• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.5-8
• /
• 2006

수소 station에서 수소분리정제를 위한 compact형 PSA 공정 설계를 위하여 활성탄으로 충진된 dual bed의 흡착동특성을 연구하였다. 기존 PSA 공정의 흡착탑이 차지하는 시스템의 공간을 줄이기 위하여 하나의 흡착탑 안에 다른 흡착탑을 넣어 흡착탑이 차지하는 공간을 최소화하고, 흡착탑 간의 열교환을 효과적으로 할 수 있도록 고안하였다. 수소 혼합물에 대한 dual bed에서의 흡착, 탈착 실험 실시하였으며, 시간에 따른 농도와 온도의 변화를 측정하였다. 수소 혼합물로는 $H_2/CO/CH_4/CO_2$ (69:2:3:26vol.%)를 사용하였으며, 흡착유량은 7LPM, 흡착압력은 9atm 조건에서 운전하였다. Inner bed와 outer bed의 수소 농도 파과곡선의 형태에 있어 차이를 보였으며, 이는 각 탑에서 열교환 효과로 인한 내부 온도 차이에 기인하여 발생하였다.

• Clean Technology
• /
• v.20 no.3
• /
• pp.290-297
• /
• 2014

Batch adsorption studies were carried out for equilibrium, kinetics and thermodynamic parameters for adsorption of coomassi brilliant blue G (CBBG) using activated carbon with varying the operating variables like initial concentration, contact time and temperature. Equilibrium adsorption data were fitted into Langmuir, Freundlich and Dubinin-Radushkevich isotherms. From estimated separation factor of Langmuir and Freundlich, this process could be employed as effective treatment for removal of CBBG. Also from Dubinin-Radushkevich isotherm model, adsorption energy (E) indicated adsorption process is physical adsorption. From kinetic experiments, the adsorption reaction was found to confirm to the pseudo second order model with good correlation. Intraparticle diffusion was rate controlling step. Thermodynamic parameters like change of free energy, enthalpy, and entropy were also calculated to predict the nature of adsorption. The change of enthalpy (406.12 kJ/mol) indicated endothermic nature of the adsorption process. The change of entropy (1.66 kJ/mol K) showed increasing disorder in process. The change of free energy found that the spontaneity of process increased with increasing adsorption temperature.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.24-30
• /
• 2002

The laboratory adsorption batch tests were performed to investigate the adsorption characteristics of Pb on kaolinite. The characteristics such as adsorption equilibrium time, adsorption capacity, adsorption isotherm were studied, and also the effects of pH and the mixing ratio on the adsorption of Pb on kaolinite were investigated. Test results show that the adsorption equilibrium state was reached within 24 hours, and the adsorbed amount of Pb increased, but the adsorption efficiency over the initial concentration of 198 mg/l decreased, with increasing the initial concentration of Pb. And the adsorption constant, 1/n was obtained 0.9584 by Freundlich isotherm equation. Regardless of the initial concentration of Pb. the adsorbed amount of Pb as well as the adsorption efficiency were increased with increasing pH values and converged to a certain constant value above 8 of pH values. And also the adsorbed amount of Pb increased with the mixing ratio, but its efficiency increased with the mixing ratio up to 8 and then showed the decreasing tendency above that.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.277-285
• /
• 2007

The adsorption characteristics of multi-component solvent vapors including poorly-adsorbable chemicals such as toluene-xylene-MEK and toluene-MEK-IPA on the activated carbonaceous adsorbents were investigated in a stainless steel fixed bed of 10.2 cm ID and 50 cm in height in order to identify those carbons for eliminating and recovering solvent vapors from industrial emission sources. The used activated carbonaceous adsorbents were pelletized commercial activated carbons and activated carbon fiber. Breakthrough curves and adsorption capacity at atmospheric pressures were obtained. It has been found that non-polar and larger molecules have been adsorbed better than polar and smaller molecules. In special, alcohols and ketones were poorly adsorbed caused by competitive adsorbability in multi-component mixture system. However, it could be overcome by profitable employment of organization of cooperative system which was composed of different porosity activated carbonaceous adsorbents appropriately.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.149-149
• /
• 2023

미세플라스틱은 입자크기가 5 mm 이하인 플라스틱으로 정의되며, 수계로 유입된 미세플라스틱은 내분비계 교란물질로 작용하여 생태계에 환경독성을 유발하고 오염물질을 흡착·운반할 수 있는 독성 물질의 매개체로서 미세플라스틱의 위해성에 대한 우려가 증가하고 있다. 본 연구는 수용액에서 다양한 미세플라스틱의 납(Pb) 흡착특성을 평가하고 미세플라스틱의 비표면적에 따른 흡착 효과를 비교하고자 하였다. 플라스틱 종류 중 HDPE (High-density Polyethylene)와 PVC (Polyvinyl Chloride)를 각각 세 가지 크기(Group 1: 2.5 mm - 1.0 mm, Group 2: 1.0 mm - 0.3 mm, Group 3: < 0.3 mm)로 제조하여 분류하였으며, 미세플라스틱 입자크기의 비표면적은 BET(Brunauer, Emmett, Teller)분석을 통하여 측정하였다. 담수환경 조성을 위해 pH 7로 조절한 Pb 용액의 농도(0, 0.5, 1, 5, 10, 30 mg/L)별 흡착실험을 수행하였으며 실험결과를 3가지 흡착등온식(Langmuir, Freundlich, Sips 모델)을 사용하여 미세플라스틱에서 Pb 흡착 거동을 나타내었다. BET 분석 측정결과, PVC의 경우 Group 3 > Group 2 > Group 1 순으로 PVC의 입자크기가 작을수록 비표면적이 크게 나타났으며, HDPE 비표면적 또한 비슷한 경향을 보였다. HDPE와 PVC에서 Pb의 흡착은 Langmuir 모델(R² > 0.97)과 Freundlich 모델(R² > 0.82)보다 Sips 모델(R² > 0.98)이 흡착 거동을 설명하기에 가장 적합하였다. 최대흡착능(Q_m) 상수는 입자크기가 작아질수록 흡착능이 높아지는 추세를 보였으며, 흡착세기(K_F)와 흡착강도(n^-1)는 각 플라스틱의 Group 3(HDPE K_F = 0.028, PVC K_F = 0.032; HDPE n^-1 = 0.225, PVC n^-1 = 0.547)에서 가장 높게 나타났다. 본 연구를 통해 HDPE와 PVC에서 Pb의 흡착특성은 Sips모델로 설명이 가능했으며, 이에 따라 Pb 흡착과정에 복수의 흡착메커니즘이 작용하고 있음을 유추해볼 수 있었다. 미세플라스틱의 입자크기와 비표면적이 Pb 흡착량에 영향을 미치는 것을 알 수 있었으며, 미세플라스틱이 중금속을 흡착하여 생물체 내로 전이시킬 수 있는 매개체 역할의 가능성을 확인하였다.

• Journal of the Korean Chemical Society
• /
• v.37 no.12
• /
• pp.1019-1024
• /
• 1993

The coadsorption of carbon monoxide and oxygen on polycrystalline nickel surface has been studied using XPS at the room temperaure. The adsorption of CO on the nickel surface precovered partially with oxygen is found to take place by the following steps: The CO molecules react with the preadsorbed oxygen atoms to liberate $CO_2$ gas at the initial stage of low CO exposures, and they are coadsorbed gradually with the increasing CO exposures. The extent of coadsorption at the higher CO exposures is found to decrease with the increasing degree of oxygen preadsorption. This finding is explained in terms of the reduced adsorption site for CO as a consequence of oxygen preadsorption. The CO molecules preadsorbed on the nickel surface inhibited the adsorption of $O_2$ molecules. The increase of oxygen exposure led to the dissociation of preadsorbed CO, and the NiO layers were formed concurrently. The dissociation was rendered to arise from an oxygen-to-CO energy transfer.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.365-369
• /
• 1998

Theory of the adsorption by a monolayer is extended to the multiple adsorption layers. Though the model used is extremely simple, the adsorption isotherm thus obtained describes well qualitatively the nature of unsaturation adsorptions such as $Br_2$adsorption by the silica gel.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.157-170
• /
• 2000

In this study, we conducted a combined adsorption-sequential extraction analysis(CASA) to investigate temperature effects of single and competitive adsorption of zinc and copper on natural clays. As a result, it was found out that in a single adsorption of zinc, the adsorption was mostly in the exchangeable phase, with increase n temperature. In a competitive adsorption of zinc, this trend was so strong that the exchangeable phase adsorption increase up to 80~90%. On the other hand, about 50% of copper was adsorbed in the carbonate occluded phase in single and competitive adsorptions. In the single adsorption the adsorption of carbonate occluded phase increased by 5% with the temperature increase and in the competitive adsorption the increase rate is about twice. The adsorption of zinc and copper on natural clays is an endothermic reaction with the exception of exchangeable phase adsorption.

• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.381-385
• /
• 2003

We investigated possible application of waste ferrite in treating Cd and Pb in wastewater. Adsorption of Cd and Pb on Mn-Ferrite are influenced by several controlling factors such as contact time, heavy metal concentrations, pH and temperature. Both Cd and Pb achieved adsorption equilibrium within 5 minutes. Based upon this kinetic data, 24 hours of contact time was allowed for other experiment. The adsorption of Cd and Pb was high at high pH and high ion concentrations. The reaction was also affected by temperature. Adsorption isotherms fits well with the Freundlich isotherm equation. pH is the main controlling factor in Cd, Pb adsorption on the Mn-ferrite. Cd showed S type adsorption curve while Pb showed sorption edges, depending on the Pb concentrations.

• New & Renewable Energy
• /
• v.2 no.2 s.6
• /
• pp.60-68
• /
• 2006

소수 station의 수소분리정제를 위한 compact형 PSA 공정을 연구하였다. 기존 PSA 공정의 흡착탑이 차지하는 시스템의 공간을 줄이기 위하여 하나의 흡착탑 안에 다른 흡착탑을 넣어 흡착탑이 차지하는 공간을 최소화하였으며, 흡착탑 간의 열교환이 효과적으로 일어나도록 설계하였다. 수소 혼합물에 대한 활성탄으로 충진된 dual bed에서의 수소 혼합물에 대한 흡/탈착 동특성 실험을 실시하였으며, 시간에 따른 농도와 온도의 변화를 측정하였다. 수소 혼합물로는 $H_2/CO/CH_4/CO_2$ (69:2:3:26 vol.%) 를 사용하였으며, 흡착유량은 7LPM, 흡착압력은 9atm 조건에서 운전하였다. Inner bed와 outer bed의 성능은 각각의 열전달 특성의 차이로 인하여 다르게 나타났으나, 단일탑의 동특성보다는 우수한 성능을 보이고 있었다. 따라서 개발된 dual bed는 적은 부지를 차지하면서도, 보다 우수한 수소 분리 성능을 보일 수 있는 PSA 공정에 응용될 수 있음을 확인하였다.