• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.425-431
• /
• 2010

The phase distribution in a multi-phase material strongly affects its material properties. Therefore, a proper method to describe the phase distribution of a material is needed. In this research, probability distribution functions, two-point correlation and lineal-path functions, are used to represent the probabilistic phase distributions of a material. The probability distribution function is calculated using a numerical method and is described as an analytical form via exponential curve fitting with three parameters. Application of analytical form of probability distribution function is investigated using two-phase polycrystalline solids and soil samples. It is confirmed that the probability distribution functions can be represented as an exponential form using curve fitting which helps identifying the applicability of a representative volume element(RVE).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1A
• /
• pp.31-37
• /
• 2012

The phase distribution in concrete materials strongly affects its material properties. It is important to identify the spatial distribution of void in concrete because the void in concrete materials affects mechanical behavior and permeability significantly. Therefore, a proper method to describe the void distribution of a material is needed. In this research, CT(computed tomography) is used to examine and to quantify the void distribution of porous concrete specimens. 3D concrete digital specimens are created by subsequent stacking of 2D cross-sectional images from CT. Then, probability distribution functions such as two-point correlation, lineal-path and two-point cluster functions are used for void distribution characterization. It is confirmed that probability distribution functions obtained from CT images are effective in characterizing void distributions including the anisotropy and percolation.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.33-43
• /
• 2006

This research is to the selection of optimal probability distribution as well as the estimation for design hourly factor in consideration of traffic characteristic, such as road function, lane number and AADT. To accomplish the objectives, we are applied to various probability distribution using traffic data that observed at permanent traffic count points in 2005. The parameters or the selected 14 probability distribution were estimated based on the method of maximum likelihood and the validity condition of the estimated parameter The goodness-of-fit test, such as chi-square test. was performed as well as the estimation of design hourly factor. As a result, An appropriate distributions of each case were selected : Pearson V for two lane of rural roads, LogLogistic for the four lane of rural roads, LogLogistic for the urban roads, Extreme value for recreation roads. And optimal K factor are as following : $0.1{\sim}0.2 $ for two lane of rural roads, $0.09{\sim}0.14$ for the four lane of rural roads. $0.07{\sim}0.13$ for the urban roads, $0.1{\sim}0.2$ for recreation roads.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1546-1550
• /
• 2009

최근 증가하고 있는 집중호우로 인해 피해 규모가 대형화 되어가고 있는 추세로 수공구조물 설계시 보다 정확한 수문분석을 요구 하고 있다. 강우의 시간분포는 정확한 수공구조물의 설계시 첨두홍수량 산정에 가장 중요한 영향을 미친다. 따라서 본 연구에서는 지역의 기상학적, 지형학적 특성에 맞는 적절한 강우분포형을 제시하고자 한다. 본 연구는 금호강권역의 단시간 강우에 대한 시간분포형을 결정하기 위하여 기존 강우의 시간분포방법 중에서 개념상 비교적 단순하면서도 물리적으로 의미를 갖는 Mononobe분포, Yen & Chow분포, Keifer & Chu분포의 방법을 이용하였다. 대상지점은 금호강권역의 가창으로 재현기간 50년의 6시간, 24시간 강우의 시간적 분포특성을 비교분석한 결과 6시간 확률강우량에서는 Mononobe 분포와 Keifer & Chu 분포의 첨두치가 비교적 크게 나타났고 24시간 확률강우량에서는 Keifer & Chu 분포의 첨두치가 가장 크게 나타났다. Yen & Chow 분포의 경우 6시간 강우의 첨두치에 비해 24시간 강우의 첨두치가 급격히 감소하는 것을 알 수 있다. 또한 확률강우를 이용해서 홍수유출량을 분석한 결과 6시간, 24시간의 첨두홍수량은 Keifer & Chu 분포가 가장 크게 나오는 것으로 나타났고 첨두시간 역시 Keifer & Chu 분포가 가장 빠른 것으로 나타났다. 최근 다양한 설계강우의 시간분포 방법들이 실제 강우분포의 특성을 표현하고 있지만 이러한 방법들 중에서 실제로 유역에 가장 적합한 시간분포 방법을 결정하기란 어렵다. 하지만, 첨두홍수량 결정을 위해서는 여러 가지 방법들 중 그 지역을 가장 대표할 수 있는 강우분포 방법을 선택해야만 한다. 따라서 분석지점 이외의 다양한 실제 지점에 대해 설계홍수량을 산정해 봄으로써 다른 설계강우의 시간분포 방법을 이용하여 산정한 결과의 비교 검토가 필요할 것으로 사료된다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.2
• /
• pp.112-120
• /
• 2010

In this paper time series wave data measured continuously for 24 hours during a storm in Yura Sea Area are used to investigate statistical characteristics of nonlinear waves. The exceedance probability of wave height is compared using the Rayleigh distribution and the Edgeworth-Rayleigh (ER) distribution. Wave data which show stationary state for 10 hours contain 4600 waves approximately. The Gram-Chalier distribution fits the probability of wave elevation better than the Gaussian distribution. The Rayleigh ($H_{rms}$) distribution follows the exceedance probability of wave height in general and predicts the probability of freak waves well. The ER distribution overpredicts the exceedance probability of wave heights and the occurrence of freak waves. If wave data measured for 30 minute period which contains 250 waves are used, the ER distribution can predict the occurrence probability of freak waves well. But it overpredicts the probability of overall wave height If no freak wave occurs, the Rayleigh ($H_{rms}$) distribution agrees well with wave height distribution for the most of wave height ranges. The wave height distribution of freak waves of which height are less than 10 m shows similar tendency compared with freak waves greater than 10 m. The value of $H_{max}/H_{1/3}$ is related to the kurtosis of wave elevation. It seems that there exists threshold value of the kurtosis for the occurrence of freak waves.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.4
• /
• pp.258-265
• /
• 2015

Over the last 20 years, freak waves have attracted many researchers because of their unexpected behaviors and damages on offshore structures and vessels in the ocean and coastal waters. Despite many researches on the causes, mechanisms and occurrence of freak waves, we have not reached consensus on the results of the researches. This paper presents the occurrence probability of freak waves based on the analysis of wave records measured at coastal waters of Donghae harbor in the East Sea. Three freak waves were found which satisfied conditions of m and $H_S{\geq}2.5m$ and $H_m/H_S{\geq}2$. The occurrence probabilities of freak waves were estimated from extreme distributions by Mori, Rayleigh and Ahn, and found to be on the orders of O($10^{-1}$), O($10^{-2}$), and O($10^{-3}$), respectively. The occurrence probabilities of freak waves measured from waves records were estimated between O($10^{-2}$) and O($10^{-3}$), which were located between predictions by Rayleigh and Ahn's extreme probability distributions. However, we need more analysis of wave records obtained from diverse field conditions in order to verify the accuracy of the estimation of occurrence probability of freak waves.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.241-249
• /
• 1999

To estimate the compressive strength of concrete more realistically, relative large number of data are necessary. However, it is very common in practice that only limited data are available. The purpose of the present paper is therefore to propose a realistic method to estimate the compressive strength of concrete with limited data in actual site. The Bayesian method of statistical analysis has been applied to the problem of the estimation of compressive strength of concrete. The mean compressive strength is considered as the random parameter and a prior distribution is selected to enable updating of the Bayesian distribution of compressive strength of concrete reflecting both existing data and sampling observations. The updating of the Bayesian distribution with increasing data is illustrated in numerical application. It is shown that by combining prior estimation with information from site observation, more precise estimation is possible with relatively small sampling. It is also seen that the contribution of the prior in determining the posterior distribution depends on its sharpness or flatness in relation to the sharpness or flatness of the likelihood function. The present paper allows more realistic determination of concrete strength in site with limited data.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.463-469
• /
• 2016

In this study, a virtual specimen with a linear continuous gradient of void ratio (FGM: Functional Graded Material) is constructed using low-order probability functions of two real cement paste specimens. Two real specimens with difference void ratios are taken from X-ray CT to construct the virtual specimen. A virtual specimen with a gradient void distribution, whose average void ratio is between void ratios of two homogeneous real specimens, is constructed using a stochastic optimization approach. The void ratio distribution is assumed to be linear, and continuously varies in the vertical direction. In this study, a gradient term of void ratio is incorporated into the objective function as well as low-order probability functions from the previous research. To confirm the effect of gradient void distribution on the material response, air permeability is evaluated using finite element analysis. The analysis results are compared with experimental results, and confirm the effect of gradient void distribution on permeability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.375-381
• /
• 2011

The primary aim of this study is to investigate the probabilistic characteristics of the fatigue parameters that describe the fatigue crack growth behavior in magnesium alloy. Statistical fatigue crack propagation experiments have been performed on rolled AZ31 magnesium alloy CT specimens with different specimen thickness, load ratio, and maximum load at ambient temperature in a laboratory. Using the statistical fatigue data obtained from these experiments, the goodness-of-fit of the probability distribution of the fatigue behavior parameters is evaluated in this study by performing statistical analyses. The crack growth rate coefficient is a fatigue parameter having a very large COV(Coefficient of Variation), but the variation of a crack growth rate exponent is not substantial. It is considered that a crack growth rate exponent can be a material constant. It is also found that the best fit probability distribution of the parameters such as the crack growth rate coefficient and crack growth rate exponent for a magnesium alloy is a three-parameter Weibull distribution, and two-parameter Weibull distribution is a good distribution only for the crack growth rate coefficient.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.2 s.25
• /
• pp.53-63
• /
• 2007

This study is to evaluate the probable snowfall depth by the point frequency analysis and to draw the map of probable snowfall depth in Korea. The 14 probability distributions which has been widely used in hydrologic frequency analysis are applied to the annual maximum depth of snowfall data. The parameters of each probability distribution are estimated by method of moments, maximum likelihood method and method of probability weighted moments. The estimated parameters were checked by parameter validity conditions of each assumed probability distribution. Four tests that are $X^2-test$, Kolmogorov-Smirnov test, Cramer von Mises test and probability plot correlation coefficient test are used in this study to determine the goodness of fit of the distributions. Mostly the 2-parameter gamma distribution was determined as appropriate distribution for the annual maximum new snowfall depth. The probable snowfall depth were obtained from appropriate distribution for the selected return periods and the maps of probable snowfall depth were presented. It will be useful to specify the snowfall load for the design of agricultural facilities such as vinyl house and cattle shed.