• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.4
• /
• pp.25-31
• /
• 2013

A blisk with rotor shroud is usually adopted in LRE turbine to maximize its performance. However it experiences the severe thermal load and resulting damage during engine stating and stop. Shroud splitting is devised to relieve the thermal stress on the turbine rotor. Structural analysis confirmed the reduction of plastic strain at the blade hub and tip. However, split gap at the rotor shroud entails additional tip leakage and results performance degradation. In order to assess the effect of shroud split on the turbine performance, tests have been performed for various settings of shroud split. For the maximum number of shroud splitting, measured efficiency reduction ratio was 2.65% to the value of original shape rotor.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.451-456
• /
• 2018

UAVs (Unmanned Aerial Vehicles) are widely used for maintenance and monitoring of facilities. It is necessary to acquire a high-resolution image for evaluating the appearance state of the facility in safety inspection. In addition, it is essential to acquire the video data in order to acquire data over a wide area rapidly. In general, since video data does not include position information, it is difficult to analyze the actual size of the inspection object quantitatively. In this study, we evaluated the utilization of 3D point cloud data of bridges using a matching between video frames and reference photos. The drones were used to acquire video and photographs. And exterior orientations of the video frames were generated through feature point matching with reference photos. Experimental results showed that the accuracy of the video frame data is similar to that of the reference photos. Furthermore, the point cloud data generated by using video frames represented the shape and size of bridges with usable accuracy. If the stability of the product is verified through the matching test of various conditions in the future, it is expected that the video-based facility modeling and inspection will be effectively conducted.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.389-394
• /
• 2019

In case of damaged timber sleepers, maintenance is carried out according to the track inspection standard. However, it is difficult to detect the extent of damage on the bridge, and maintenance is depended on inspector's judgment. In this study, we propose to improve the evaluation criterion of timber sleepers for the ballast-less tracks on serviced urban railway bridge. The timber sleepers on railway bridge was classified according to degree of damage, and damage scores were calculated for each damage grade. Also we have improved the maintenance system of the timber sleepers through the history management system of the individual timber sleepers on railway bridge. As a results, it was judged that systematic management of timber sleepers could be possible during maintenance.

• Journal of Industrial Convergence
• /
• v.20 no.6
• /
• pp.117-123
• /
• 2022

Appearance, which is directly related to competitiveness, has become one of the essential self-care for modern people living in the era of the 4th industrial revolution. For the purpose of producing more practical and convenient wigs for suffering customers, data of research subjects were collected through an information search portal site. The trend of new material development of leading wig companies was analyzed. As a result of the study, it was found that many applications for wig attachment and binding technology were applied before 2005, artificial hair-related manufacturing technology for wigs from 2006 to 2013, and functional-related wig technology after 2014. In addition, both H and M companies showed the development trend of new materials for shape memory materials and nanoskins with their own characteristics. We believe that this study will be provided as basic data for the development of functional wigs that can lead to customer satisfaction while providing customers with a comfortable and convenient fit in the wig industry market.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.524-524
• /
• 2023

하천 내 식생의 분포는 흐름저항의 증가와 수위상승에 큰 영향을 미치는 요소 중 하나이다. 동일한 단면정보를 가졌더라도 식생이 분포하는 하도는 식생이 없는 하도에 비해 흐름저항으로 인해 유속이 현저히 느려져 홍수위 상승을 유발하기 때문이다. 따라서 식생의 종류, 크기, 분포 형태, 잎의 밀도 등에 따라 흐름저항계수를 정량화하며 흐름을 정확히 예측하는 것이 필요하다. 본 연구에서는 2019년 한국건설기술연구원 하천실험센터에서 진행된 식생하도에 대한 실규모 실험의 조건과 지형정보를 HEC-RAS(Hydrologic Engineering Center's River Analysis System) 1차원 수치모형에 입력하고, 식생 패치의 분포를 고려한 Manning's n의 공간적 분포 및 적용방식에 따른 수면 경사 재현 정확도에 대한 민감도 분석을 수행하였다. 실험은 상단 폭 11 m, 경사 1:2(V:H)의 사다리꼴 단면을 가진 실규모 수로에서 70 m 길이의 구간을 대상으로 진행되었다. 실험 구간 내 6개의 압력식 수위계를 설치해 수위 측정 및 수면 경사 산정을 실행하였다. 실험 조건으로 적용된 인공 식생패치의 분포 및 밀도 조건은 3가지로 큰 패치와 작은 패치로 구성된 조밀한 조건, 단일 패치로 구성된 조밀한 조건, 단일 패치로 구성된 성긴 조건이었으며, 모두 정수(emergent)상태로 진행되었다. 적용된 패치의 형상은 내성천에서 조사된 자연 형태의 식생패치 형태를 참고하였으며, 버드나무 종을 모사하였다. 실험 조건에 따라 유량은 각각 평균 1.5 cms와 2.7 cms로 공급하였으며, 평균 수심은 약 1 m로 측정되었다. 위 실험 내용을 바탕으로 수치모의를 위한 경계조건과 지형정보를 수립하였으며 모의 케이스는 크게 두 가지로, 수로 내 식생의 분포를 종방향으로 고려한 케이스와 횡방향으로 고려하여 조도계수를 적용한 케이스로 분류하였다. 모의에 적용된 조도계수는 실험에서 획득한 데이터와 베르누이 방정식을 활용하여 산정되었으며, 두 케이스에 대한 모의 결과는 실험에서 관측된 수위와 비교하였다. 본 연구에 따르면 여러 개의 식생패치가 정수상태로 존재하는 하천에 대한 1차원 수치모의 시 식생의 분포를 종방향으로 고려하여 하나의 구간조도계수를 적용하는 방식이 종횡단면의 식생패치 위치를 고려한 조도계수를 세분화하여 적용하는 방식에 비해 수위 계산 정확도가 상대적으로 높은 것으로 나타났다.

• Clean Technology
• /
• v.15 no.4
• /
• pp.233-238
• /
• 2009

Supercritical fluid processes have gained great attention as a new and environmentally-benign method of preparing the microparticles of energetic materials like explosives and propellants. In this work, RDX (cyclotrimethylenetrinitramine) was selected as a target explosive. The microparticle formation of RDX using supercritical anti-solvent (SAS) recrystallization process was performed and the effect of operating variables on the size and morphology of prepared particles was observed. N,N-Dimethylformamide was used as organic solvent for dissolving the RDX. The size of the RDX particles decreased remarkably up to less than $10\;{\mu}m$ by SAS recrystallization. In the range of operating conditions of the SAS process studied in this work, the finest RDX particles were obtained at 313.15K, 150 bar, and 15wt% RDX concentration in feed solution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.409-409
• /
• 2021

하천 내의 식생은 발달시기에 따라 휴지기, 성장기, 소멸기로 구분되며 각 시기에 따라 수위-유량관계곡선에 많은 전이가 발생한다. 이러한 식생의 성장과 소멸 뿐만 아니라 하도와 하안영역의 식생 군락의 밀도 증감에 따라서도 다양한 형태의 수위-유량관계곡선식의 전이가 발생한다. 식생의 성장기에는 식생의 밀도가 서서히 증가하여 수위-유량관계곡선식의 (-)전이가 발생하며, 식생의 소멸기에는 식생의 밀도가 서서히 감소하여 수위-유량관계곡선식의 (+)전이가 발생한다. 식생에 의한 수위-유량관계곡선식의 변동성은 식생의 성장과 소멸뿐만 아니라 하도와 하안영역의 식생 군락의 식생 밀도 역시 많은 영향을 끼치고 있다. 우리나라의 강우는 특정기간(6월~10월)에 집중되는 경향으로 인하여 식생의 성장과 소멸에 따른 수위-유량관계곡선식의 변동성 확인이 용이하였다. 그러나 최근 과거와 다른 형태의 강우패턴으로 인한 하천의 단면형상 변화로 인하여 하도와 하안영역의 식생영향이 감소하는 경향이 발생하고 있다. 이러한 단면변화로 인하여 하천 내의 하안영역과 식생 밀도 감소에 따른 수위-유량관계곡선식의 변동성이 발생하였다. 본 연구에서는 만경강 유역에 위치한 완주군(소양용연교)관측소를 대상으로 2018년과 2020년의 식생밀도와 식생 및 하도 모니터링을 통한 수위-유량관계 변화를 분석하였다. 2018년에는 식생의 활착, 성장, 소멸에 따라 다양한 기간분리가 발생하였으며, 2020년에는 식생의 활착, 성장, 소멸 뿐만 아니라 홍수 전후 식생 밀도 감소에 따른 기간분리가 추가로 발생하였다. 2020년은 과거와 달리 집중호우가 장기간(약34일)발생하였으며 그에 따라 홍수 전후 단면변화가 과거에 비해 매우 큰 것으로 확인되었다. 이로 인해 2018년과 2020년 측정성과 검토 결과 유사한 수위에서 약 3배의 유량차가 발생하였다. 결과적으로 본 연구에서는 하천 내의 식생밀도 변화로 흐름 특성이 변화하는 기간의 유량측정성과 확보를 통한 신뢰도 높은 수위-유량관계곡선식을 개발하였고 이를 통해 생산된 유량자료는 정확도가 매우 높은 것으로 분석되었다.

• Journal of the Korea Computer Graphics Society
• /
• v.28 no.4
• /
• pp.1-11
• /
• 2022

The Skinned Multi-Person Linear Model (SMPL) is the most widely used parametric 3D Human Model optimized and learned from CAESAR, a 3D human scanned database created with measurements from 3,800 people living in United States in the 1990s. We point out the lack of racial diversity of body types in SMPL and propose K-SMPL that better represents Korean 3D body shapes. To this end, we develop a fitting algorithm to estimate 2,773 Korean 3D body shapes from Korean body measurement data. By conducting principle component analysis to the estimated Korean body shapes, we construct K-SMPL model that can generate various Korean body shape in 3D. K-SMPL model allows to improve the fitting accuracy over SMPL with respect to the Korean body measurement data. K-SMPL model can be widely used for avatar generation and human shape fitting for Korean.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.150-153
• /
• 2022

This paper reports a technique that automatically extracts object shapes through Dense-Net, and subsequently, detects the objects using Mask R-CNN in a manufacturing site, in which workers and objects are mixed. It is based on the customized factory dataset by targeting workers, machines, tools, control boxes, and products as the objects. Mask R-CNN supports multi-object recognition as a well-known object recognition method, while Dense-Net effectively extracts a feature from multiple and overlapping objects. After immediate implementation using the two technologies, the object is naturally extracted from a still image of the manufacturing site to describe image. Afterwards, the result is planned to be used to detect workers' abnormal behavior by adding a label on the objects.

• Convergence Security Journal
• /
• v.23 no.3
• /
• pp.57-64
• /
• 2023

Due to the COVID-19 pandemic, the broadcasting industry has been greatly affected, to the extent that the footprint of travel programs has disappeared. Although travel programs have been back on the air since 2022, there remains a task of recovering the stagnant desire for travel. Based on a study that travel programs have a positive impact on viewers' travel intentions, this study examined a data service that provides preferred additional information on travel programs, considering the broadcasting environment of satellite broadcasters that transmit multiple travel programs through various channels. Specifically, preferred additional information was investigated for travel programs of various genres and formats, and a feature model based on FODA was designed to be used when the satellite broadcaster decides the data service configuration. In addition, the necessary information for operating the data service was defined based on the feature model, and a method of transmitting it using the DVB-S SI, a domestic satellite broadcasting standard, was devised. The feasibility of this study was also confirmed using a DVB-MHP based data service prototype.