• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.173-174
• /
• 2015

컨테이너 터미널에서 이적작업은 적하작업과 반출작업을 신속하게 처리하기 위해 장치장에 흩어져 있는 컨테이너들을 재배치하는 것이다. 본 연구는 수직 배치형 장치장 블록 내에서 컨테이너 재배치 작업계획 문제를 다룬다. 재배치 작업계획은 대상 컨테이너, 옮겨질 위치 그리고 재배치 작업 순서를 정하는 것이다. 본 연구는 재배치 작업시간, 반출작업, 적하작업의 가중시간 비용을 최소화하면서 재배치 작업동안 공간 가용성이 만족되도록 장치위치와 작업순서를 함께 결정하는 혼합정수계획모형을 개발하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.123.1-123.1
• /
• 2011

본 연구에서는 THF(Tetrahydrofuran)와 산화탄소나노튜브를 혼합한 유체가 메탄 하이드레이트 생성에 어떠한 영향을 미치는지 알아보기 위해 하이드레이트 생성실험을 수행하고 비교분석하였다. 먼저 하이드레이트 생성 시 정확히 큰 동공에 하나의 THF 분자를 위치시킬 수 있는 5.56 mol%의 THF 혼합유체와 0.003 wt%의 산화 탄소나노튜브를 첨가한 산화탄소나노유체에서 하이드레이트 생성실험을 수행한 결과 같은 과냉도에서 상평형은 THF가 우수하였으며, 하이드레이트 생성에 소모되는 가스소모량은 산화탄소나노튜브가 월등히 우수한 효과를 보였다. 따라서 이 두 종류 촉진제의 단점을 보완하고, 우수한 효과를 이끌어 내기 위해 THF와 산화탄소나노튜브를 혼합하였다. 0.003 wt%의 산화탄소나노유체에 5.56 mol%의 THF를 혼합하였으며, 하이드레이트 상평형, 가스소모량, 생성시간을 측정하여 증류수와 THF, 산화탄소나노유체와 비교하였다. 그 결과, THF+산화탄소나노튜브 혼합유체의 상평형은 THF의 상평형과 비슷하였으고, 과냉도 3.4K에서의 가스소모량은 산화나노유체가 증류수의 3.6배, THF가 증류수의 1.7배, THF+산화탄소나노튜브 혼합유체가 증류수의 5.2배로 THF+산화탄소나노튜브 혼합유체에서 가스소모량이 가장 높음을 알 수 있었다. 또한 하이드레이트 생성시간은 같은 과냉도에서 THF+산화탄소나노튜브 혼합유체가 THF보다 빠르며, 산화탄소나노유체의 하이드레이트 생성시간과 비슷함을 보였다. 따라서 THF+산화탄소나노튜브 혼합유체는 THF의 우수한 상평형 효과와 탄소나노튜브의 높은 가스소모량 효과를 같이 가지고 있음을 확인하였다.

• The Korean Journal of Applied Statistics
• /
• v.24 no.3
• /
• pp.547-557
• /
• 2011

In this paper we developed a statistical model for traffic volume data which collected from a spot of specific local state road. One peculiar property of daily traffic data is that it has bimodal shape which have two peaks on times of both going to office and coming back to home. So, various mixture models of circular distribution are suggested for bimodal traffic data and EM algorithms are applied to estimate the parameters of the suggested models. To compare the accuracy of the suggested models, classical regressions with dummy variables are also considered. The suggested models for traffic volumn data can be effectively used to estimate missing values due to measuring instrument disorder.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.2
• /
• pp.273-279
• /
• 2013

The microorganisms producing high protease activity and acid producing ability were isolated from Chunggukjang and kimchi, which were identified as Bacillus subtilis and Lactobacillus planetarum by morphological, biochemical and nutrient requirement. The attempt was made to produce soybean milk yoghurt by using the isolated microorganisms. The mixed culture of Bacillus subtilis and Lactobacillus plantarum exhibited the lowest pH value of 4.23 and highest titratable acidity of 0.88% compared to those of single cultures at $37^{\circ}C$ for 32 hrs, and their total viable count was $4.09{\times}10^8$ $cfu/m{\ell}$. The ${\alpha}$-amylase activity was the highest in culture of Bacillus subtilis after incubation for 24 hrs, while protease activity was most produced in mixed culture of Bacillus subtilis and Lactobacillus plantarum. The amounts of reducing sugars were steadily decreased as soy milk fermentation progressed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.451-459
• /
• 2002

High strength flour (12.5% protein) and low strength flour (10.5% protein)were used to determine optimum formulation far steamed bread added with green tea powder (GTP). The response surface study consisted of the following independent variables : GTP (1.5∼4.5%), mixing time (8∼14 min), fermentation time (30∼50min). Bread Quality attributes measured for total bread score of each combination were loaf volume, spread ratio, surface glossiness, smoothness, grain and texture (firmness, cohesiveness, elasticity and adhesiveness). The required amount of GTP, mixing time and fermentation time for steamed bread made from two kinds of flour were different. GTP could be more added to lower strength flour than higher strength flour without losing bread quality. GTP highly affected the loaf volume, spread ratio, surface smoothness, firmness and total bread score of steamed bread (p<0.001). The results suggested that the functional steamed bread added with GTP having excellent quality can be made from low strength flour using green tea powder 3.2%, mixing time 11 min 8 sec and fermentation time 39 min 55 sec.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.1-8
• /
• 2013

The water-in-fuel droplets were applied to investigate the effect of mixing ratio between water and decane, ambient temperature, droplet size and spacing between droplets on ignition and micro-explosion in a heated chamber with high temperature. The ignition temperature of droplet was found lower as the droplet size was increased and the contents of water was decreased. The life time of droplet, however, decreases as the contents of water increases due to the micro-explosion. The occurrence of micro-explosion also increases as the size of droplets and the ambient temperature increase. The flame spread speed gets faster as the contents of water and the number of suspender decreases.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.109-116
• /
• 2012

This study investigated the effects of blast furnace slag mortars activated with sodium hydroxide(NaOH) and gypsum in relation to flow, setting time and compressive strength. The parameters in this studied was the gypsum ratio 0 to 50%, 3M and 6M of activator concentration and $20{\pm}2^{\circ}C$ and $35{\pm}2^{\circ}C$ of curing temperatures. The results of flow was increase, setting time was increase as the amount of gypsum increases. But the results of compressive strength was dependent on the gypsum ratio, indicating that the compressive strength increased with the increase of the amount of gypsum until a certain limit, beyond which the strength decreased quickly.

• Journal of Convergence for Information Technology
• /
• v.11 no.8
• /
• pp.207-211
• /
• 2021

This paper addresses a two-stage flexible flow shop scheduling problem in which there is one machine in stage 1 and two identical machines in stage 2. The objective is the minimization of the total completion time. The problem is formulated by a mixed integer quadratic programming (MIQP) and a hybrid simulated annealing (HSA) is proposed to solve the MIQP. The HSA adopts the exploration capabilities of a genetic algorithm and incorporates a simulated annealing to reduce the premature convergence. Extensive computational tests on randomly generated problems are carried out to evaluate the performance of the HSA.

• Journal of the Korean Magnetics Society
• /
• v.5 no.6
• /
• pp.928-936
• /
• 1995

In this research, the processing control of NiCuZn Ferrite has been developed. The mixing and the size reduction of raw materials have been proceeded. In order to produce NiCuZn Ferrite, highly concentrated slurry with fixed ratio and wet ball milling were used. First, the dispersion behavior of raw mixture at the region of pH4~pH11 has been studied. Using wet ball milling operation, the best conditions of mixing and size reduction have been determined. Further more, the most suitable conditions, such as, dispersant kind, dispersant amount, milling time, and slurry concentration have been studied. The poly acrylic ammonium salt (PAN) was chosen as a suitable dispersant to have effective dispersion in basic region. The slurry of raw mixture without dispersant, showed high viscosity and poor grindability. As 0.7 wt% of PAN was added, the concentrated slurry (up to 55 vol%) was possible, and showed well grindability. After 18 h ball milling of 30 vol% of mixture slurry with 0.7 wt% of PAN, the average particle size and specific surface area of raw mixture were $0.54\mu\textrm{m}$ and $12.92m^{2}/cc$, respectively. The ball milled raw mixture, calcined at $700^{\circ}C$ for 3h, was totally changed into NiCuZn Ferrite with spinel phase.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.268-277
• /
• 2017

In this study, lignocellulose nanofibrils (LCNFs) were prepared from Pussy willow wood powder by disk-milling after pretreatment using the cosolvent of 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac) and N,N-dimethylformamide (DMF) with different mixing ratios for different time. All pretreated samples showed native cellulose I polymorph and cellulose crystallinity was lowest when cosolvent of DMF with 30% [EMIM]Ac was used. Average crystallite size of raw material and the pretreated product by MDF and its cosolvent with 10% [EMIM]Ac was found to be about 3.2 nm and decreased with increasing pretreatment time at the DMF cosolvent with 30% [EMIM]Ac. Defibrillation efficiency was improved by loosening wood cell wall structure by the pretreatment using co-solvent system of [EMIM]Ac and DMF.