• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.231-234
• /
• 2011

Recently, the smart RFID tag technology which can measure external changing environment is globally interesting. In this paper, development of the Smart RFID tag using temperature sensor was represented. Smart RFID tag is basically comprised of antenna which has its bandwidth of 13.56Mhz, temperature sensors and data processing controller. Antenna design and smaller PCB production can be used to agri-food wrap. Since the smart RFID tag is distributed as an attachment to agri-food wrap, consumer can check temperature changes in the distribution process. Because temperature change check in real time, food confirm the status of transportation and the freshness. Also, smart RFID tag can be applied to proposed smart refrigerator.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.337-343
• /
• 2013

To ensure the safety for vessels anchored in stormy weather, duty officer and VTS operator have to frequently check whether their anchors are dragging. To judge dragging of the anchored vessel, it is important for VTS operator to recognize the turning circle and its center of the anchored vessel. The judgement for the anchored vessel dragging can be made by using Radar and AIS. If it is available, CCTV or eye-sighting can be used to know the center of turing circle. However, the VTS system collects individual ship's dynamic information from AIS and ARPA radar and monitors of the anchored vessels, it is difficult for VTS operator not only to get the detailed status information of the vessels, but also to know the center of turning circle. In this study, we propose an efficient algorithm to estimate the center of turning circle of anchored vessel by using the ship's heading and position data, which were from AIS. To verify the effectiveness of the proposed algorithm, the experimental study was made for the anchored vessel under real environments.

• Journal of Information Management
• /
• v.39 no.2
• /
• pp.211-234
• /
• 2008

Recently, the frequency and scale of natural disasters such as typhoons, flood, earthquakes, and tidal waves from earthquakes has been increasing. Several nations have recognized that earth observation is essential for protecting the Earth's environment. However, as the data format from earth observation varies depending on areas, institutes, and countries, sharing and exchange between data is difficult. Thus, we have a metadata standardization scheme suitable for the domestic situation to allow exchange of data between societal benefit areas with reference to principles of data sharing and exchange that are discussed on GEO (Group on Earth Observation). We have also designed metadata schemes required to identify the metadata situation of earth observation data being used for 9 societal benefit areas of GEOSS(Global Earth Observation System of Systems).

• Journal of the Korean association of regional geographers
• /
• v.8 no.1
• /
• pp.20-39
• /
• 2002

The purpose of this study is to analyze the characteristics of a life cycle of a theme park through looking at Everland in Yongin, Korea. The life cycle of Everland is divided into four stages. In "initial development" stage(1976 - the mid-80's), Everland become inclined the characteristics of an amusement park by constructing the amusement facilities in the Flower Center(botanical garden). In "growth" stage(the mid-80's - the early 90's), Everland had full grown to the amusement park and inclined to a theme park. In "maturity" stage(the early 90's - the mid-90's), many visitors were not motivated to re-visit Everland because the facilities and events did not change often. Therefore, Everland makes plans for multiple theme park. In "rejuvenation" stage(after the mid-90's), Everland has practiced the plans for multiple theme park and has become the family and accommodating-oriented theme resort park. Since 1976 when Everland was opened, it has evolved from an amusement park to a theme park by creating various and continuous innovations in facilities and events.

• Journal of the Korean association of regional geographers
• /
• v.22 no.4
• /
• pp.843-855
• /
• 2016

The objective of this study is to find out geomorphological characteristics of historical ruins where people produced and consumed large jar coffins excavated in the Yeongsan river basin using Fluvio-Marine Plains from detailed soil map. For this purpose, we chose the 21 consumption sites. The results are as follows. 21 consumption sites located in the region of upper limit of tidal internal in Yongsan River and tributary rivers. Among these, 18 Consumption sites has high accessibility with Fluvio-marine plains. This means that Consumption remains of Yongsan River basin have been located to area available for distribution from production sites.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.787-790
• /
• 2008

The SWAT(Soil and Water Assesment Tool) is a relatively large scale model for the complicated watershed or river basin. The model was developed to predict the effect of land management practices on water, sediment and agricultural chemical yields in large complex watershed with varying soils, land use and management conditions over long periods of time. Usually streams are divided into urban stream and natural stream in accordance with the development level. In case of urban stream, according to urbanization, as impermeable areas are increasing due to the change of land use condition and land cover condition, dry stream phenomenon at urban stream is rapidly progressed. In this study, long term run-off simulations in urban stream are performed by using SWAT model. Especially, the model is applied in small scale water shed, Joman River basin. The optimization by the sensitivity analysis is also performed for the model parameter estimations.

• Archives of design research
• /
• v.17 no.1
• /
• pp.63-76
• /
• 2004

Although information design principles had originated from the graphic design field including publishing design in 1970s, information design have taken one of the most important positions in multimedia design fields as the present since Richard Saul Wurmn started his researches on information design and its practical application on internet environments. However, relatively little researches have been performed for building identity of information design in multimedia design fields so far and moreover in some cases, information design is likely to be narrowly viewed as 'the representation of a piece of information and its visualization' which was defined in traditional graphic design field. This research circumstance leads the study to investigate characteristics of information design in current multimedia design with contingent perspective which is compared to the traditional information design. The study results suggest 5 characteristics of information design including 'suggesting context & finding out information hierarchy', 'access of integrated consideration & share of information control', 'using of multi-dimensional media & content first', 'stabilization of information quality & combinational understanding of meaning', 'bilateral information representation & user's knowledge expansion'. Future researches, based on the results of the study, are expected to be expanded to a degree with argument for inter-dependent and/or exclusive characteristics of adjacent fields of information design such as interface design, interaction design and experience design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.735-741
• /
• 2018

In this paper, the surface recession of ablative materials was quantitatively analyzed using a high-speed camera and a three-dimensional profilometer. The ablation tests of the graphite and carbon/phenolic composite samples were performed using a 0.4 MW arc-heated wind tunnel for simulating the atmospheric re-entry environment. The real-time images during the ablation test were captured by the high-speed camera, and analyzed to calculate the surface recession and recession rate. Also, the surface data of samples were obtained using a three-dimensional profilometer, and the surface recession was precisely calculated from the difference of height between the surface data before and after the test. It is effective to complement the two measurement results in the comprehensive analysis of surface recession phenomena.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.377-388
• /
• 2020

In this paper, the autonomous mobile robot whit only LRF sensors proposes an algorithm for avoiding moving obstacles in an environment where a global map containing fixed obstacles. First of all, in oder to avoid moving obstacles, moving obstacles are extracted using LRF distance sensor data and a global map. An ellipse-shaped safety radius is created using the sum of relative vector components between the extracted moving obstacles and of the autonomuos mobile robot. Considering the created safety radius, the autonomous mobile robot can avoid moving obstacles and reach the destination. To verify the proposed algorithm, use quantitative analysis methods to compare and analyze with existing algorithms. The analysis method compares the length and run time of the proposed algorithm with the length of the path of the existing algorithm based on the absence of a moving obstacle. The proposed algorithm can be avoided by taking into account the relative speed and direction of the moving obstacle, so both the route and the driving time show higher performance than the existing algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1789-1794
• /
• 2009

In the present study, the cooling performance characteristics on environment changes of A/C applied fin-tube and PF heat exchangers were experimentally investigated. Capacity and COP on an air velocity, an indoor/outdoor temperature and an indoor/outdoor relative humidity were obtained. Fin types of PF heat exchanger were a triangler and squarer form. The experimental data for the three kinds of heat exchangers were measured using the air-enthalpy calorimeter. Performance of PF A/C was more excellent than that of a fin-tube A/C. Also, the performance of PF-2 A/C with the squarer fin was more excellent than that of PF-1 A/C with the triangler fin. As the air velocity, the indoor temperature and the indoor relative humidity increase, capacity and COP increase. And as outdoor temperature increases, capacity and COP decrease. But, the performance change on the outdoor relative humidity was insignificant.