• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1387-1392
• /
• 2006

본 논문에서는 SVM (Support Vector Machine)을 기반으로 하여 인체의 뇌 하부구조인 해마에 대한 지능적 형상분석 방법을 제공한다. 일반적으로 의료 영상으로부터 해마의 형상 분석을 하기 위해서는 충분한 임상 데이터를 필요로 한다. 하지만 현실적으로 많은 양의 표본들을 얻는 것이 쉽지 않기 때문에 전문가의 지식을 기반으로 한 작업이 수반되어야 한다. 결국 이러한 요소들이 분석 작업을 어렵게 한다. 의학 기술이 복잡해 지면서 최근의 형상 분석 연구는 점차 통계적 모델을 기반으로 진행되고 있다. 본 연구에서는 해마로부터 고해상도의 매개변수형 모델을 만들어 형상 표현으로 이용하고, 집단간 분류 작업에 SVM 알고리즘을 적용하는 지능적 분석 방법을 구현한다. 우선 메쉬 데이터로부터 물리변형모델 기반의 매개변수 모델을 구축하고, PDM (point distribution model) 방법을 적용하여 두 집단을 대표하는 평균 모델을 생성한다. 마지막으로 SVM 기반의 이진 분류기를 구축하여 집단간 분류 작업을 수행한다. 구현한 모델링 방법과 분류기의 성능을 평가하기 위하여 본 연구에서는 네 가지 커널 함수 (linear, radial basis function, polynomial, sigmoid)들을 적용한다. 본 논문에서 제시한 매개변수형 모델은 다양한 형태의 의료 데이터로부터 보편적인 3차원 모델을 생성하고, 또한 모델의 전역적, 국부적인 특징들을 복합적으로 표현할 수 있기 때문에 통계적 형상분석에 적합하다. 그리고 SVM 기반의 분류기는 적은 수의 학습 데이터로부터 정상인 해마 집단과 간질 환자 집단간의 정확한 분류를 가능하게 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.689-701
• /
• 2011

The relations between ambient conditions and ice accretion shapes are quantitatively analyzed by employing self-organization maps and analysis of variance. Liquid water contents(LWC), mean volumetric droplet diameter(MVD), ambient temperature and free-stream velocity are chosen as ambient conditions which change ice accretion shapes. The parameters of ice accretion shape are selected as maximum thickness, icing limits, ice heading, and ice accretion area. Qualitative analysis was conducted by employing self-organization maps which show the qualitative relations between ice shapes and ambient conditions. The quantitative results of analysis of variance yield intensity of ambient conditions to the parameters of ice accretion shapes.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.8-17
• /
• 1992

There has been considerable reseach on the representation of a hull form which is a 3-dimensional free surface. A form parameter method to describe the hull form by means of form parameters which represent the characteristics of the given hull form geometry has been recently paid special attention with the advent of powerful computer. However, there have been reported many problems to the conventional form parameter for the practical hull form generation. In the present paper, an attempt has been made to creak hull form by combining the form parameter method with the B-spline curve which can be best fitted to free surfaces. In an application, the present method is used to generates a Bulk carrier hull form and compared with the existing hull form to prove its applicability for the hull form generation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.11
• /
• pp.755-762
• /
• 2022

The wind tunnel test data for the missile configuration were compared with analysis results using various semi-empirical code and CFD analysis code. The three types of configurations were used for comparison including 2 types of main wing, inline and interdigitate configuration that the main wing and tail intersect. Additionally, it was confirmed that the vortex flow was accurately predicted by comparing the CFD analysis result with the flow visualization test result.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2844-2851
• /
• 2015

How to recover from the multiple 2D images into 3D object has been widely studied in the field of computer vision. In order to improve the accuracy of the recovered 3D shape, it is more important that noise must be minimized and the number of image frames must be guaranteed. However, potential noise is implied when tracking feature points. And the number of image frames which is consisted of an observation matrix usually decrease because of tracking failure, occlusions, or low image resolution, and so on. Therefore, it is obviously essential that the number of image frames must be secured by recovering the missing feature points under noise. Thus, we propose the analytic approach which can control directly the error distance and orientation of missing feature point by the geometrical properties under noise distribution. The superiority of proposed method is demonstrated through experimental results for synthetic and real object.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.1
• /
• pp.46-53
• /
• 2001

The purpose of this paper is to develop a new feature selection method for AE signal classification. The neural network of back propagation algorithm is used. The proposed feature selection method uses the difference between feature coordinates in feature space. This method is compared with the existing methods such as Fisher's criterion, class mean scatter criterion and eigenvector analysis in terms of the recognition rate and the convergence speed, using the signals from the defects in welding zone of austenitic stainless steel and in the metal contact of the rotary compressor. The proposed feature selection methods such as 2-D and 3-D criteria showed better results in the recognition rate than the existing ones.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.1
• /
• pp.51-58
• /
• 2005

we can set laser patterns with 3D information from vision camera after projected to object with laser stripes. They are very useful for 3-Dimensional informations. We researched the laser patterns of human body projected by stripes and found out three featuring patterns and made database of patterns using Fourier descriptors to recognize the patterns of bodies. The HMM method and Fourier descriptors to recognize human body were experimented. We found out HMM method can recognize human body in more efficient rate than the other.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.207-212
• /
• 2008

최근 공장 자동화가 보편화됨에 따라 무인 운반설비의 자동화 시스템 개발의 한 부분으로써 Stereo Vision 장치를 이용하여 입력된 영상의 에지(Edge)를 추출하고, 추출된 에지를 이용하여 물체의 위치적 특징을 찾고 무인크레인이 이동해야할 위치좌표를 전달한다. 본 연구에서는 실제 산업현장에 가장 보편적인 형상인 판재와 원통을 기준으로 CCD 카메라 2대를 이용하여 물체의 형상을 인식하고, 그 물체의 중심점을 찾는 알고리즘을 제안하였다. 우선 에지를 추출하고 사용자의 선택에 따라 추출된 에지의 특징을 판별하여 판재와 원통을 구분하여 원하는 물체의 위치정보를 찾아낸다. 본 연구는 무인 운반설비의 자동화 시스템 개발에 도움이 될 것으로 기대된다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.297-298
• /
• 2013

본 논문에서는 IR 영상추적을 위하여 가린 표적의 실제 중심을 예측하는 추적창 조절(target window adjustment) 기법을 제시한다. 대표적 분할 추적(patch tracking) 방식인 특징점 추적(feature point tracking)은 표적의 중심과 특징점을 coupling하여 가린 표적의 실제 중심을 예측할 수 있으나, 형상 정보가 적은 영상에서 표적의 ROI(Region of Interest)는 특징점의 분포만으로는 구할 수 없다. 본 논문에서는 상관추적의 추적창 조절 기법과 특징점 추적의 coupling 기법을 결합하여 표적이 장애물에 가리는 경우에도 안정적인 추적창을 유지한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.540-545
• /
• 2002

The tight integration of the part design and process planning is very effective to high quality product development and cost effective manufacturing. Moreover, the integration in the early design stage, that is, the integration of the conceptual design and the conceptual process planning may take a big impact with the forecasting the alternative of the design and manufacturing. In this paper, the real field parts are studied about the relations among the Feature, Function, and Manufacturing Process taking the style of reverse engineering method, to found the base of the systematic computer system for the integrated product design and manufacturing process planning.