• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 추계학술발표회
• /
• pp.59-59
• /
• 1996

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.9-15
• /
• 2005

본 연구에서는 전기화학적 방법에 의한 암모니아의 질소화 분해 특성을 파악하기 위하여 여러 암모니아 전해 실험 변수에 대하여 조사하였다. $IrO_2$, $RuO_2$, Pt 양극에서 암모니아의 분해에 대한 pH 및 염소 이온의 영향이 상호 비교되었으며, 전해 반응기에서의 분리막의 존재 유무, 전류밀도, 암모니아 초기 농도 등의 변화에 따른 암모니아의 전기화학적 분해 특성이 조사되었다. 산성이나 알칼리 조건에서 암모니아의 분해에 대한 전극의 성능은 전체적으로 $RuO_2{\approx}IrO_2>Pt$ 순으로 나타났다. 암모니아의 분해는 전극에 공급되는 전류 밀도가 $80mA/cm^2$에서 가장 높았으며 그 이상의 전류 밀도에서는 산소발생에 의해 암모니아의 전극 흡착이 영향을 받아 오히려 감소되었다. 암모니아 용액에 존재하는 염소 이온의 농도가 증가할수록 암모니아의 분해는 증가하나 10 g/l 이상에서는 분해율 증가가 크게 둔화되었다. pH 7의 전해 반응의 경우 전극 표면에서 OH 라디칼이 생성되어 암모늄 이온의 분해가 이루어지는데, 이 OH 라디칼은 $RuO_2$ 전극에서 가장 많이 생성이 되었다.

• 전기학회논문지P
• /
• 제63권1호
• /
• pp.46-49
• /
• 2014

$Pb(Zr_{0.52}Ti_{0.48})O_3(PZT)$ thin films deposited on $Ru/RuO_2$ bottom electrode that grown for in-situ progress used rf magnetron sputtering method. We investigated the dependence of the crystalline and electrical properties in the way of capacitors PZT thin films. Our results show that all PZT films indicated polycrystalline perovskite structure with preferred orientation (110) and no pyrochlore phase is observed. The electric properties of the Ru improved with increasing Ru thin films thickness. A well-fabricated Ru/PZT/Ru (100 nm) /$RuO_2$ capacitor showed a leakage current density in the order of $2.03{\times}10^{-7}$ $A/cm^2$ as a 50 kV/cm, a remnant polarization (Pr) of 9.22 ${\mu}C/cm^2$, and a coercive field (-EC) of -32.22 kV/cm. The results show that $Ru/Ru/RuO_2$ bottom electrodes are expected to reduce the degradation ferroelectric fatigue and excellent ferroelectric properties.

• Journal of Electrochemical Science and Technology
• /
• 제8권1호
• /
• pp.7-14
• /
• 2017

This study aims to examine the influences of substrates/diffusion layers (DL) and oxygen reduction reaction catalysts ($M_{ORR}$) on the performance of $M_{ORR}/IrO_2$/DL-type bifunctional oxygen electrodes for use in polymer electrolyte membrane (PEM)-type unitized regenerative fuel cells (URFC). The $M_{ORR}/IrO_2$/DL electrodes were prepared via two sequential steps: anodic electrodeposition of $IrO_2$ on various DLs and fabrication of $M_{ORR}$ layers (Pt, Pd, and Pt-Ru) by spraying on $IrO_2/DL$. Experiments using different DLs, with Pt as the $M_{ORR}$, revealed that the roughness factor of the DL mainly determined the electrode performance for both water electrolyzer (WE) and fuel cell (FC) operations, while the contributions of porosity and substrate material were insignificant. When Pt-Ru was utilized as the $M_{ORR}$ instead of Pt, WE performance was enhanced and the electrode performance was assessed by analyzing round-trip efficiencies (${\varepsilon}_{RT}$) at current densities of 0.2 and $0.4A/cm^2$. As a result, using Pt-Ru instead of Pt alone provided better ${\varepsilon}_{RT}$ at both current densities, while Pd resulted in very low ${\varepsilon}_{RT}$. Improved efficiency was related to the additional catalytic action by Ru toward ORR during WE operation.

• 한국재료학회지
• /
• 제21권3호
• /
• pp.138-143
• /
• 2011

Nanosized Pt, Pt-Ru and Pt-$CeO_2$ electrocatalysts supported on acid-treated carbon nanotube (CNT) were synthesized by microwave-assisted heating of polyol process using $H_2Cl_6Pt{\cdot}6H_2O$, $RuCl_3$, $CeCl_3$ precursors, respectively, and were characterized by XRD and TEM. And then the electrochemical activity of methanol oxidation for catalyst/CNT nanocomposite electrodes was investigated. The microwave assisted polyol process produced the nano-sized crystalline catalysts particles on CNT. The size of Pt supported on CNT was 7~12 nm but it decreased to 3~5 nm in which 10wt% sodium acetate was added as a stabilizer during the polyol process. This fine Pt catalyst particles resulted in a higher current density for Pt/CNT electrode. It was also found that 10 nm size of PtRu alloys were formed by polyol process and the onset potential decreased with Ru addition. Cyclic voltammetry analysis revealed that the $Pt_{75}Ru_{25}/CNT$ electrode had the highest electrochemical activity owing to a higher ratio of the forward to reverse anodic peak current. And the chronoamperemetry test showed that $Pt_{75}Ru_{25}$ catalyst had a good catalyst stability. The activity of Pt was also found to be improved with the addition of $CeO_2$.

• Transactions on Electrical and Electronic Materials
• /
• 제1권4호
• /
• pp.30-39
• /
• 2000

The variation of electrical properties of (Ba, Sr)TiO$_3$[BST] thin films deposited of RuO$_2$electrode with (Ba+Sr)/Tr ration was investigated. BST thin films with various (Ba+Sr)/Tr ration were deposited on RuO$_2$/Si substrates using in-situ RF magnetron sputtering. It was found that the electrical properties of BST films depends on the composition in the film. The dielectric constant of the BST films is about 190 at the (Ba+Sr)/Tr ration of 1.0, 1,025 and does not change markedly. But , the dielectric constant degraded to 145 as the (Ba+Sr)/Tr ratio increase to 1.0. In particular, the leakage current mechanism of the films shows the strong dependence on the (Ba+Sr)/Tr ration in the films. At the ration (Ba+Sr)/Tr=1,025, the Al/BST/RuO$_2$ capacitor show the most asymmetric behavior in the leakage current density, vs, electric field plot. It is considered that the leakage current of the (Ba+Sr)/Tr=1,025 thin films is controlled by the battier-Iimited process, i,e, Schottky emission.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.920-923
• /
• 2000

All solid-state thin film supercapacitor(TFSC) based on $RuO_2$ electrode was fabricated. Ruthenium oxide$(RuO_2)$ thin film was deposited on Pt/Ti/Si subsrate by d.c. magnetron sputtering. LiPON(lithium phosphorus oxynitride) thin film were deposited by r.f. reactive sputtering. X-ray diffraction patterns of $RuO_2$ and LiPON films revealed that crystal structures of both films were amorphous. To decrease resistivity of $RuO_2$ thin film, $RuO_2$ thin film was deposited with $H_2O$ vapor. In order to decide the maximum ionic conductivity, the LiPON films were prepared by various sputtering condition. The maximum ionic conductivity was $9.5\times{10}^7S/cm$. A charge-discharge measurements showed the capacity of $3\times{10-2}\;F/cm^2-\mu{m}$ for the as-fabricated TFSC. The discharging efficiency was decreased after 500 cycles by 40 %.

• 한국재료학회지
• /
• 제21권8호
• /
• pp.419-424
• /
• 2011

Pt nanoparticle catalysts incorporated on $RuO_2$ nanowire support were successfully synthesized and their electrochemical properties, such as methanol electro-oxidation and electrochemically active surface (EAS) area, were demonstrated for direct methanol fuel cells (DMFCs). After fabricating $RuO_2$ nanowire support via an electrospinning method, two different types of incorporated Pt nanoparticle electrocatalysts were prepared using a precipitation method via the reaction with $NaBH_4$ as a reducing agent. One electrocatalyst was 20 wt% Pt/$RuO_2$, and the other was 40 wt% Pt/$RuO_2$. The structural and electrochemical properties of the Pt nanoparticle electrocatalysts incorporated on electrospun $RuO_2$ nanowire support were investigated using a bright field transmission electron microscopy (bright field TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry. The bright field TEM, XRD, and XPS results indicate that Pt nanoparticle electrocatalysts with sizes of approximately 2-4 nm were well incorporated on the electrospun $RuO_2$ nanowire support with a diameter of approximately 50 nm. The cyclic voltammetry results showed that the Pt nanoparticle catalysts incorporated on the electrospun $RuO_2$ nanowire support give superior catalytic activity in the methanol electro-oxidation and a higher electrochemically active surface (EAS) area when compared with the electrospun Pt nanowire electrocatalysts without the $RuO_2$ nanowire support. Therefore, the Pt nanoparticle catalysts incorporated on the electrospun $RuO_2$ nanowire support could be a promising electrode for direct methanol fuel cells (DMFCs).

• Corrosion Science and Technology
• /
• 제6권2호
• /
• pp.44-49
• /
• 2007

Dimensionally stable anodes have been widely used to cathodically protect the metallic materials in corrosive environments including concrete structure as the insoluble anode. Lifespan of the anode for concrete construction can be determined by NACE TM0294-94 method. Lifespan of conductive oxide electrode would be affected by thermal treatment condition in the process of sol-gel coatings. This work aims to evaluate the effect of thermal treatment temperature on the lifespan of the $RuO_{2}$ electrode. $450^{\circ}C$ treated conductive oxide electrode showed the excellent properties and its lifespan was evaluated to be over 88 years in 3% NaCl, 4% NaOH, and simulated pore water. This behavior was related to the formation of $RuO_{2}$.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.599-604
• /
• 1998

본 논문은 PZT 박막의 기억소자 응용을 위한 Pt 그리고 RuO2 박막을 조사하였다. 초고주파 마그네트론 스퍼터링 방법을 이용하여 하부전극을 성장하였으며, 조사된 실험변수는 기판온도, 가스 부분압, RF 전력 그리고 후열처리 등이다. 기판온도는 Pt, $RuO_2$박막의 결정구조 뿐만 아니라 표면구조 및 비저항 성분에 크게 영향을 주었다. Pt 박막의 XRD 분석으로 기판온도가 상온에서 $200^{\circ}C$까지는 (111) 그리고 (200) 면이 혼재하는 결과를 보였으나 $300^{\circ}C$에서는 (111) 면으로 우선 방위 성장 특성을 보였다. XRD와 AFM 해석으로부터 Pt 박막 성장시 기판온도 $300^{\circ}C$, RF 전력 80W가 추천된다. 산소 분압비를 0~50%까지 가변하여 조사한 결과 산소가 5% 미만으로 공급되면 Ru 금속이 성장되고, 산소 분압비가 10 ~40%까지는 Ru와 $RuO_2$ 상이 공존하였으며 산소 분압비가 50%에서는 순수한 $RuO_2$상만이 검축되었다. 이 결과로부터 RuO2/Ru 이층 구조의 하부전극 형성이 산소 가스 부분압을 조절하여 한번의 공정으로 성장 가능하며, 이런 구조를 이용하면 금속의 낮은 비저항을 유지하면서도 PZT 박막의 산소 결핍에 의한 기억소자의 피로도 문제를 완화할 것으로 사료된다. 후 열처리 온도를 상온에서부터 $700^{\circ}C$까지 증가할 때 Pt와 $RuO_2$의 비저항 성분은 선형적 감소 추세를 보였다. 본 논문은 강유전체 기억소자 응용을 위한 최적화된 하부전극 제적조건을 제시한다.