• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2006.06a
• /
• pp.107-115
• /
• 2006

본 논문은 유비쿼터스 환경하에서 수신된 RF 신호의 수신 강도를 이용하여 위치를 추정하고 이를 기반으로 각종 서비스를 제공하는 시스템이다. 이는 크게 무선 송신 단말기, 정보처리 기지국 위치인식 서버 및 시스템 호스트의 네 부분으로 구성되었으며, 30층 규모의 건물에 5000여 개의 단말기가 운영 중에 있다. 실내에서의 이동 객체 위치를 추정하기 위하여 자체 개발, 제작된 송/수신기의 RF 감쇠 특성을 살펴보고, 이를 이용하여 책상, 파티션 등 사무 기기로 이루어진 사무실에서의 위치추정 방법을 소개한다. 실내 환경의 변화와 주변 시설물 등의 영향으로 RF 신호는 감쇠, 흡수, 반사, 회절 등 많은 영향을 받으며, 특히 복층의 경우 층간 효과도 존재한다. 이러 한 실내 상황에서 위치추정 결과를 제시하며, BAS등 회부 시스템과의 연계를 통한 지능적인 서비스를 제공한다. 제고하는 서비스에는 사용자 위치에 근거한 자동 조명/공조 연동 및 주차장 Gate 연동 서비스 등 기본적인 공공 서비스부터 개인별 시강/wellness 이용 현황 등을 자동 체크하여 이에 근거한 요금 부과 및 Schedule 관리 등을 할 수 있게 하는 개인 서비스가 있다. 또한 본 시스템을 실제로 설치, 운영하고 있는 적용 사이트에 관한 사례를 통해 앞으로의 개선 방향 및 서비스 효율성 등에 관해 논의한다.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.195-204
• /
• 2006

A linear acoustic analysis has been performed to elucidate damping characteristics of acoustic cavities in a liquid rocket combustor. Results have shown that resonant frequencies of acoustic cavity obtained by classical theoretic approach and by the present linear analysis are somewhat different with each other. This difference is attributed to the limitation of the simplified classical theory. To quantify the damping characteristics, acoustic impedance has been introduced and resultant absorption coefficient and conductance have been evaluated. Satisfactory agreement has been achieved with previous experiment. Finally the design procedure for an optimal tuning of acoustic cavity has been established.

• Progress in Medical Physics
• /
• v.11 no.2
• /
• pp.131-139
• /
• 2000

We designed high dose rate Ir-192 source which was prepared for substitute the Co-60 source in Ralstron unit (Simatsu, Japan) which is supplied for cervical cancer treatment. The source dimension is 1.5 mm in a diameter and 1.5mm thickness of cylinder and encapsulated with 3 mm diameter of stainless steel(SUS316L) to substituted for the Co-60 source size. The Ir-192 source was prepared the dose model for tissue dose computation through the experimental determination of apparent activity and applied the empirical tissue correction factors extended to 20cm distance. The tissue dose model was applied the 4.69 R/cm-mCi-hr gamma constant and the ratio of energy absorption coefficient of water to that of air showed 1.112 include filteration of the self-absorptions. In this experiments, we prepared the dose computation software to clinical usefulness.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.24-30
• /
• 2006

Integrated cavity output spectroscopy(ICOS) is a simple, non-intrusive absorption measurement technique that can detect and quantify trace-level gas species. The spectral absorbance of a gas is quantified from the integrated optical output of the modulated high-finesse cavity containing the sample which is irradiated by a wavelength-swept laser source. We constructed an experimental setup by using a tunable single mode external cavity diode laser operating at the wavelength near 765 nm and a Fabry-Perot cavity with length modulation achieved by a piezoelectric transducer where one of the cavity mirrors sat on. In the experiment performed on minute oxygen gas at the wave-length near 764.5nm, we demonstrated the minimum detectable absorption of $8.45\times10^{-8}cm^{-1}$.

• Journal of Biomedical Engineering Research
• /
• v.24 no.1
• /
• pp.31-36
• /
• 2003

Impact characteristics of six DM(Diabetes Mellitus) shoe insole materials (Podian, Plastazote black, Plastazote white, Flexible PU foam, Podialene 200 blue and Podia flex) and three multi-density insoles (AP, OS and PW insoles) were determined in the present study, using a self-designed impact measurement system. The coefficient of restitution, the median frequency and the attenuation index were calculated for each material, based on impact forces and linear accelerations. Podian revealed the superiority in the coefficient of restitution and the attenuation index. The median frequency of the Flexible PU foam was the smallest. Results also showed that the heel region was the most impact-attenuated among other areas in the insole. OS insole showed the better characteristics in the coefficient of restitution and the median frequency. but there was no significant difference in the attenuation index. Similar impact characteristics were found in all areas in PW insole. since it was basically of the same dual-density polyurethane.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.123-129
• /
• 2000

We set up a loss measurement apparatus using cavity ring-down method to get the losses in mirror having a small absorption and scattering. The measured errors could be explained by the loss inhomogeneity of the position of the mirror included in the cavity, and we knew that the long~period measurement limit of apparatus is three days, the minimum error limit of Lhe term is 4 ppm, which were gotten by measuring the long-period and short-period decay time in both reference and test cavity. Also we determined the losses m various mirrors fabricated at our laboratory using the apparatus and we found that the losses in mirrors are quite different at their spatial positions. tions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.426-433
• /
• 2019

After an earthquake, fire and gas explosions are more likely to cause more casualties in cities with many apartment buildings and large complex buildings. In order to prevent this, seismic design is necessary for the fire protection sprinkler system. However, most systems currently use stainless-steel pipes, although synthetic resin pipes are used in some special places. These materials are susceptible to vibration and earthquakes. This study evaluated the displacement absorption flexibility of polyethylene (PE) and aluminum (Al) multi-layered composite pipes to increase the seismic performance in a vibration environment and during earthquakes. The seismic performance was compared with that of a stainless-steel and PE pipes. The seismic characteristics can be measured by measuring the amount and extent of vibration transmitted by the sprinkler pipe. This method can be used to judge the seismic characteristics to attenuate the vibration during an earthquake. The seismic characteristics of the pipe were verified by comparing the logarithmic attenuation rate to the initial response displacement of the vibration generated by the transverse vibration measurement method.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.1
• /
• pp.10-19
• /
• 1993

As a method to measure the absorbing characteristics of microwave absorber, the various microwave measuring method can be used fundamentally. There is, however, a big problem in measuring errors, since the wavelength of microwave such as used for radar is very short. Therefore, this research aimed to design and fabricate a converting adaptor of 20mm .PHI. coaxial tube from a Type - N connector to $20mm\phi$ coaxial tube and to use it for evaluating absorption characteristics of microwave absorber. Furthermore, the measurements of absorbing characteristics and material constants have been performed and reviewed, which were carried out by using the coaxial tube and by using rectangular waveguide, res- pectively. As a result, the validity of the proposed measuring method has been confirmed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.1 s.118
• /
• pp.55-64
• /
• 2007

In the built-up structure consisting of a stiff beam and a flexible plate, Grice showed that the plate behaves as an energy absorber in narrow frequency bands(called plate blocking effect). This paper deals with such beam-plate coupled structures, where the plate is an energy absorber and the excited beam is an energy path. It is found that such energy dissipation can occur in the relatively broad bands, if different stiffnesses are used in the rectangular plate. It was experimentally verified by Heckl that the energies in terms of one-third octave band averages transferred to the plate(or dissipated in the plate) increase for increased plate damping. This Paper, however, shows that the energy absorption suddenly reduces at the certain narrow frequency bands where the plate damping effect upon the coupled beam is maximum. Also, in order to minimize energy transfer through the beam in terms of one-third octave band averages, it is advantageous to increase the plate damping closer to the excitation point All these results are based on the wane method.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.62-63
• /
• 2000

다양한 분야의 요구에 따라 반사율이 99.995% 이상인 고반사 저손실 반사경의 제작이 가능해 지면서 반사경의 산란, 투과, 흡수 및 손실 등을 측정하는 여러 측정 방법들도 더불어 연구되어 왔다. 적용 분야에 따라 사용될 반사경의 특성이 결정되는데 그 중 중력파 측정 장치$^{(1)}$ , 광자 감쇠 분광기$^{(2)}$ 등의 분야에서는 투과, 산란 및 흡수가 모두 작은 저손실 반사경을 요구한다. 한편 링 레이저 자이로스코프의 경우 반사경의 산란이 곧 lock-in을 결정하여 성능을 제한하는 중요한 변수가 된다. 따라서 이 응용의 경우 반사경의 산란을 정확히 측정하는 일은 중요하며 위치에 따른 산란분포 정보를 알면 링 레이저 자이로스코프의 성능 예측과 개선이 더욱 쉬워진다. 산란을 측정하는 직접적인 방법에는 ARS(angle resolved scattering)과 TIS(total integrated scattering)이 있는데, 본 연구에서는 TIS 측정 장비를 반사경의 위치에 따른 산란분포까지 측정할 수 있도록 mapping 기능을 첨가하고 이온빔 스퍼터링에 의해 제작된 저산란 반사경을 측정하기 위해 높은 분해능을 갖도록 구성하였다. 반사경의 응용분야의 필요에 의해 45$^{\circ}$ 산란을 측정하였다. (중략)