• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.2
• /
• pp.51-63
• /
• 2015

In order to investigation long-term variations of water qualities in the Saemangeum Salt-Water Lake formed after the sea-dike construction, the survey has carried out over 40 time from 2002 to 2010. The decreased salinity in surface water immediately after the dike construction has maintained on equal terms for years. After the dike construction, the early concentration of SPM in surface water has decreased but then it showed the tendency to move up and down due to the changes of water level in the lake. The elevated concentration of Chl-a in surface water initially after the dike construction was kept at the same conditions for years. The concentration of DIN in surface water has not changed before and shortly after the dike construction. However, the concentration of $NH_4-N$ in surface water has increased steadily after the dike construction. Consequently the concentration of DIN in the lake water after years has raised compared to pre-dike construction. The reduced concentration of DIP in surface water soon after the dike construction has increased after years as well as $NH_4-N$ due to the accumulation of organic matter to inside lake. Unlike with the unvaried $NO_3-N$, the concentration of DISi in surface water after the dike construction has immediately increased and maintained the enhanced level indicating the supply from other sources except the freshwater. Since the dike construction, the spatial characteristics of water quality was divided river sides and rest of the lake markedly. Stratification of river sides was more strong than the dike sides. In the warm seasons, hypoxia causing the release of nutrients and metals from sediment was observed downward about 1 m from surface of river sides. We strongly suggest to make some urgent measure to prevent low dissolved oxygen condition in the bottom layer of the river sides.

• Korean Security Journal
• /
• no.23
• /
• pp.21-39
• /
• 2010

The dangerous impact on the traffic flows of cars is caused by no only the construction on the street but diverse construction sites. This in turn substantially influence on the citizens and pedestrians, thereby bring about the possibility of giant incidents. As the countermeasure for the problem in advanced countries, particularly in Japan "traffic inducement security system" has been implemented. It is analyzed that the death toll from traffic accidents has considerably declined. In the case of South Korea the system has not been administered but restrictively executed at some construction sites; however proceeding it with the lack of professionalism. The introduction of traffic inducement security system would be the opportunity for South Korea to make a progress in the safety culture such as traffic security and traffic jam. This study thus aims at analyzing the advanced countries' cases, conducting comparative analysis with Korea's scheme, and establishing the plan to adopt the traffic inducement security system. Through the output of this study followings were proposed as plans of introducing the traffic inducement security system. First of all, legal assessments regarding traffic inducement operation, for example adding the operation of the system into the category of security service, need to be preceded prior to its introduction secondly, the traffic inducement security is the institution which can contribute to the improvement of traffic safety, and also internalizing social cost. therefore, it needs to be equipped with the new qualification such as the instruction with the standardized traffic safety map, instruction system, curriculum and the publication of teaching materials. thirdly, the education for the guard should be proceeded with dividing academic and technical ones with specific curriculum. At the fourth, the securement of the venue for the driving training, the determination on technical instruction contents and the training professional instructor needs for the method of administration. In addition, the efforts on the overal standardization of traffic inducement security is necessary, and it also requires constant collaboration among private security industry, academia, professionals, relavant research institutes, etc. At the last but the least, henceforth it is prerequisite that the networking system with a diverse array of associated entities due to its social ripple effect and job creation effect.

• Korean Journal of Ecology and Environment
• /
• v.50 no.1
• /
• pp.1-15
• /
• 2017

Daecheong Reservoir was made by the construction of a large dam (>15 m in height) on the middle to downstream of the Geum River and the discharge systems have the watergate-spillway (WS), a hydropower penstock (HPP), and two intake towers. The purpose of this study was to investigate the limnological anomalies of turbid water reduction, green algae phenomenon, and oligotrophic state in the lower part of reservoir dam site, and compared with hydro-meteorological factors. Field surveys were conducted in two stations of near dam and the outlet of HPP with one week intervals from January to December 2000. Rainfall was closely related to the fluctuations of inflow, outflow and water level. The rainfall pattern was depended on the storm of monsoon and typhoon, and the increase of discharge and turbidity responded more strongly to the intensity than the frequency. Water temperature and DO fluctuations within the reservoir water layer were influenced by meteorological and hydrological events, and these were mainly caused by water level fluctuation based on temperature stratification, density current and discharge types. The discharges of WS and HPP induced to the flow of water bodies and the outflows of turbid water and nutrients such as nitrogen and phosphorus, respectively. Especially, when hypoxic or low-oxygen condition was present in the bottom water, the discharge through HPP has contributed significantly to the outflow of phosphorus released from the sediment into the downstream of dam. In addition, HPP effluent which be continuously operated throughout the year, was the main factor that could change to a low trophic level in the downreservoir (lacustrine zone). And water-bloom (green-tide) occurring in the lower part of reservoir was the result that the water body of upreservoir being transported and diffused toward the downreseroir, when discharging through the WS. Finally, the hydropower effluent was included the importance and dynamics that could have a temporal and spatial impacts on the physical, chemical and biological factors of the reservoir ecosystem.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.43-71
• /
• 1999

This research is an experimental work of developing a construction material using municipal wastewater sludge as liner and cover materials for waste disposal landfill. Weathered granite soil and flyash, produced as a by-product in the power plant, were used as the primary additives to improve geotechnical engineering properties of sludge. For secondary additives, bentonite and cement were mixed with sludge to decrease the permeability and to increase the shear strength, respectively. Various laboratory test required to evaluate the design criteria for liner and cover materials, were carried out by changing the mixing ratio of sludge with the additives. Basic soil properties such as specific gravity, grain size distribution, liquid and plastic limits were measured to analyze their effects on permeability, compaction, compressibility and shear strength properties of mixtures. Laboratory compaction tests were conducted to find the maximum dry densities and the optimum moisture contents of mixtures, and their effectiveness of compaction in field was consequently evaluated. Permeability tests of variable heads with compacted samples, and the stress-controlled consolidation tests with measuring permeabilities of samples during consolidation process were performed to obtain permeability, and to find the compressibility as well as consolidational coefficients of mixtures, respectively. To evaluate the long term stability of sludges, creep tests were also conducted in parallel with permeability tests of variable heads. On the other hand, for the compacted sludge decomposed for a month, permeability tests were carried out to investigate the effect of decomposition of organic matters in sludges on its permeability. Direct shear tests were performed to evaluate the shear strength parameters of mixed sludge with weathered granite, flyash and bentonite. For the mixture of sludge with cement, unconfined compression tests were carried out to find their strength with varying mixing ratio and curing time. On the other hand, CBR tests for compacted specimen were also conducted to evaluate the trafficability of mixtures. Various test results with mixtures were assessed to evaluate whether their properties meet the requirements as liner and cover materials in waste disposal landfill.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.63-73
• /
• 2009

Recently, the use of lightweight panels in building structures has been increasing. Of the various lightweight panel types, styrofoam sandwich panels are inexpensive and are excellent in terms of their insulation capacity and their constructability. However, sandwich panels that include organic material are quite vulnerable to fire, and thus can numerous casualties in the event of a fire due to the lack of time to vacate and their emission of poisonous gas. On the other hand, lightweight foamed concrete is excellent, both in terms of its insulation ability and its fire resistance, due to its Inner pores. The properties of lightweight concrete is influenced by foaming agent type. Accordingly, this study investigates the insulation properties by foaming agent type, to evaluate the possibility of using light-weight foamed concrete instead of styrene foam. Our research found thatnon-heating zone temperature of lightweight foamed concrete using AP (Aluminum Powder) and FP (animal protein foaming agent) are lower than that of light-weight foamed concrete using AES (alkyl ether lactic acid ester). Lightweight foamed concrete using AES and FP satisfied fire performance requirements of two hours at a foam ratio 50, 100. Lightweight foamed concrete using AP satisfied fire performance requirements of two hours at AP ratio 0.1, 0.15. The insulation properties were better in closed pore foamed concrete by made AP, FP than with open pore foamed concrete made using AES.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.305-313
• /
• 2020

The use of cable tunnels for electric power transmission as well as their construction in difficult conditions such as in subsea terrains and large overburden areas has increased. So, in order to efficiently operate the small diameter shield TBM (Tunnel Boring Machine), the estimation of advance rate and development of a design model is necessary. However, due to limited scope of survey and face mapping, it is very difficult to match the rock mass characteristics and TBM operational data in order to achieve their mutual relationships and to develop an advance rate model. Also, the working mechanism of previously utilized linear cutting machine is slightly different than the real excavation mechanism owing to the penetration of a number of disc cutters taking place at the same time in the rock mass in conjunction with rotation of the cutterhead. So, in order to suggest the advance rate and machine design models for small diameter TBMs, an EPB (Earth Pressure Balance) shield TBM having 3.54 m diameter cutterhead was manufactured and 19 cases of full-scale tunneling tests were performed each in 87.5 ㎥ volume of artificial rock mass. The relationships between advance rate and machine data were effectively analyzed by performing the tests in homogeneous rock mass with 70 MPa uniaxial compressive strength according to the TBM operational parameters such as thrust force and RPM of cutterhead. The utilization of the recorded penetration depth and torque values in the development of models is more accurate and realistic since they were derived through real excavation mechanism. The relationships between normal force on single disc cutter and penetration depth as well as between normal force and rolling force were suggested in this study. The prediction of advance rate and design of TBM can be performed in rock mass having 70 MPa strength using these relationships. An effort was made to improve the application of the developed model by applying the FPI (Field Penetration Index) concept which can overcome the limitation of 100% RQD (Rock Quality Designation) in artificial rock mass.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.3
• /
• pp.22-31
• /
• 2012

This study was prompted by the recognition that the tenn "Community design" has recently been used in diverse practical fields without prior discussion about its underpinnings, a potentially problematic state of affairs. Based on these problems, this study studied the special quality about the concept of community design. Community design can be discussed from two perspectives. The first views community design as a design that concerns the community, an inhabited area populated with people who have common interests, at least in part because of geographic proximity to each other. The second sees community design as a movement that started in the 1960s and places a great importance on democratic decision making, communication, and collaboration. This study will focus on the latter. This branch of community design encompasses an advocacy planning approach, in which design professionals represent deprived communities in their resistance against comprehensive redevelopment. This was associated to the wider social protest movements of the mid and late 1960s. In the 1970s, this branch of community design was developed alongside community design centers, which provided local-level technical assistance to the communities on a number of issues, such as design and planning. The discussion about community design started in earnest from the early 1980s. A review of the literature m community design reveals several characteristics. First, community design deals with the relationship between the physical environment and several aspects of a region, including the social and cultural. Second, it involves community participation, which many scholars believe is the core of community design. Specifically, community design has been characterized by increased participation and democratic debate and decision making. The Third is about communication methods. Since the 1960s, diverse methods had been developed to promote communication effectively. Finally, community design must consider the relationship between designers, who typically value aesthetics and efficiency of form, and the needs of the community with which they are working. Indeed, some scholars believe that this relationship is generally contentious, although the designer can also be thought of as the facilitator of the community's needs. As community design practice becomes more prevalent, a review of the foundation of institution and policy and the role of experts is also needed. The community design movement bas been theorized ex post facto through diverse discussion that has sought to ascribe meaning and direction to its practice. In other words, the relationship between this theory and practice is cyclical. Therefore, this study can contribute to the virtuous circle.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.327-341
• /
• 2021

The riparian eco-belt is an efficient technique that can reduce non-point pollution sources in the basin and improve ecological connectivity and health. In Korea, a legal system for the construction and management of riparian eco-belts is in operation. However, it is currently excluded that rivers and floodplains in dam reservoir that are advantageous for buffer functions such as control of non-point pollutants and ecological habitats. Accordingly, this study presented and analyzed a plan to select a site for an integrated riparian ecol-belt that comprehensively evaluates the water quality and ecosystem characteristics of each dam floodplain and riparian zone for the Daecheong Dam basin in Geum River watershed. First, the Daecheong Dam basin was divided into 138 sub-basin with GIS, and the riparian zone adjacent to the dam floodplain was analyzed. Sixteen evaluation factors related to the ecosystem and water quality impact that affect the selection of integrated riparian eco-belt were decided, and weights for the importance of each factor were set through AHP analysis. The priority of site suitability was derived by conducting an integrated evaluation by applying weights to sub-basin by floodplains and riparian zone factors. In order to determine whether the sites derived through GIS site analysis are sutiable for actual implementation, five sites were inspected according to three factors: land use, pollution sources, and ecological connectivity. As a result, it was confirmed that all sites were appropriate to apply integrated riparian ecol-belt. It is judged that the riparian eco-belt site analysis technique proposed through this study can be applied as a useful tool when establishing an integrated riparian zone management policy in the future. However, it might be necessary to experiment various evaluation factors and weights for each item according to the characteristics and issues of each dam. Additional research need to be conducted on elaborated conservation and restoration strategies considering the Green-Blue Network aspect, evaluation of ecosystem services, and interconnection between related laws and policy and its improvements.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.423-431
• /
• 2011

The changes of forest degradation in North Korea have closely been related to political, economic and social conditions at all different times. The deforestation by local people for their livelihood has been accelerated when the recession has been worsened due to the 1990's collapse of socialism and the years of natural disasters, and the fall of the centralized and planned economy system. The serious recession in the 1990's has brought many changes in the North Korean society since the 2000's. Not only the underground economy, but also the market in which personal trades are occurred have been expanded as the distribution system of the planned economy system had fallen. In addition, even many state institutions have also increased timber harvest for export to acquire insufficient foreign currency. Eventually, North Korea felt the limits of utilization of forest resources under socialism then started to seek measures to restore devastated forest, while realizing the need of support from the international society. Therefore, some NGOs of South Korea started to give financial support on building tree nurseries in which seedlings for planting are produced to help the rehabilitation of the degraded forests in North Korea. Therefore, Planning of the basic directions for forest rehabilitation programs considering to economic and social conditions of North Korea are needed based on the successful rehabilitation experience of South Korea in the 1970's. First of all, relationships which was built after collapse of centrally planned economy between districts, businesses and workers must be consider to rehabilitate forests in North Korea. Secondly, due to the nature of forest rehabilitation projects this is very needs voluntary participation of resident for a long time, and then forest rehabilitation projects can create jobs for local resident, they can obtain continuous income on the forest rehabilitation projects field in order to promote resident's work in forest rehabilitation projects. Thirdly, the rate dependence on forests of the residents living must keep the level down by rural development projects going side by side with forest rehabilitation projects. Fourthly, use of exsisting forest management system in North Korea is also needed to ensure administrative power and labor for grand scale plantations in a short period of time. Meanwhile after the success of Forest Rehabilitation, it is very important to improve exsisting forest management system.