• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.225-231
• /
• 2016

Glasshouse heating package technologies to improve energy usage efficiency in winter were developed. Heating package was composed of the ground water source heat pump with heating capacity of 105kW, the aluminum multi-layer thermal curtain with six layers of different materials and the root zone local heater with XL pipes of ${\phi}20mm$. Venlo type glasshouse($461m^2$) with the heating package was compared with the same type and area control glasshouse with the light oil boiler, the usual non-woven fabric thermal curtain with respect to the glasshouse inside temperature, relative humidity, crop growth, and heating energy consumption. The results of test in paprika cultivation glasshouses showed that the air temperature inside glasshouse with aluminum multi-layer thermal curtain was maintained $2.2^{\circ}C$ higher than that of control glasshouse in un-heating night time and the temperature in bed with root zone local heating was $4.7^{\circ}C$ higher than that in bed without local heating. Average heating coefficient of performance(COP) of the ground water source heat pump used in paprika cultivation was 3.7 and the glasshouse inside temperature was maintained at $21^{\circ}C$ of heating set up temperature. The heating energy consumptions per 10a were measured at 14,071L of light oil and 364kWh of electric power for the control glasshouse and 35,082kWh for the glasshouse applied heating package. As results, the heating cost of the glasshouse applied heating package was 87 percent lower than that of control glasshouse. The growths of paprika in glasshouses of control and applied heating package did not show any significant difference.

• Journal of Internet Computing and Services
• /
• v.18 no.1
• /
• pp.77-88
• /
• 2017

Recently, with the advent of knowledge based society where information and knowledge make values, patents which are the representative form of intellectual property have become important, and the number of the patents follows growing trends. Thus, it needs to classify the patents depending on the technological topic of the invention appropriately in order to use a vast amount of the patent information effectively. IPC (International Patent Classification) is widely used for this situation. Researches about IPC automatic classification have been studied using data mining and machine learning algorithms to improve current IPC classification task which categorizes patent documents by hand. However, most of the previous researches have focused on applying various existing machine learning methods to the patent documents rather than considering on the characteristics of the data or the structure of patent documents. In this paper, therefore, we propose to use two structural fields, technical field and background, considered as having impacts on the patent classification, where the two field are selected by applying of the characteristics of patent documents and the role of the structural fields. We also construct multi-label classification model to reflect what a patent document could have multiple IPCs. Furthermore, we propose a method to classify patent documents at the IPC subclass level comprised of 630 categories so that we investigate the possibility of applying the IPC multi-label classification model into the real field. The effect of structural fields of patent documents are examined using 564,793 registered patents in Korea, and 87.2% precision is obtained in the case of using title, abstract, claims, technical field and background. From this sequence, we verify that the technical field and background have an important role in improving the precision of IPC multi-label classification in IPC subclass level.

• Sleep Medicine and Psychophysiology
• /
• v.18 no.1
• /
• pp.40-44
• /
• 2011

Narcolepsy is a sleep disorder, which is characterized by excessive daytime sleepiness (EDS) that is typically associated with cataplexy, sleep fragmentation and other REM sleep-related phenomenon such as sleep paralysis and hypnagogic hallucination. Narcoleptic symptoms can be developed from various medical or neurological disorders. A 17-year-old male patient admitted for the evaluation of EDS which started three-month ago. He slept more than 18 hours a day with cataplexy and hypnagogic hallucination. He was obese with body mass index (BMI) of 30.4 kg/$m^2$. After admission he was newly diagnosed to the thyrotoxicosis. T3 391.2 ng/dL (60-181), free T4 4.38 ng/dL (0.89-1.76), TSH <0.01 ${\mu}IU$/mL (0.35-5.5) were measured. His pulse rate ranged 70-90 beats per minute and blood pressure ranged 150/100-120/70 mmHg. Polysomnography revealed many fragmentations in sleep with many positional changes (81 times/h). Sleep onset latency was 33.5 min, sleep efficiency was 47.9%, and REM latency from sleep onset was delayed to 153.6 min. REM sleep percent was increased to 27.1%. Periodic limb movement index was 13.4/h. In the multiple sleep latency test (MSLT), average sleep latency was 0.4 min and there were noted 3 SOREMPs (Sleep Onset REM sleep period) on 5 trials. We couldn't discriminate the obvious sleep-wake pattern in the actigraph and his HLA DQB1 $^*0602$ type was negative. His thyroid function improved following treatment with methimazole and propranolol. Vital sign maintained within normal range. Cataplexy was controlled with venlafaxine 75 mg. Subjective night sleep continuity and PLMS were improved with clonazepam 0.5 mg, but the EDS were partially improved with modafinil 200-400 mg. Thyrotoxicosis might give confounding role when we were evaluating the EDS, though sleep fragmentation was one of the major symptoms of narcolepsy, but enormous amount of it made us think of the influence of thyroid hormone. The loss of sleep-wake cycle, limited improvement of EDS to the stimulant treatmen, and the cataplexy not supported by HLA DQB1 $^*0602$ should be answered further. We still should rule out idiopathic hypersomnia and measuring CSF hypocretin level would be helpful.

• Journal of KIISE:Software and Applications
• /
• v.31 no.10
• /
• pp.1332-1344
• /
• 2004

Upon development of information super-highway and multimedia-related technoiogies in recent years, more efficient technologies to transmit, store and retrieve the multimedia data are required. Among such technologies, firstly, it is common that the semantic-based image retrieval is annotated separately in order to give certain meanings to the image data and the low-level property information that include information about color, texture, and shape Despite the fact that the semantic-based information retrieval has been made by utilizing such vocabulary dictionary as the key words that given, however it brings about a problem that has not yet freed from the limit of the existing keyword-based text information retrieval. The second problem is that it reveals a decreased retrieval performance in the content-based image retrieval system, and is difficult to separate the object from the image that has complex background, and also is difficult to extract an area due to excessive division of those regions. Further, it is difficult to separate the objects from the image that possesses multiple objects in complex scene. To solve the problems, in this paper, I established a content-based retrieval system that can be processed in 5 different steps. The most critical process of those 5 steps is that among RGB images, the one that has the largest and the smallest background are to be extracted. Particularly. I propose the method that extracts the subject as well as the background by using an Image, which has the largest background. Also, to solve the second problem, I propose the method in which multiple objects are separated using RGB channel selection techniques having optimized the excessive division of area by utilizing Watermerge's threshold value with the object separation using the method of RGB channels separation. The tests proved that the methods proposed by me were superior to the existing methods in terms of retrieval performances insomuch as to replace those methods that developed for the purpose of retrieving those complex objects that used to be difficult to retrieve up until now.

• Economic and Environmental Geology
• /
• v.39 no.2 s.177
• /
• pp.129-149
• /
• 2006

Previously published stratigraphic, sedimentologic, paleontologic, paleomagnetic and geophysical data are reviewed to make an understanding on the tectonic evolution of the Cretaceous Gyeongsang (Kyongsang) basin, southeast Korea. A stratigraphic framework and a tectonic model on the formation and deformation of the Gyeongsang Basin are newly proposed on the basis of integration these data with magmatism and mineralization ages in the basin. A newly proposed stratigraphic framework indicates that strata in the basin can be subdivided into five distinct stratigraphic units that represent pre-rifting, syn-rifting, inversion I, II, and III stages. The Gyeongsang Basin was formed initially as a pre-rifting stage due to north-south extension in the Late Jurassic prior to a syn-riftins stage that resulted from east-west extension during the Early Cretaceous. In the Late Cretaceous, the basin was deformed by three-staged sequential deformation of north-south, northwest-southeast, and east-west compressions. The tectonic history of the basin has been largely controlled by the change of motion of the Izanagi Plate from north to northwest during the Cretaceous. In the early Cretaceous, the Izanagi Plate began to subduct northward beneath the Eurasian Plate and caused the left-lateral strike-slip fault systems in the southern part of the peninsula. The left-lateral wrenching of these fault systems was causally linked to development of pull-apart basins, such as the Gyeongsang Basin in the southeastern part of the peninsula. However, northwestward movement of the Izanagi Plate during the Late Cretaceous probably led to the extensive volcanism as well as sequential deformations in the basin. The stratigraphic and tectonic model, which is newly proposed as a result of this study, may be expected to enhancing the efficiency for exploration and exploitation of useful mineral resources in the basin as well as establishing geologic history in the Cretaceous Gyeongsang Basin. Together with the spatial and temporal correlation of the Cretaceous basins in adjacent areas, this stratigraphic and tectonic model provides a new geologic paradigm to delineate the sophisticated tectonic history of East Asia turing the Cretaceous.

• Journal of Embryo Transfer
• /
• v.21 no.2
• /
• pp.137-146
• /
• 2006

The objective of this study was to examine the effect of donor cell types, the source of recipient oocytes and estrous synchronization on pregnancy and delivery rates of somatic cell nuclear transfer (SCNT) embryos in Korean native goats. Recipient oocytes were surgically collected after superovulation. Ear cells and fetal fibroblasts were collected and cultured in serum-starvation condition (TCM-199 + 0.5% FBS) for cell confluence. The zonae pellucidae of in vivo- and in vitro-matured oocytes were partially drilled using a laser system. Single somatic cell was transferred into the enucleated oocyte. The reconstructed oocytes were electrically fused with 0.3 M mannitol. After the fusion, embryos were activated by Ionomycin+6-DMAP. NT embryos were cultured in mSOF medium supplemented with 0.8% BSA at $39^{\circ}C$ in an atmosphere of 5% $CO_2$, 5% $O_2$, 90% $N_2$ for 12 to 20 hr. One hundred and two SCNT embryos were transferred into 20 recipients and pregnancy rate at days 30 was 20.0%. Of them, one developed to term and delivered 1 kid. Ear cells showed significantly higher fusion (63.8 vs. 26.5%) and pregnancy rates (20.0 vs. 0.0%) than those of fetal fibroblast (p<0.05). The recipients synchronized by CIDR showed significantly lower pregnancy rates compared to that of recipient in natural estrus ($0.0{\sim}25.0%$ vs. 100%) (p<0.05). Cloned kid was born from the recipient in natural estrus. For the synchronization of estrus between recipient and donor, there was no difference between treatments (${\pm}0$ vs. +12 hr) in pregnancy rate. The first healthy cloned kid (Jinsoonny) was produced by transfer of SCNT embryos derived from in vivo oocytes and ear cells into a recipient goat whose estrus was synchronized with the donor. These results imply that donor cells for nuclear transfer may affect the success rate, and the estrus synchronization between donor and recipient animals can also be important.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.265-271
• /
• 2015

This study has an objective not only to be helpful to the understanding about students' career and employment preparation by investigating the present conditions which are related with vocational consciousness and job values of dental hygiene department graduating students. Study subjects were 350 female graduating students in 3-year-course College, dental hygiene department at five areas of Seoul, Gyeonggi, Gangwon and Gyeongnam. Data were analyzed using IBM SPSS Statistics ver. 19.0. Regarding job values, job prospect of dental hygienist is a little developmental (55.2%) and institution hoping to work is dental clinic (43.2%), reasons for employment in major area are good wage and working environment (24.0%). And regarding opinion about job, dental hygienist job is a measure for living income (69.7%). Regarding job selection conditions, 35.0% subjects replied good human relationship. In the questionnaires regarding professional job in vocational consciousness category, results showed high percentages in that 'the occupation is a job in charge of oral health improvement'; regarding academic area, 'scaling should be done better than dentist'; regarding human relationship, 'harmony between colleagues is closely related with job efficiency'; regarding work ethics, 'development of dental hospital (clinic) and dental hygienist is correlated.' In vocational consciousness of study subjects, higher major satisfaction showed significant differences in professional job consciousness and work ethics consciousness (p<0.05) and the correlation results in vocational consciousness areas showed all statistically significant correlations (p<0.01). In case that the characteristic in one type is higher among 4 types, all other types showed high characteristics and also showed high general vocational consciousness.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.65-72
• /
• 2010

General anesthesia has been researched and developed in dentistry as on type of management technique to sedate patients who may be uncontrollable or require medical consideration. There has been continuous research into this area, but analysis of large set of patients over a sustained period of time is lacking. Thus, this study analyzes the records of patients who received general anesthesia at the Yonsei University Dental Hospital Department of Pediatric and Clinic for the Disabled. 1. Patient's age ranged from 1 to 66, with under 5 being the largest group with 410 members(38.5%). The study included more men than women, with 695 male members(65.3%). 2. Type of dental procedure performed were as follows(per person) : 5.6 Dental restoration; 2.3 Endodontic treatment of deciduous and primary teeth; 2.5 preformed crowning; and 1.6 extractions. Procedures took an average of 100 minutes. 3. 1022 patients(95.9%) received dental care under general anesthesia once and 43 patients(4.1%) received dental care under general anesthesia two or more times. Dentistry under general anesthesia has the many benefit. However, without appropriate post-treatment care, it is difficult to maintain good oral health. Therefore, it is important to improve the efficiency and safety of general anesthesia through future research.

• 선박안전기술공단연구보고서
• /
• s.4
• /
• pp.1-108
• /
• 2007

2007. 7. 23 IMO의 NAV(항해안전전문위원회)53차 회의에서는 e-Navigation을 해상에서의 안전, 보안, 해양환경보호를 목적으로 전자적인 수단에 의해 선박과 육상에서 해양정보를 수집, 교환, 표시함으로써 항구와 항구간의 항해 및 관련된 서비스를 향상시키는 것으로 정의하고 있다.2005년 11월 영국의 교통부 장관 Stephen 박사는 Royal Institute ofNavigation에서의 연설에서 해상안전과 환경보호를 위하여 선박의 항해를 감시하는 관제소 및 항행하는 선박에 유용하고 정확한 정보가 더 많이 필요함을 역설하였다. 그리고 첨단 기술에 의해 자동화된 항공 항법분야를 예로들면서, 선박의 항법 분야도 항해와 관련된 모든 시설 및 작업을 전자적 수단으로 대체하는 개념인 e-Navigation으로 전환되어야 하며 영국은 이에 필요한 작업을 주도하겠다는 의견을 피력하였다. Stephen은 e-Navigation 도입으로 얻을 수 있는 이익으로 첫째, 항해 실수로 인한 사고 확률저감, 둘째,사고 발생 시 인명 구조 및 피해 확산을 위한 효율적 대응, 셋째, 전통적인항해시설 설치 불필요로 인한 비용 저감, 넷째 선박입출항 수속의 간편화 및항로의 효율적 운용으로 인한 상업적 이익 등을 들었다. 반면에e-Navigation 체계로 전환 시 예상되는 장애로는 첫째, 체계 구축을 위한 비용(특히 개발도상국가들의 경우 어려움 예상), 둘째, e-Navigation의 성과 달성을 위하여 세계 전 해역의 모든 선박이 e-Navigation 체계에 동참하도록유도하는 문제, 셋째, 전자해도 표시 및 선교 장비들에 대한 표준화 문제, 넷째, 육상에 설치할 e-Navigation 센터의 설계 및 구축 등을 꼽았다.IMO는 2005년 81차 MSC(해사안전위원회) 회의에서 영국이 일본, 마샬아일랜드, 네덜란드, 노르웨이, 싱가포르, 미국과 공동으로 제안한 ‘e-Navigation전략 개발’ 의제를 2006년 82차 MSC 회의에서 채택하고, NAV(항해 전문위원회)를 통하여 2008년까지 e-Navigation의 구체적 개념을 정립하고 향후 개발하여야 할 전략적 비전과 정책을 수립하기로 하였다. 이어서 영국을 의장으로 e-Navigation 전략개발 통신작업반이 구성되었는데, 지난 년간 19개국, 16개 전문기관이 참여하여 아래의 작업이 수행되었다. ○ e-Navigation 개념의 정의와 목적 ○ e-Navigation에 대한 핵심 이슈 및 우선 순위 식별 ○ e-Navigation 개발에 따른 이점과 단점의 식별 ○ IMO 및 회원국 등의 역할 식별 ○ 이행계획을 포함한 추가 개발을 위한 작업계획의 작성 IMO에서 수행되고 있는 e-Navigation 전략 개발 의제 일정은 2008년까지이다. 이 전략 개발에 있어서 중요한 요소는 e-Navigation이 포함할 서비스범위, 포함하는 서비스 제공에 필요한 인프라 및 장비의 식별, 인프라 구축및 운용비용을 부담할 주체에 대한 논의, e-Navigation으로 인한 이익과 투자비용에 대한 비교 분석 등이다. 이 과정에서 정부, 선주, 항만운영자, 선원등의 입장 차이와 선진국과 개발도상국 간의 경제 수준 차이는 전략 개발에있어 큰 어려움을 줄 것이므로, 이들이 합의된 전략을 만들기 위해서는 예정된 기간보다 다소 늦어질 가능성도 있다.e-Navigation 전략 개발이 완료되면 1단계로는 해상교통 관제시스템, 선박선교 장비, 무선 통신장비 등에 대한 표준화 작업이 이루어질 것이다. 이 과정에서 각국 간에 자국 보유 기술을 표준화시키기 위한 경쟁이 치열할 것으로 예상된다. 2단계에서는 e-Navigation 체계 하에서의 다양하고 풍부한 서비스 제공을 위한 관련 소프트웨어 및 하드웨어의 개발이 이루어질 것으로전망되는데, 이는 지난 10년간 육상에서 인터넷망 설치 후 이루어진 관련 서비스 산업의 발전을 돌아보면 쉽게 짐작할 수 있을 것이다.e-Navigation 체계 하에서 선박의 항해는 현재와는 전혀 다른 패러다임으로 바뀔 것이다. 예를 들어 현재 입출항 시 요구되던 복잡한 절차는one-stop 쇼핑 형태로 단순화되고, 현재 선박 중심의 항해에서 육상e-Navigation 센터가 적극적으로 관여하는 항해 체계로 바뀔 것이며, 해상정보의 공유와 활용이 무선 인터넷을 통해 보다 광범위하게 이루어질 것이 다.e-Navigation의 잠재적 시장 규모는 선박에 새로이 탑재될 지능형 통합 항법시스템 구축과 육상 모니터링 및 지원 시스템 등 직접 시장이 약 50조원,전자해도, 통신장비, 관련 서비스 컨텐츠 등 간접 시장의 규모가 150조원으로 총 200조원으로 대략 추산하고 있다. 향후 이 거대한 시장을 차지하기 위한 전략 수립이 필요한 시점이다. 지금까지 항해 장비 관련 산업은 선진국의일부 업체들에 의해 독점되어 왔다. 우리나라는 조선과 해운에서 모두 선진국임에도 불구하고 이 분야에서는 대부분 수입에 의존해 왔다. e-Navigation체계 하에서는 전체 시장이 커지고 장비의 사양이 표준화됨에 따라 어느 소수 업체가 현재처럼 독점하기는 더 이상 어려울 것으로 예상된다. 따라서e-Navigation은 우리나라도 항해 장비 분야 시장을 차지할 수 있는 좋은 기회라고 할 수 있다. 특히 조선 1위의 장점을 적극 활용한다면 다른 나라보다우위의 경쟁력을 확보할 수도 있다. 또한, 서비스 분야의 시장은 IT 기술과밀접한 관계가 있으므로 IT 강국인 우리나라가 충분한 경쟁력을 갖고 있다고 할 수 있다.그러나, EU를 비롯한 선진국에서는 이미 e-Navigation 에 대비한 연구를10여년 전부터 수행해 왔다. 앞에서 언급한 EU의 MarNIS 사업은 현재 거의마무리 단계로 당장 실용화 할 수 있는 수준에 있는 것으로 보인다. 늦었지만 우리도 이를 따라잡기 위한 연구를 서둘러야 할 것이다. 국내에서도e-Navigation의 중요성을 깊이 인식하고, 2006년에는 관련 산학연 전문가들로 작업반을 구성하여 워크숍 등을 개최한 바 있다. 또한 해양수산부에서도e-Navigation 핵심기술 개발을 위한 연구사업을 기획 추진하고 있다.그러나 현재 항해통신장비들의 기술기준은 ITU의 전파규칙(RR)과 IMO결의 및 SOLAS 협약을 따르고 있는데 이들 규약이나 결의에 대한 국제적인 추이와 비교할 때 국내의 기술은 표준화되지 못한 부분이 많은 실정이다.본 연구에서는 e-Navigation sytem중 표준화가 필요한 요소와 전자해도,AIS 등 e-Navigation(통합전자항법시스템)관련 국내산업현황 실태조사를 통해 국내 e-Navigation기술개발 동향에 대해 조사하고자 한다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.1
• /
• pp.88-95
• /
• 2002

In recent years, the security of hardware and software systems is one of the most essential factor of our safe network community. As elliptic Curve Cryptosystems proposed by N. Koblitz and V. Miller independently in 1985, require fewer bits for the same security as the existing cryptosystems, for example RSA, there is a net reduction in cost size, and time. In this thesis, we propose an efficient hardware architecture of underlying field arithmetic processor for Elliptic Curve Cryptosystems, and a very useful method for implementing the architecture, especially multiplicative inverse operator over GF$GF (2^m)$ onto FPGA and futhermore VLSI, where the method is based on optimized unit operation components. We optimize the arithmetic processor for speed so that it has a resonable number of gates to implement. The proposed architecture could be applied to any finite field $F_{2m}$. According to the simulation result, though the number of gates are increased by a factor of 8.8, the multiplication speed We optimize the arithmetic processor for speed so that it has a resonable number of gates to implement. The proposed architecture could be applied to any finite field $F_{2m}$. According to the simulation result, though the number of gates are increased by a factor of 8.8, the multiplication speed and inversion speed has been improved 150 times, 480 times respectively compared with the thesis presented by Sarwono Sutikno et al. [7]. The designed underlying arithmetic processor can be also applied for implementing other crypto-processor and various finite field applications.