• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.

• The Korean Journal of Applied Statistics
• /
• v.27 no.4
• /
• pp.629-643
• /
• 2014

It is common to check the validity of an assumed model with the heavy use of diagnostics tools when conducting data analysis with regression techniques; however, outliers and influential data points often distort the regression output in undesired manner. Jang and Anderson-Cook (2013) proposed a graphical method called a firework plot for exploratory analysis that could visualize the trace of the impact of possible outlying and/or influential data points on individual regression coefficients and the overall residual sum of squares(SSE) measure. They developed 3-D plot as well as pair-wise plot for the appropriate measures of interest. In this paper, the approach was extended further to tell the strength of their approach; in addition, a more meaningful interpretation was possible by adding a measure not mentioned in their paper. This approach was applied to the mixture experiment because we felt that a detailed analysis of statistical measure sensitivity is required in a small experiment.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.53-58
• /
• 1998

Wheel tracking and ravelling tests were conducted on the hot mix crumb rubber modified asphalt concrete usmg waste tire t to evaluate the mechanical prope$\pi$ies in comparison with conventional asphalt concrete. According to the test results, the m modified product, lias superior to the conventional one by 50% in the resistance of permanent deformation and by 15% in the m resistance of dmability. The experimental results should recommend thut the waste tir$\xi$ is positively recycled for asphak concrete.

• Fire Science and Engineering
• /
• v.17 no.2
• /
• pp.43-49
• /
• 2003

For the inert gases of Ar, $N_2$and $CO_2$, the empirical equations of the gas mixture were correlated in terms of saturated pressure, density and viscosity. They were obtained by regression analysis based on the mixing rule. The empirical equation of saturated pressure was assumed as the first order function of temperature. The empirical form of density was expressed as compressibility factor and saturated pressure while the empirical equation of viscosity was formulated as a power function of temperature. This empirical equations of the physical properties were obtained in the composition of Ar, $N_2$and $CO_2$, 40/50/10(mol. %).

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.602-610
• /
• 2020

Purpose: This paper aims to develop an asphalt pavement system with reduced cracks, structural stability and waterproofing at sub-zero temperature conditions. Method: Under various temperature conditions, SIS polymer asphalt, normal asphalt, and guss asphalt were tested for adhesion strength of the binder and deformation strength of the mixture. Result: The adhesion strength of asphalt binder was higher in SIS polymer asphalt than that of normal asphalt and guss asphalt. The deformation strength of the asphalt mixture was almost the same as that of SIS polymer asphalt and normal asphalt. The energy absorption of the SIS polymer asphalt mixture was relatively higher than that of the normal asphalt mixture and the guss asphalt mixture. Conclusion: The maximum load of the SIS polymer asphalt mixture was lower than that of the guss asphalt mixture. However, in sub-zero temperature conditions, sufficient energy absorption was secured by stable load reduction. Therefore, it is expected to improve the durability of asphalt pavement by reducing the occurrence of microcracks with stable fracture behavior.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.4
• /
• pp.263-268
• /
• 1999

It was found that the level of alcohol concentration in both mouse and human sera can be significantly decreased up to 42% by oral administration of the mixtures of the extracts of Hovenia dulcis THUNB and Alnus japonica Steud. A single treatment of extract from Hovenia dulcis reduced the serum alcohol concentration to 32%, compared to 13% in treating the extract of Alnus japonica. Similar patterns were observed in enhancing alcohol dehydrogenase (ADH) and glutathion-S-transferase (GST) activity in the liver. The inhibition of cathepsin activity was also greatly reduced by administrating the mixture of both extracts : however, the extract of Alnus japonica did not affect the acitivity of cathepsin. It was concluded that the mixture of both extracts had synergic effect on reducing serum alcohol concentration and improving the detoxification process due to alcohol administration in the liver.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.345-348
• /
• 2012

본 연구는 Zn-Al혼합물 분진의 화재폭발사고예방을 위한 안전자료 확보를 목적으로 최소발화온도를 실험적으로 조사하였다. Zn-Al혼합물의 최소발화온도 측정은 퇴적두께 10 mm, 직경 100 mm의 원형 형태로 퇴적된 시료를 대상으로 가열판의 승온속도 $20^{\circ}C/min$의 조건에서 실시하였다. 그 결과, $280^{\circ}C$에서 Zn-Al혼합물 분체는 가열 후 1000 s부터 발열을 통하여 급격히 온도가 상승하여 발화 여부 판단기준이 되는 $450^{\circ}C$를 넘어 $600^{\circ}C$에 다다르며 시간과 함께 감소하였으며 임계 최소발화온도는 $280^{\circ}C$로 나타났다. 퇴적Zn-Al혼합물 분체의 최소발화온도는 문헌에 제시된 Al에 비하여는 낮은 것으로 나타났다.

• Journal of Life Science
• /
• v.28 no.6
• /
• pp.663-670
• /
• 2018

This study was performed to confirm the antioxidative and hair-growth-promotion effects of a fermented compound composed of five materials, namely Allium cepa, Cucurbita spp., Glycine max Merr., Pinus sylvestris leaf, and Sesamum indicum. An additional compound composed of two materials was composed of Allium cepa and Cucurbita spp. Antioxidative effects were measured based on DPPH radical-scavenging activity and total flavonoid content. Fermented 5-type natural compounds (5NC) showed higher DPPH radical-scavenging activity and flavonoid content than those of fermented 2-type natural compounds (2NC). Hair-growth promotion was demonstrated in vivo. Alkaline phosphatase (ALP), oid contentontenteptidase phospactivity, and macroscopic observation were measured. Experimental animals were divided into four groups based on the samples they were administered: water, pansildil (P-CON), 5NC, and 2NC. Samples were administered orally once a day at a fixed time for four weeks. Both ALP and ${\gamma}eeksactivity$ increased in the 5NC group compared with the 2NC group. In macroscopic observation, the P-CON group grew the most and were most similar to the state before shaving. The 5NC group grew hair similar to the P-CON group. In all the results, the 5NC group showed greater antioxidative and hair-growth-promotion effects than the 2NC group. Consequently, 5NC could be used as an ingredient for hair-growth promotion.

• Journal of the Korean Chemical Society
• /
• v.45 no.5
• /
• pp.481-490
• /
• 2001

The purpose of this study was to find out the problems on the fractional distillation experiments in the middle school science textbooks based on the 6th curriculum and to suggest an efficient experiment method for the middle school students. The first step was the classification of the experiments in 8 science textbooks according to heating apparatus and liquid mixtures. The second step was doing each experiment 3 times followed by the experimental process in the textbooks. The third step was developing the alternative experiments for solving the problems found in the second step. The heating method used in the alternative experiments were direct heating, oil bath, and heating mantle. The results of the second step showed that the direct heating experiment of branched round flask was more close to the theoretical prediction than the experiment of water bath heating of branched test tube. Also the direct heating experiment of thermally insulated branched round flask was better than the result of the experiment which was not insulated. The results of the third step showed that the experiment using heating mantle regulated heating power by observing the temperature of distillate gave the closest result to the theoretical prediction. From the above results, it is concluded that the experiment using branched test-tube with water bath heating is not adequate for the fractional distillation and an alternative experiment using insulated branched round flask with heating mantle regulated heating power during experiment is recommended.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.227-233
• /
• 2020

The demand for porous asphalt mixtures is increasing because it has a range of functions, such as reducing traffic accidents and traffic noise. On the other hand, its application is delayed due to concerns about durability. This study examined the effects of the maximum aggregate size, temperature, and porosity of an asphalt mixture on the durability. To this end, the durability measure was set to the Cantabro loss rate. Mixtures having the same porosity of 20% and the maximum aggregate diameters of 13 mm, 10 mm, and 8 mm were tested at 20℃ and -20℃. Mixtures containing 20% and 22% voids with the same material having the same diameter were tested. With 20% porosity, there was no significant difference in durability when there was a change in the maximum aggregate size. There was a significant difference between 20℃ and -20℃, but no significant difference in durability when there was a 2% difference between 20% and 22%. The significance of this study is that the durability was presented quantitatively by tests and statistical analysis. This research will help improve the durability of porous asphalt mixtures by evaluating the factors affecting the durability quantitatively.