• Journal of the Korean earth science society
• /
• v.27 no.4
• /
• pp.390-400
• /
• 2006

The purpose of this study is to propose an improvement plan based on an analysis of the current earth science teacher education curriculum in the department of education in the four fields of teaching profession theory: student-teacher practice, subject lesson education, and subject content education. The following are the conclusions and suggestions of this study. In case of teaching profession theory, too much emphasis is put on pedagogical theory over practical issues, and a problem arises upon completion. Therefore, it is sugguest that teaching profession theory might be completed before subject lesson education to ensure more authentic subjects performing teaching profession. The current term for student-teacher training is too short to understand the whole school system. Current school system does not have any off-job training course or internship system. Therefore, student-teacher training term should be increased by at least $3{\sim}6$ months to play a vital role in the current system. The credit number of subject lesson education is too small compared with subject content education. Consequently, the credit number of subject lesson education should be increased, and more professor majored in subject lesson education should be recruited. Significant deviation between the content of subject content education and that of middle school grade exists, and there is also much difference in the ratio of subject according to university. To get rid of these problems, subject content education should be connected with subject lesson education and appropriate number of credit needs to be assigned to each subject domain.

• Journal of Korean Society of Forest Science
• /
• v.13 no.1
• /
• pp.79-84
• /
• 1971

This study is, by correlation and regression analysis, on the correlation between culm height and other growth factors which are circle at eye height and length of internode. The samples were come by in Tamyang district, To sum up, the results are as follows; 1. Two growth factors are much more correlative to culm height; both simple correlation and multiple correlation between the former and the latter are significant. ($r_{yx}=0.91$, $r_{yz}=0.78$, $r_{yx{\cdot}z}=0.84$, $r_{yz{\cdot}x}=0.55$, $R_{y{\cdot}xz}=0.94$) Seeing above significance, circle at eye height is more highly correlative than length of internode. 2. The following regression equation was derived from regression analysis. y= -0.687+0.335x+0.206z. y ; culm height. x ; circle at eye height. z ; length of internode. 3. By testing of the equation, regression coefficients are as follows; ${\beta}{\neq}O$, ${\gamma}{\neq}O$, ${\beta}{\neq}O{\neq}{\gamma}$ 4. The results tested the precision of the empirical formula, standard error of standard error by percentage are as follows. $Sy{\cdot}xz=0.89$, $Sy{\cdot}xz(%)=8.14$.

• Journal of Korean Society of Forest Science
• /
• v.106 no.3
• /
• pp.320-329
• /
• 2017

This study aims to evaluate whether the accuracy of LiDAR DEM is affected by the changes of the five input levels ('1','3','5','7' and '9') of median parameter ($F_{md}$), mean parameter ($F_{mn}$) of the Filtering Algorithm (FA) in the GroundFilter module and median parameter ($I_{md}$), mean parameter ($I_{mn}$) of the Interpolation Algorithm (IA) in the GridSurfaceCreate module of the FUSION in order to present the combination of parameter levels producing the most accurate LiDAR DEM. The accuracy is measured by the residuals calculated by difference between the field elevation values and their corresponding DEM elevation values. A multi-way ANOVA is used to statistically examine whether there are effects of parameter level changes on the means of the residuals. The Tukey HSD is conducted as a post-hoc test. The results of the multi- way ANOVA test show that the changes in the levels of $F_{md}$, $F_{mn}$, $I_{mn}$ have significant effects on the DEM accuracy with the significant interaction effect between $F_{md}$ and $F_{mn}$. Therefore, the level of $F_{md}$, $F_{mn}$, and the interaction between two variables are considered to be factors affecting the accuracy of LiDAR DEM as well as the level of $I_{mn}$. As the results of the Tukey HSD test on the combination levels of $F_{md}{\ast}F_{mn}$, the mean of residuals of the '$9{\ast}3$' combination provides the highest accuracy while the '$1{\ast}1$' combination provides the lowest one. Regarding $I_{mn}$ levels, the mean of residuals of the both '3' and '1' provides the highest accuracy. This study can contribute to improve the accuracy of the forest attributes as well as the topographic information extracted from the LiDAR data.

• Korean Journal of Environmental Biology
• /
• v.27 no.4
• /
• pp.341-352
• /
• 2009

This study was carried out to investigated community structure of macrobenthic assemblages around the Wolseong Nuclear Power Plant, East Sea of Korea and seasonal sampling was performed from October 2007 to July 2008. A total of 163 macrobenthic fauna were collected. The overall average macrobenthos density and biomass were 1,005 individuals $m^{-2}$ and $21.81\;gWWt\;m^{-2}$, respectively. Based on the LeBris (1988) index, there were 10 dominant species accounting for approximately 69.00% of total individuals. The major dominant species were the polychaetes Spiophanes bombyx (349 inds. $m^{-2}$), Mediomastus californiensis (82 inds. $m^{-2}$), Sigambra tentaculata (55 inds. $m^{-2}$), Magelona japonica (50 inds. $m^{-2}$), Scoletoma longifolia (33 inds. $m^{-2}$) and the Unidentified amphipod (Amphipoda spp., 72 inds. $m^{-2}$). The conventional multi-variate statistics (cluster analysis and non-metric multi-dimensional scaling) applied to assess spatial variation in macrobenthic assemblages. Cluster analysis and nMDS ordination analysis based on the Bray-Curtis similarity identified 2 major station groups. The major group 1 was associated with sand dominated stations and was characterized by high abundance of the bivalves Mactra chinensis, Siliqua pulchella and the polychaete Protodorvillea egena. On the other hand, major group 2 was connected with mud dominated stations and was numerically dominated by the polychaetes M. californiensis, M. japonica, Sternaspis scutata, S. longifolia and the bivalves Thyasira tokunagai and Theora fragilis. However, macrobenthic community structure were no significant differences between the environmental variables (sediment type and depth) and heated discharge.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.2
• /
• pp.78-91
• /
• 2015

Macrobenthic community was studied at 87 stations including intertidal and subtidal area in Yoja Bay, south coast of Korea in summer season of July 2001. Duplicate sediment samples were taken using a van Veen grab ($0.1m^2$) in each station. Mud facies of the sediments were widly distributed in the bay. And relatively high content of sand was shown in the Bulgyo-cheon stream estuary. A total of 274 species was occurred with a mean density of $2,346ind./m^2$ and a mean biomass of $78.2g/m^2$. The polychaetes were species- and density-dominant faunal group with a total of 122 species (44.5% of the total number of species), and mean density of $1,543ind./m^2$ (65.8% of the mean density). Meanwhile, molluscs were biomass-dominant faunal group with $44.4g/m^2$. Bio-Env. analysis showed that the combination of bottom salinity and sand content of the surface sediments was highly correlated to the major macrobenthic communities. The macrobenthic species number, decreasing toward inner bay from mouth of the bay, was significantly correlated to the sediment environmental variables and bottom water salinity. The spatial distribution of abundance showed significant correlation to the sand and mud contents and mean grain size of the surface sediments. Major dominant species were Minuspio japonica (polychaete) with a mean density of $1,167ind./m^2$ at upper part of the bay where salinity was low and Eriopisella sechellensis (amphipod) with $152ind./m^2$ in central part of the bay. Species diversity (H') was $3.0{\leq}$ in the mouth part of the bay and ranged 2.0-3.0 in the inner part of the bay, which showed a significant positive correlation to bottom salinity. Total number of species also showed significant correlations to the sediment composition and bottom salinity. Based on the cluster analysis the macrobenthic community of the bay was classified into five station groups from the bay mouth toward the inner part of the bay depending on the species composition. From the SIMPER analysis Minuspio japonica, Eriopisella sechellensis and Sternaspis scutata mainly contributed to the classification of station group. These results suggested that the macrobenthic communities of the bay were mainly influenced by bottom salinity together with sediment composition, and that the studies of spatial distributions of major dominant species and benthic communities should be conducted continuously to monitor the Yeoja Bay benthic environment.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.4
• /
• pp.328-341
• /
• 2004

Presowing seed treatments used to enhance the rates of germination and afterward seedling emergence have not occasionally shown the same rate in indoor and field. The treatments considering germination mechanism and factors affecting germination must be totally included in indoor experiments so that the results drawn can be reproduced in the field. Seed germination is controlled by Phytochrome-mediated action changed with composition rates of red and far-red lights. Sunlight can penetrate soil into $6{\sim}9\;mm$ depth, which in turn means that seeds having $2{\sim}3\;mm$ in their width may receive the light if soil was covered 3 times over them. The penetrating light, moreover, turns to more far-red light than red light reverse to the sunlight. For germination tests after the artificial presowing seed treatments, therefore, seeds of smaller than 2 mm (< 2 mm), $2{\sim}3\;mm$, and larger than 3 mm (> 3 mm) must be done with incandescent lamp (IL) having more far-red light, with IL or in darkness, and in darkness, respectively. The 96 papers published in 13 Korean scientific journals up to the end of 2003 were analysed on the basis of the above explanation. 91 species were used 147 times as experimental materials; 101 times for < 2 mm seeds, 24 times for $2{\sim}3\;mm$ seeds and 22 times for > 3 mm seeds. If they were analysed as the light sources used for germination tests, correct applications reached more and less than 60% in both $2{\sim}3\;mm$ and > 3 mm seeds but 23% in < 2 mm seeds, conclusionally meaning that when the experimental results in the scientific papers were applied into farming practices, care was taken of their application because most of medicinal plant seeds were very small.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.81-85
• /
• 2009

Purpose: The examination of nuclear medicine observes the change in accordance with the time elapsed in the same region purposed and there are many examinations to acquire the image during the same term. At this time, the same parameter should be applied. The hepatobiliary scan, lung scan etc, are the acquired examination in the divided time with a regular term. Pre-set time that is applied in continued next image is set in order to acquire the fixed counts. The same scan time should be applied for each image. This study will look for the rational plan and analyze the change of scan time in accordance with the time of the decision of scan time at examination that pre-set time is applied. Methods: The hapatobiliary scan that use the radio pharmaceutical $^{99m}Tc$-mebrofenin is choosed as compensation from Jan. 2009 to Mar. 2009 in the department of nuclear medicine in ASAN MEDICAL CENTER. Scan is started after 5 minutes from when 222 MBq (6 mCi) is injected to patient. We let patient stand up between both detectors, and possibly close to the front of detector. When scan time reach 10%, 25%, 50%, 75% of total scan time, we measured the expected total scan time. After finishing all of scan, we compared the total scan time and the expected total scan time, while image is acquiring. and we observed the change of scan time in accordance with radio activity by using phantom. Results: After starting scan, a difference of when scan time reach 10%, 25%, 50%, 75% of total scan time is that the biggest difference is 5 seconds on 10%. There statistically is difference between 25% (t:2.88, p<0.01) and 50% (t:2.05, p<0.01). Conclusions: When the same the scan time is applied in the examination that acquire the many frame, concluding the same scan time has a important effect on a quantitative analysis. Although method that decide the scan time after finish all of the examinations, there is a few problem to apply practical affairs. This may cause an inaccurate result on the examination that need a quantitative analysis. We think that operator should try to improve it. At least, after reach 50% of total scan time, deciding the total scan time mean that you can minimize error of a quantitative analysis caused by unmatched scan time from a gap of image.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.125-153
• /
• 2005

It has been widely known that the seismic piezo-cone penetration test (SCPTU) is one of the most useful techniques for investigating the geotechnical characteristics including dynamic soil properties. As the practical applications in Korea, SCPTU was carried out at two sites in Busan and four sites in Incheon, which are mainly composed of alluvial or marine soil deposits. From the SCPTU waveform data obtained from the testing sites, the first arrival times of shear waves were and the corresponding time differences with depth were determined using the cross-over method, and the shear wave velocity profiles (VS) were derived based on the refracted ray path method based on Snell's law and similar to the trend of cone tip resistance (qt) profiles. In Incheon area, the testing depths of SCPTU were deeper than those of conventional down-hole seismic tests. Moreover, for the application of the conventional CPTU to earthquake engineering practices, the correlations between VS and CPTU data were deduced based on the SCPTU results. For the empirical evaluation of VS for all soils together with clays and sands which are classified unambiguously in this study by the soil behavior type classification Index (IC), the authors suggested the VS-CPTU data correlations expressed as a function of four parameters, qt, fs, $\sigma$, v0 and Bq, determined by multiple statistical regression modeling. Despite the incompatible strain levels of the down-hole seismic test during SCPTU and the conventional CPTU, it is shown that the VS-CPTU data correlations for all soils clays and sands suggested in this study is applicable to the preliminary estimation of VS for the Korean deposits and is more reliable than the previous correlations proposed by other researchers.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.157-165
• /
• 2006

The change of external/internal factors of the cell rquires specific biological functions to maintain life. Such functions encourage particular genes to jnteract/regulate each other in multiple ways. Accordingly, we applied a linear decomposition model IFSA, which derives hidden variables, called the 'expression mode' that corresponds to the functions. To interpret gene interaction/regulation, we used a cross-correlation method given an expression mode. Linear decomposition models such as principal component analysis (PCA) and independent component analysis (ICA) were shown to be useful in analyzing high dimensional DNA microarray data, compared to clustering methods. These methods assume that gene expression is controlled by a linear combination of uncorrelated/indepdendent latent variables. However these methods have some difficulty in grouping similar patterns which are slightly time-delayed or asymmetric since only exactly matched Patterns are considered. In order to overcome this, we employ the (IFSA) method of [1] to locate phase- and shut-invariant features. Membership scoring functions play an important role to classify genes since linear decomposition models basically aim at data reduction not but at grouping data. We address a new function essential to the IFSA method. In this paper we stress that IFSA is useful in grouping functionally-related genes in the presence of time-shift and expression phase variance. Ultimately, we propose a new approach to investigate the multiple interaction information of genes.

• Proceedings of the Technology Innovation Conference
• /
• 1997.07a
• /
• pp.222-223
• /
• 1997

By analyzing the successful innovation case of potato microtuber mass production technology, a representative case of technology-push type creative innovation in an imitation oriented research culture, this paper attempts to figure out conceptual model of creative innovation that is initiated by the public laboratories in catching-up country, Stages of creative innovation can be divided into the internal R&D stage and the external commercialization stage. Success of the internal R&D stage depended on autonomy to secure creative research idea and commitment of individual researchers. Psychological pressure evoked from sportlights of mass media and commitment of sponsor increased the intensity of research efforts of the researcher Recognition of research problem and its significance was intensified by site visits of agricultural fields, and the recognized higher impacts of expected research results and knowledge creation achieved were a fundamental source of self-motivation. In the stage of commercialization stage, various legal, socio-economic, and psychological barriers were confronted. In a catching-up country lacking of experiences of creative innovation, creative innovation process can be regarded as a barrier elimination and cultural revolution process. Among the barriers, psychological refusal of farmers to corn-sized potato seeds was critical, which finally enforced to further researches to enlarge the size of potato seeds. In addition, the researcher has concentrated his research efforts in one specialized research area by getting a series of similar research project funds rather than diversification. It was lucky for him to have a chance to carry out a series of similar researches in one research area during the last 10 years. In getting research funds from government and private companies continuously in one research area, both internal and external promoters played significant roles.