• Journal of Radiation Protection and Research
• /
• v.29 no.3
• /
• pp.205-212
• /
• 2004

Three-dimensional wind field and atmospheric dispersion models have been developed for estimating the concentration distributions of radioactive materials released into atmosphere. The field tracer experiment near the Kori nuclear power plant located over complex terrain was carried out for validating the atmospheric dispersion model. The wind fields were one of the most important factors for calculating the concentration. Therefore several numerical simulations using the measured wind data were performed to get more accurate concentration distributions compared with the analyzed values of the tracer gas. The calculated concentration distributions agreed well in the case of the usage of the more measured wind data in wind field model.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.621-628
• /
• 1997

Excavation works on stream beds have been done for various reasons including aggregate collection, sediment dredging, bridge constructions, or laying pipes under the ground. These activities may cause significant loadings of SS (suspended solids) resulting in water pollution and other detrimental effects to the surrounding environment. This research investigates application potential of a fickian diffustion model, derived from two dimensional advection-diffusion equation through some simplifying assumptions, as a planning tool for the estimation of SS loadings from excavation works and evaluation fo pollution prevention measures in case that sophisticated numerical simulation models are not applicable due to various practical reasons. Through a case study of the Juncheon stream in the Donghae City on the Kangwondo Province, this study demonstrates applicability of the fickian diffustion model as a practical method for the preliminary estimation of Ss loadings from excavation works and evaluation of performance of fabrics made of synthetic fiber for the reduction of downstream SS concentration with deficient field data.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.6
• /
• pp.572-581
• /
• 1991

For the development of a model to predict absorbed salt quantity in radish during salting, absorbed salt quantity and water content change in radish by the hour were measured at 5%, 10%, 15% brine concentration and $10^{\circ}C,\;20^{\circ}C,\;30^{\circ}C$ respectively. Absorbed salt quantity in radish by the time showed logarithmic function, absorbed salt quantity by brine concentration and temperature showed linear relation. A model to predict absorbed salt quantity in radish at each time, brine concentration and temperature was calculated by the regression program of SPSS. Apparent diffusivity of salt in radish was calculated from appropriated diffusion equation solution of Fick's second law using computer simulation. Salt diffusivity in radish increased as brine concentration increased and the effect of temperature could by expressed by Arrhenius equation. A model equation which could predict salt diffusivity was developed by regression analysis. To specify relation between salt quantity which absorbed into radish and water content which removed out of it, Flux ratio(${\Delta}W/{\Delta}S$) was calcuated. The values showed that the removed water content was greater than the absorbed salt quantity.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.178-179
• /
• 2000

최근 들어 인체에 무해하고 대기 중에서 화학반응을 일으키지 않는 추적기체를 이용한 확산실험을 통해 기존의 대기오염 확산모델 등에 대한 평가 및 개선이 많이 이루어지고 있으며, 특정 지형을 대상으로 한 확산실험도 종종 이루어지고 있다. 도시지역에서의 오염물질의 이동과 확산은 오염물질의 농도뿐만 아니라 인근 도시에까지 영향을 미치게 되므로 매우 중요한 과정이다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.200-202
• /
• 2000

도시지역에서의 오염물질의 이동과 확산은 오염물질의 농도뿐만 아니라 인근 도시에까지 영향을 미치게 되므로 매우 중요하다. 이에 최근 들어 인체에 무해하고 대기 중에서 화학반응을 일으키지 않는 추적기체를 이용한 확산실험을 통해 기존의 대기오염 확산모델 등에 대한 평가 및 개선이 많이 이루어지고 있으며, 특정 지형을 대상으로 한 확산실험도 종종 이루어지고 있다. (중략)

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.48-56
• /
• 1999

In this paper, we have investigated experimentally the effects of initial oxygen concentration on oxygen pileup phenomenon and the diffusion of implanted impurities. 1.2 MeV $^{11}B^{+}$ and 2.2 MeV $^{31}P^{+}$ ions were implanted into p-type (100) Si wafers with a dose of 1${\times}10^{15}$ / $\textrm{cm}^2$. Secondary ion mass spectrometry(SIMS) measurements were carried out to obtain depth distribution profiles for implanted impurities and oxygen atoms after two-step annealing of $700^{\circ}C$(20 hours)+$1000^{\circ}C$(10 hours). Residual secondary defect distribution and annealing behabiour were also studied by cross-sectional transmission electron microscopy(TEM) observations. Oxygen pileup nearly $R_p$(projected range) were observed by SIMS measurements and considerable amount of residual secondary defect layer were observed by TEM observations. It can be seen that oxygen atoms are trapped at the secondary defects by the experimental results. Enhanced diffusions of boron and phosphorus to the bulk direction were observed with the increasing of initial oxygen concentration.

• Korean Journal of Optics and Photonics
• /
• v.23 no.3
• /
• pp.113-118
• /
• 2012

The concentration and hydrodynamic radius of nano-sized fluorescence particles diffusing in solution were compared by using fluorescence correlation spectroscopy (FCS), which can measure the variation of the correlation function of a fluorescence signal by size and number of particles. The used nano-sized fluorescence particles are Alex Fluor 647, quantum dots, and fluorescence beads, and three kinds of sample solutions with different concentrations were prepared by dilution to 1/10 and 1/100 with distilled water for each kind of particles. The effective focal volumes were calculated by using the known diffusion coefficient of Alexa Fluor 647 particles, and the diffusion time, number of particles in focal volume, and variation of concentration according to the dilution could be measured by the FCS system. Through this study, we determined that the concentrations of arbitrarily diluted sample solutions can be measured by a home-built FCS setup in the range of 0.1 nM ~ 10 nM and that the diffusion coefficient of the quantum dot was $27{\pm}1{\mu}m^2/s$.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.397-398
• /
• 2001

대형 석탄화력 발전소에서는 발전소 가동으로 인해 발생되는 주변 오염농도를 평가하기 위하여 주기적으로 현장조사를 실시하고 있다. 본 연구에서는 미국 환경보호청(EPA) 권장 모델중 하나인 ISCST-3를 이용하여 하동화력본부 주변의 확산 모델링을 수행하여 최고 농도 발생 지점을 조사하였고 환경 기준치와의 비교결과를 나타내었다. 또한 현장에서의 실제 조사결과와 비교하여 국내 지형 및 농촌지역에의 ISC-3의 적용성을 조사하였다. (중략)

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1991.07a
• /
• pp.51-54
• /
• 1991

산업화에 따른 환경문제는 그 심각성을 더해가고 있다. 수질오염도 예외는 아니며 하천, 지하수, 해양에 이르기까지 깨끗한 물을 유지, 공급하는 것이 최근 관심의 촛점이 되고 있다. 하천오염의 경우 상류에 위치한 오염원으로부터 멀어질수록 농도변화가 일어난다. 이러한 하류지점의 농도분포는 유량, 유하시간, 유하연장, 단면적 등 흐름에 관계되는 요소들과 혼합 및 확산에 관계되는 요소들에 주로 영향을 받는다.(중략)

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.217-223
• /
• 1991

A capillary method was used to evaluate the properties of mass transfer process and diffusion coefficients in the gel food. Amaranth dye was selected as a diffusant material to visualize the degree of diffusion procedure easily. After contacting cylinder containing agar gel with amaramth dye solution for some hours, the gel was cut to five segments by 0.5 cm in length. The diffusant concentration from the segments were measured by the spectrophotometer at 523 nm. Prediction models for the diffused quantities in gel food were established by the regression program of SPSS package program. Generally, diffusion coefficient can be calculated by Fick's second law, however, it will be determined by using numerical analysis method more easily. Finally the diffusion coefficients in this research were calculated by arithmetic mean of the measured values. As raising gel agent concentration, the mean diffusion coefficient tended to decrease because the obstruction effect came to become significant.