, 광도전체 물질을 통한 전자선 선량계의 기초연구로 활용될 수 있을 것으로 사료된다.

비드와 나선형 공진기를 이용한 전원 노이즈 저감 방안 연구 (Power Noise Suppression Methods Using Bead with Spiral Resonator)

  • 정동호;강희도;육종관
    • 한국전자파학회논문지
    • /
    • 제24권2호
    • /
    • pp.152-160
    • /
    • 2013
  • 본 연구에서는 동시 스위칭에 의한 잡음 저감을 위하여 일반적으로 사용하는 비드와 더불어 나선형 공진기를 함께 사용하여 보다 향상된 광대역의 잡음 저감 특성을 확보하였다. 비드는 기본체배 주파수 아래 대역인 0.8 GHz 이내에서 효과적으로 잡음이 저감되고, 공진기는 공진기 턴 길이에 반비례한 공진 주파수 이내까지 잡음을 잘 저감할 수 있었다. 이것을 바탕으로 비드와 공진기를 함께 사용하면 각 주파수 영역에서 임피던스가 높은 성분에 의하여 영향을 받아 보다 광대역의 동시 스위칭에 의한 잡음 저감 특성을 얻을 수 있다. 22 nH 비드만을 사용한 경우 1, 2, 3, 그리고 4체배에서 각각 4.8, 2.0, 0, 0.6 dB의 노이즈 저감 특성을 얻었으나, 22 nH의 비드와 3턴 공진기를 함께 사용할 경우 9.5, 8.3, 6.1, 9.9 dB의 광대역에 걸친 잡음 감소 특성을 얻을 수 있었다. 비드가 없는 경우와 비교하여 22 nH 비드를 사용하면 전원단 흔들림이 76 mV에서 56 mV로 감소하고, 비드와 3턴 공진기를 함께 사용하면 34 mV로 감소함을 볼 수 있다. 즉, 비드와 공진기를 동시에 사용함으로써 보다 광대역의 동시 스위칭에 의한 잡음 저감 특성을 확보함을 보였다.

분위기 열처리가 Ca-doped Y $CrO_3$의 전기적 특성에 미치는 영향 (Effects of Atmospheric Annealing on the Densification and Electrical properties of Ca-doped $CrO_3$)

  • 하우종;문종하;이병택;박현수
    • 한국재료학회지
    • /
    • 제10권8호
    • /
    • pp.540-544
    • /
    • 2000
  • 열처리가 분위기 Y(sub)0.7Ca(sub)0.3CrO(sub)3<원문참조>의 치밀화 및 전기적 특서에 미치는 영향을 조사하였다. 1700$^{\circ}C$ 공기중에서 12시간 소결된 시편을 1400$^{\circ}C$ O$_2$, Air, N$_2$에서 시간의 변화에 따라 재열처리하였다. N$_2$분위기에서 열처리한 Y(sub)0.7Ca(sub)0.3CrO(sub)3<원문참조>의 밀도는 열처리 시간이 증가함에 따라 다음과 같이 변화하였다. 4.5(0hr)\longrightarrow5.35(24hrs)\longrightarrow5.1g/$cm^3$(48hrs). 전기전도도는 열처리 시간이 증가함에 따라 큰변화는 없었으며, 활성화 에너지는 0.16eV로 일정하였다. Air에서 재열처리한 경우 밀도는 거의 변하지 않았으나, 활성화 에너지는 시간에 따라 0.19에서 0.115eV까지 변화하였다. O$_2$분위기에서 열철한 Y(sub)0.7Ca(sub)0.3CrO(sub)3<원문참조>의 밀도는 24시간 열처리후 4.9(g/$cm^3$)로 증가후 일정하였다. 24시간 이상 N 분위기에서 열처리한 경우와는 다르게 기지상과 비슷한 조성의 제 2상의 석출되었으며 24시간동안 열처리한 시편까지는 전기 전도도에 변화가 없었다. 그러나 48시간 동안 열처리된 시편의 전기 전도도는 감소하였고 활성화 에너지는 400K이하에서 0.167eV, 400K 이상에서 0.24eV이었다.

  • PDF

Pharmacokinetic profiles of levofloxacin after intravenous, intramuscular and subcutaneous administration to rabbits (Oryctolagus cuniculus)

  • Sitovs, Andrejs;Voiko, Laura;Kustovs, Dmitrijs;Kovalcuka, Liga;Bandere, Dace;Purvina, Santa;Giorgi, Mario
    • Journal of Veterinary Science
    • /
    • 제21권2호
    • /
    • pp.32.1-32.13
    • /
    • 2020
  • Levofloxacin pharmacokinetic profiles were evaluated in 6 healthy female rabbits after intravenous (I/V), intramuscular (I/M), or subcutaneous (S/C) administration routes at a single dose of 5 mg/kg in a 3 × 3 cross-over study. Plasma levofloxacin concentrations were detected using a validated Ultra Performance Liquid Chromatography method with a fluorescence detector. Levofloxacin was quantifiable up to 10 h post-drug administration. Mean AUC0-last values of 9.03 ± 2.66, 9.07 ± 1.80, and 9.28 ± 1.56 mg/h*L were obtained via I/V, I/M, and S/C, respectively. Plasma clearance was 0.6 mL/g*h after I/V administration. Peak plasma concentrations using the I/M and S/C routes were 3.33 ± 0.39 and 2.91 ± 0.56 ㎍/mL. Bioavailability values, after extravascular administration were complete, - 105% ± 27% (I/M) and 118% ± 40% (S/C). Average extraction ratio of levofloxacin after I/V administration was 7%. Additionally, levofloxacin administration effects on tear production and osmolarity were evaluated. Tear osmolarity decreased within 48 h post-drug administration. All 3 levofloxacin administration routes produced similar pharmacokinetic profiles. The studied dose is unlikely to be effective in rabbits; however, it was calculated that a daily dose of 29 mg/kg appears effective for I/V administration for pathogens with MIC < 0.5 ㎍/mL.

PET/CT 검사 시 CT 피폭선량 감소 방법들의 최적화 평가 (Evaluation for Optimization of CT Dose Reduction Methods in PET/CT)

  • 도용호;이홍재;김진의
    • 핵의학기술
    • /
    • 제19권2호
    • /
    • pp.55-62
    • /
    • 2015
  • PET/CT 검사 시 피폭 선량 감소를 위한 방법들이 지속적으로 개발되고 있다. 본 논문에서는 사용자에 의해 parameter 변경이 가능한 3가지 방법인 automatic exposure control(AEC), automated dose-optimized selection of X-ray tube voltage(CAREkV), sinogram affirmed iterative reconstruction(SAFIRE) 적용 시 각 방법의 적용 시와 3가지 방법의 조합에 따른 피폭선량 감소효과와 영상의 질 그리고 SUV 변화 유무를 평가하였다. Bograph mCT64 (Siemens, Germany)장비를 사용하여 anthropomorphic head, chest, pelvis phantom을 torso 모형으로 접합하여 스캔하였다. 120 kV, 40 mAs 조건으로 AEC의 적용 유무와 120 kV, 40 mAs AEC 조건으로 CAREkV의 적용 유무에 따른 피폭 선량 감소 효과를 평가 하였다. 120 kV, 25 mAs SAFIRE 조건에서 영상을 획득하여 120 kV, 40 mAs SAFIRE 미적용 시 대비 노이즈와 피폭선량 감소효과가 평가되었다. 120 kV, 40 mAs AEC 적용, 120 kV, 25 mAs 3가지 방법의 조합 조건으로 AAPM perfomance, anthropomorphic, IEC body phantom을 스캔하여 노이즈, 공간 분해능, 피폭선량 감소효과 그리고 PET SUV의 변화 유무를 평가하였다. AEC 적용 시, 미적용 대비 CTDIvol 50.52%, DLP 50.62% 감소하였다. CAREkV 적용 시 100 kV가 적용됨에 따라 mAs가 61.5% 증가하였으나 CTDI 6.2%, DLP 5.5% 감소하였다. Reference mAs를 낮게 지정할수록, strength값을 높게 지정할수록 피폭선량 감소 효과는 증가하였다. SAFIRE의 경우 40 mAs에서 25 mAs로 tube current를 37.5% 감소시켰음에도 불구하고 mean SD 2.2%, DLP 38% 감소하였다. AAPM phantom에서는 3가지 방법의 조합 시 AEC 대비 SD는 5.17% 감소하였으며 공간 분해능의 경우 유의한 차이가 없었다. Torso phantom의 경우 3가지 조합에서 AEC 대비 mean SD 6.7% 증가, DLP 36.9% 감소하였으며 IEC phantom 실험에서 PET SUV는 통계적으로 유의한 차이가 없었다(P>0.05). 본 논문에서 CT선량 감소를 위한 각 방법들 모두 피폭 선량 감소 효과를 보였으며 3가지 방법의 조합을 통하여 화질 저하와 PET SUV 변화 없이 AEC만 적용 시 대비 36.9%의 선량감소 효과가 있는 것으로 나타났다. 선량 감소 방법들의 최적화를 통하여 환자 피폭선량 저감화를 위한 지속적인 노력이 필요하며 특히 방사선 감수성이 높은 소아 환자에 적극적으로 적용되어야 할 것으로 사료된다.

  • PDF

Dynamic-Voltage/Frequency-Scaling 알고리즘에서의 다중 인가 전압 조절 시스템 용 High-speed CMOS Level-Up/Down Shifter (A Novel High-speed CMOS Level-Up/Down Shifter Design for Dynamic-Voltage/Frequency-Scaling Algorithm)

  • 임지훈;하종찬;위재경;문규
    • 대한전자공학회논문지SD
    • /
    • 제43권6호
    • /
    • pp.9-17
    • /
    • 2006
  • SoC(System-On-Chip) 시스템에서 초 저전력 시스템을 구현하기 위한 dynamic voltage and frequency scaling (DVFS)알고리즘에 사용될 시스템 버스의 다중 코어 전압 레벨을 생성해주는 새로운 다계층(multi-level) 코어 전압용 high-speed level up/down Shifter 회로를 제안한다. 이 회로는 내부 회로군과 외부 회로군 사이에서 서로 다른 전압레벨을 조정 접속하는 I/O용 level up/down shifter interface 회로로도 동시에 사용된다. 제안하는 회로는 인터페이스 접속에서 불가피하게 발생하는 속도감쇄와 Duty Ratio 불안정 문제를 최소화하는 장점을 갖고 있다. 본 회로는 500MHz의 입력 주파수에서 $0.6V\sim1.6V$의 다중 코어 전압을 각 IP들에서 사용되는 전압레벨로, 또는 그 반대의 동작으로 서로 Up/Down 하도록 설계하였다 그리고 제안하는 I/O 용 회로의 level up shifter는 500MHz의 입력 주파수에서 내부 코어 용 level up shifter의 출력전압인 1.6V를 I/O 전압인 1.8V, 2.5V, 3.3V로 전압레벨을 상승 하도록 설계하였으며, level down shifter는 반대의 동작으로 1Ghz의 입력 주파수에서 동작하도록 설계하였다. 시뮬레이션 및 결과는 $0.35{\mu}m$ CMOS Process, $0.13{\mu}m$ IBM CMOS Process 와 65nm CMOS model 변수를 이용한 Hspice를 통하여 검증하였다. 또한, 제안하는 회로의 지연시간 및 파워소모 분석과 동작 주파수에 비례한 출력 전압의 Duty ratio 왜곡에 대한 연구도 하였다.

유기금속화학기상증착법을 이용한 적층 InAs 양자점 적외선 수광소자 성장 및 특성 평가 연구 (Study of Multi-stacked InAs Quantum Dot Infrared Photodetectors Grown by Metal Organic Chemical Vapor Deposition)

  • 김정섭;하승규;양창재;이재열;박세훈;최원준;윤의준
    • 한국진공학회지
    • /
    • 제19권3호
    • /
    • pp.217-223
    • /
    • 2010
  • 유기금속화학기상증착법으로 적층 InAs/$In_{0.1}Ga_{0.9}As$ DWELL (dot-in-a-well) 구조를 성장하여 n-i-n 구조의 적외선 수광소자를 제작하였으며, PL (photoluminescence) 발광 특성 및 암전류 특성을 분석하였다. 동일한 조건으로 양자점을 적층하였을 때 크기 및 밀도의 변화에 의한 이중 PL peak을 관찰하였으며, TMIn의 유량을 조절함으로써 단일 peak을 갖는 균일한 크기의 양자점 적층 구조를 성장할 수 있었다. 적외선 수광소자 구조를 성장함에 있어서, 상부의 n-형 GaAs의 성장 온도가 600도 이상인 경우 PL 발광 세기가 급격히 감소하였고 이에 따른 암전류의 증가를 관찰하였다. 0.5 V 인가 전압에서 암전류의 온도 의존성에 대한 활성화 에너지의 크기는 성장온도가 580도인 경우 106 meV이고, 650도의 경우는 48 meV로 급격이 낮아졌다. 이는 고온의 성장 온도에 의한 InAs 양자점과 $In_{0.1}Ga_{0.9}As$ 양자우물구조 계면에서의 열적 상호 확산에 의하여 비발광 천이가 증가되었기 때문이다.

대구피 젤라틴의 효소적 가수분해물을 이용한 조미간장의 제조 (Preparation of Imitation Sauce from Enzymatic Hydrolysate of Cod Skin Gelatin)

  • 김세권;안창범;강옥주
    • 한국식품영양과학회지
    • /
    • 제22권4호
    • /
    • pp.470-475
    • /
    • 1993
  • 대구피 젤라틴을 효소적으로 가수분해하여 얻어진 가수분해물의 분자량 분포 및 아미노산 조성을 살펴보고 이 가수분해물을 이용해 조미간장을 제조하였고 그 품질을 시판 간장과 관능적으로 비교, 검토하였다. 가수분해물의 분자량은 5,800Da영역이 주종이었으며 분자량 1,100Da, 1,500Da및 2,700Da정도의 펩티드성 분자도 존재하였다. 아미노산은 단맛을 내는 아미노산(glycine, proline, serine, alanine 및 hydroxypro-line)과 감칠맛, 신맛을 내는 아미노산(glutamic acid, aspartic acid)이 전체의 65.9%를 차지하고 있었다. 반면 쓴맛을 내는 아미노산(arginine, tyrosine, phenylala-nine, valine, leucine, methionine 및 histidine)은 전체의 26.65%에 불과하였다. 가수분해물 10.0g,식염 10.0g, 설탕 3.0g, MSG 0.5g, 카라멜분말 0.1g, 양조식초 3.0$m\ell$, 마늘분말 0.05g, 검은 후추분말 0.1g 및 감초분말 0.2g을 물 100.0$m\ell$에 용해하여 열처리한 다음 여과하여 얻어진 원액과 시판 양조간장을 8 : 2(v:v)의 비율로 혼합하여 제조한 조미간장은 시판 3종류의 화학간장과 비교해 관능적으로 손색이 없었다.

  • PDF

티타늄 배양에 대한 배양골수와 치은 섬유아세포의 생체적합성 (The Biocompatibility Of Cultured Bone Marrow Cells And Gingival Fibroblasts On The Titanium Surfaces)

  • 오충영;박준봉;권영혁;이만섭
    • Journal of Periodontal and Implant Science
    • /
    • 제26권1호
    • /
    • pp.143-160
    • /
    • 1996
  • The purpose of this study was to evaluate the response in aspect of attachment and growth rate of osteoblasts and growth rate of osteoblasts and human gingival fibroblasts to the commercially pure titanium(CP titanium)and titanium alloy(Ti-6AI-4V) that are used widely as implant materials, and to obtain the basic information to ideal implant materials. In the studly, commercially pure titanium in first test group, titanium alloy(Ti-6AI-4V) in second test group, cobalt-chrome-molybdenum alloy(Co-Cr-Mo alloy) in positive control group, and tissue culture polystyrene plate in negative control group were used. The results of this study were as follows. 1. Bone marrow cells cultured on CP titanium and Ti-6Al-4V showed significantly greater attachment and growth rate(p(0.05) compared to Co-Cr-Mo alloy in each time. 2. There were no significant differences(p>0.05) in attachment and growth rate of bone marrow cells cultured on CP titanium and Ti-6AI-4V or tissue culture plate. 3. Most bone marrow cells cultured on CP titanium, Ti-6Al-4V and tissue culture plate were attached well to each substratum in first 2days, and then, grew at higher growth rate. On the other hand, some cells cultured on Co-Cr-Mo alloy failed to attach in first 2 days, and then, attached cells grew at lower growth rate than other groups. 4. Attachment and growth rates of gingival fibroblasts cultured on CP titanium and Ti-6Al-4V showed no significant differences(p>0.05) compared to Co-Cr-Mo alloy in 2 days, but significantly greater increase(p<0.05) in 5 and 9 days. 5. There were no significantly differences(p>0.05) between growth rates on gingival fibroblasts cultured on CP titanium, Ti-6Al-4V and tissue culture plate in 2 and 5days, but a significant lower growth rate(p<0.05) on CP titanium and Ti-6Al-4V versus tissue culture plate. 6. Some gingival fibroblasts cultured on all specimen groups failed to attach, but attached cells grew well, especially on CP titanium, Ti-GAl-4V and tissue culture plate. 7. There were no significant differences(P>0.05) between growth rates of both bone marrow cells and gingival fibroblasts cultured on CP titanium and Ti-6AI-4V. As a result of this study, both commercially pure titanium and Ti-6AI-4V showed excellent biocompatibility and there was no significant difference in the cellular response to the both metals. Bone marrow cells cultured on each substratum showed significantly greater growth rate and responded sensitively to cytotoxic effects of metal surfaces compared to gingival fibroblasts. Considering cell response to the substrate, it was likely that the composition itself of titanium metals have no significant effect on the biocompatibility. Further study need to be done to evaluate the influence of surface characteristics on cellular responses.

  • PDF