• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.69-73
• /
• 2006

일반신호기는 정해진 신호시간에 따라 독립적으로 운영되는 정주기신호기와 TOD(Time of Day)식 신호기이다. 이런 일반신호기의 단점으로는 변동되는 교통량에 대응이 불가능하고, 교통량에 관계없이 연속적으로 신호체계가 이루어지기 때문에 차량의 이동성이 비효율적으로 됨에 따라 생산성 감소, 에너지낭비 및 자동차 배기가스 증가를 초래하고 있다 이를 개선하기 위한 방법으로서 본 논문에서는 4차선의 주차로와 2차선의 소방로로 이루어진 교차로에서 주차로의 교통량이 많을 경우, 차로에서는 녹색불이 지속되어 교통의 흐름을 원활하게 해주며, 소방로에서 차량이 일정량 증가하게 되면, 주차로의 신호등이 적색등을 바꾸어 소방로의 차량이 교통되도록 하는 지능형 교통체계에 대해 VHDL을 이용하여 지능형 신호체계 시스템을 설계하였다.

• JOURNAL OF ELECTRICAL WORLD
• /
• no.6 s.2
• /
• pp.33-38
• /
• 1974

우리나라 남${\codt}$서해안선의 총 연장은 5,000천에 달하며 크고 작은 섬들만도 2,000여개가 산재하고 있다. 여기에 밀려드는 조석 및 파력에너지의 포장량은 전력으로 환산하여 줄잡아 $10^{8}KW$ Order의 ''이론적 포장에너지량''이 부존하고 있다고 생각된다. 수력의 경우 구주각국이나 일본에 있어서는 ''기술적 포장수력''의 $25{\~}50{\%}$가 ''기술적 포장수력''으로, 그리고 $10{\~}20{\%}$가 ''경제적 포장수력''이라는 통계치가 나와 있다. 조력의 경우 이와같은 수치를 그대로 적용할 수는 없겠지만, 수천만kw Order의 기술적 또는 경제적 포장능력이 우리나라 남서해안에 부존할 수 있음에 수긍이 간다. 이론적으로 포장량을 기술적 포장량으로 바꾸고 이를 다시 실현성있는 경제적 포장량화하는 원동력은 인간의 지혜 곧 ''기술''과 역사의 흐름 곧 ''시운''에 좌우된다고 하겠다. 정부는 국내 부존에너지자원의 활용 극대화를 위하여 ‘74년도 우리나라 서해안의 조력발전기초조사를 과학기술처 산하 ${\ulcorner}$한국해양개발연구소${\lrcorner}$를 중심으로 하여 실시하게 된다. 국내 관계기관 및 전문가들의 적극적 참여와 협조를 바란다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.466-466
• /
• 2012

하천의 하구에서는 해수의 흐름에 따른 연안토사의 이동과 하천유황에 따른 상류에서의 토사량에 따라 하상이 변화한다. 특히 하구부에서의 퇴적토사 증가는 하천의 수질변화와 어도단절 등으로 인해 하천환경에 악영향을 끼칠 수 있는 하구폐쇄를 발생시킬 수 있어 이에 따른 모니터링이 필요하다. 본 연구에서는 동해안으로 유출되는 지방 1급 하천인 가곡천과 호산천을 대상으로 하구부 퇴적토사의 변화를 모니터링 하였다. 하상변화의 모니터링은 최신장비인 지상 LiDAR를 이용하여 다시기로 스캔한 지상 LiDAR 측정자료를 활용하여 퇴적량을 산출하고 퇴적과 침식의 변화양상을 분석하였다. 분석결과 퇴적지점과 침식지점 및 이에 대한 체적량 변화를 정밀하게 확인할 수 있었다. 지상 LiDAR를 활용한 하상변화 분석기법은 정밀한 퇴적량 추이를 빠르게 관찰할 수 있어 하구지역 뿐만 아니라 하천 전반에서의 하상변화를 조사하는 데에 있어 활용도가 높을 것으로 판단된다.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.237-245
• /
• 1997

In this paper, a flow control mechanism is proposed which is based on the priority control between communication path of a node. In this scheme, demanding length of a data queue for any pre-defined, then each node in that path is forced to maintains buffer size under the limit by controlling priority level of the path. The communication path which requires higher bandwidth sets its demanding queue length smaller. By providing relationship between the priority of a path and length of its queue, the high bandwidth requesting path has a better chance to get high bandwidth by defining the smaller demanding queue size. And also, by forcing a path which has high flow rate to maintain small queue size in the path of the communication, the scheme keep the transmission delay of the path small. The size of the demanding queue of a path is regularly adjusted to meet the applications requirement, and the load status of the network during the life time of the communication. The priority control based on the demanding queue size is also provided in the intermediate nodes as well as the end nodes. By that the flow control can provide a quicker result than end to-end flow control, it provides better performance advantage especially for the high speed network.

• Journal of Wetlands Research
• /
• v.23 no.3
• /
• pp.242-251
• /
• 2021

Surface water pollution is a serious environmental problem in developing countries, like India, due to the unregulated discharge of untreated wastewater. To overcome this, the constructed wetlands (CWs) have been proven to be an efficient technology for wastewater treatment. In this study, different existing and experimental facilities were reviewed to be able to determine the current status of constructed wetlands in India. Based on the collected data from published literature, industrial wastewater contained the highest average chemical oxygen demand (COD), biochemical oxygen demand (BOD). In terms of total nitrogen (TN), Total phosphorous (TP), the lowest concentration was found on domestic wastewater. Vertical flow constructed wetlands (VFCW) and Horizontal flow constructed wetland (HFCW) were more effective in removing TSS, BOD, TP in domestic and industrial wastewater, whereas hybrid constructed wetlands (HCW) showed the highest removal for COD. The use of constructed wetlands as advanced wastewater treatment facilities in India yielded better water quality. The treatment of wastewater using constructed wetlands also enabled further reuse of wastewater for irrigation and other agricultural purposes. Overall, this study can be beneficial in evaluating and promoting the use of constructed wetlands in India.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.536-536
• /
• 2012

댐은 하천의 흐름을 막아 그 저수를 생활 및 공업용수, 농업용수, 발전, 홍수조절, 특정용도로 이용하기 위한 구조물을 일컫는다. 여러 가지 용도로 만든 댐의 저수지에는 상류에서 들어오는 유사가 저수지 바닥에 가라앉아 쌓이게 되는데 이를 저수지 퇴사(reservoir sedimentation)라 하며, 이는 저수지 유효 용량을 감소시키고 홍수시 유입 하천의 홍수위를 상승 및 저수지 수질을 악화시키는 등의 문제를 일으킨다. 저수지를 관리함에 있어 저수지로 유입되어 바닥에 가라앉는 퇴사량을 분석하고 저수용량과 수면적의 감소율을 예측하는 것은 효율적인 저수지 장기운영에서 매우 중요한 사항이다. 본 연구에서 향후 저수지로 유입되는 일유출량의 예측을 위해 과거 1987~2011년(25년)의 충주 댐 일유입량($m^3/s$) 자료를 단순반복시켜 향후 50년 동안의 일유량($m^3/s$)을 산정하였고, 일단위 모의가 가능한 유역단위의 분포형 장기 강우-유출모형인 SWAT를 이용하여 산정된 일유량($m^3/s$) 자료를 비교 평가하여 모형의 검증을 실시하였다. 유량-유사량 관계곡선을 이용하여 분석 대상 기간 동안의 총유사량을 구할 수 있으며, 한강유역조사(2002)에서 유도한 충주댐 상류 정선지점의 유량-유사량 관계식으로부터 향후 50년의 일유량($m^3/s$) 자료를 이용하여 총유사량를 산정하였다. 또한, 경험적 면적감소법을 이용하여 임의의 기간에 대한 실측치와 모의치 각각에 대한 퇴사분포 및 퇴사량을 산정 및 평가하였다. 이를 통해 효율적인 용수관리를 위한 저수지 퇴사관리 방안의 시기별 도출이 가능하였다.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.223-232
• /
• 2021

In general, stormwater flows to the road surface, especially in urban areas, and it is discharged through the drainage grate inlets on roads. The appropriate evaluation of the road drainage capacity is essential not only in the design of roads and inlets but also in the design of sewer systems. However, the method of road surface flow analysis that reflects the topographical and hydraulic conditions might not be fully developed. Therefore, the enhanced method of road surface flow analysis should be presented by investigating the existing analysis method such as the flow analysis module (uniform; varied) and the flow travel time (critical; fixed). In this study, the algorithm based on varied and uniform flow analysis was developed to analyze the flow pattern of road surface. The numerical analysis applied the uniform and varied flow analysis module and travel time as parameters were conducted to estimate the characteristics of rainfall-runoff in various road conditions using the developed algorithm. The width of the road (two-lane (6 m)) and the slope of the road (longitudinal slope of road 1 - 10%, transverse slope of road 2%, and transverse slope of gutter 2 - 10%) was considered. In addition, the flow of the road surface is collected from the gutter along the road slope and drained through the gutter in the downstream part, and the width of the gutter was selected to be 0.5 m. The simulation results were revealed that the runoff characteristics were affected by the road slope conditions, and it was found that the varied flow analysis module adequately reflected the gutter flow which is changed along the downstream caused by collecting of road surface flow at the gutter. The varied flow analysis module simulated 11.80% longer flow travel time on average (max. 23.66%) and 4.73% larger total road surface discharge on average (max. 9.50%) than the uniform flow analysis module. In order to accurately estimate the amount of runoff from the road, it was appropriate to perform flow analysis by applying the critical duration and the varied flow analysis module. The developed algorithm was expected to be able to be used in the design of road drainage because it was accurately simulated the runoff characteristics on the road surface.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.8
• /
• pp.403-410
• /
• 2016

During expressway construction it has been input a lot of material, but it does not manage to estimate quantitatively. In this study, the total material requirement for construction of expressway, which separated direct material requirement and indirect material requirement each section was quantified by combining life cycle assessment (LCA) and material flow analysis (MFA). In the direct material requirement, sand 2.27E + 04 ton/km, limestone 1.02E + 04 ton/km and gravel 4.47E + 03 ton/km were required, in the indirect material requirement, gravel 2.75E + 04 ton/km, iron 9.80E + 03 ton/km and coal 9.74E + 03 ton/km were required. Material such as sand, limestone which has high direct material requirement is require of excess input prevention from construction site, and material such as iron, rare metals(chrome, nickel) and coal which has high indirect material requirement is require additional studies of resource management.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.5
• /
• pp.364-370
• /
• 2009

With time, the stable management of turbidity is becoming more important in the water treatment process. So optimization of flocculation is important for the improvement of the sedimentation efficiency. we evaluated the hydrodynamic behavior in the rotation direction (clock-wise, counterclock-wise) of the flocculator in the flocculation basin using Computational Fluid Dynamics (CFD). The results of the CFD simulation, in cases where flocculators rotate in a clockwise direction, a stronger flow is formed near the surface of the water where the rotating direction and current of flow correspond. The variance and standard deviation of the flux are about 8.5 and 2.9 respectively. In contrast, in the case of a counterclockwise direction, a stronger flow is formed near the bottom of the basin. The variance and standard deviation of the flux are about 5.3 and 2.3, respectively. The effluent flux is affected more by the third flocculator spin than the first and second flocculator spins. The third flocculator spinning in the counterclockwise direction is better for the uniform flow of the sedimentation basin than the third flocculator spinning in the clockwise direction

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.11-20
• /
• 2008

The spillway type of small and midsize dams in Korea is almost overflow weir. To examine flood control capacity of overflow spillway, FLOW-3D was applied to Daesuho dam and analysis was focused on the discharge of dam spillway by changing weir shape. Overflow phases and discharges of linear labyrinth weir and curved labyrinth weir were compared with those of existing linear ogee weir. Hydraulic model experiment was performed to verify numerical result. Verification results showed that overflow behaviors and flow characteristics in the side channel by hydraulic model experiment and numerical simulation are well matched, and water surface elevation at side wall coincides with each other. When the reservoir elevation was increased up to design flood level, in case of the linear ogee weir the flow over the crest ran through smoothly in the side channel, whereas in cases of linear labyrinth weir and curved labyrinth weirs, the flow discharge was increased by 40 cms, and the flow over the weir crest, rotating counter-clockwise, was submerged in the side channel. The results of the water level-discharge curve revealed that labyrinth weir can increase discharge by 71% compared to the discharge of linear ogee weir at low reservoir elevation since it can have longer effective length. But as water surface elevation rises, the slope of water level-discharge curve of labyrinth weir becomes milder by submergence and nappe interference in the side channel.