• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.257-262
• /
• 2002

Numerical model introduced in this study combines wave refraction-diffraction, breaking, bottom friction, lateral mixing, and critical shear stress and three sub-models for simulating waves, currents, and bottom change were briefly discussed. Simulations of beach processes and harbor sedimentation were also described at the coast neighboring Bangpo Harbor, Anmyundo, Chungnam, where the area has suffered from accumulation of drifting sand in a small fishing harbor with a wide tidal range. We also made model test for the case of a narrow tidal range at Nakdong river's estuary area to understand the effect of water level variation on the littoral drift. Simulations are conducted in terms of incident wave direction and tidal level. Characteristics of wave transformation, nearshore current, sediment transport, and bottom change are shown and analyzed. We found from the simulation that the tidal level impact to the sediment transport is very important and we should apply the numerical model with different water level to analyze sediment transport mechanism correctly. Although the model study gave reasonable description of beach processes and harbor sedimentation mechanism, it is necessary to collect lots of field observation data, including waves, tides and bottom materials, etc. for better prediction.

• Journal of Korean Port Research
• /
• v.15 no.1
• /
• pp.57-74
• /
• 2001

In the past, the predictions of beach processes and harbor sedimentation were mainly relied on the hydraulic model tests and empirical methods. In recent years, however, as computers have come into wide use, more accurate models have gradually been developed and thus replaced those conventional methods. For prediction of topographical change near the coastal area, we need informations of wave and current conditions in the numerical model which should be calculated in advance. Numerical model introduced in this study combines wave refraction-diffraction, breaking, bottom friction, lateral mixing, and critical shear stress and three sub-models for simulating waves, currents, and bottom change were briefly discussed. Simulations of beach processes and harbor sedimentation were also described at the coast neighboring Bangpo Harbor, Anmyundo, Chungnam, where the area has suffered accumulation of drifting sand in a small fishing harbor with a wide tidal range. We also made model test for the new layout of the harbor and planned south breakwater for preventing intrusion of sand. Although the model study gave reasonable description of beach processes and harbor sedimentation mechanism, it is necessary to collect lots of field observation data, including waves, tides and bottom materials, etc. for better prediction.

• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.477-486
• /
• 2012

High-resolution bathymetry and physico-chemical properties of manganese nodules were explored to identify the relationship between morphological features and nodule occurrences in the KR1, one of the Korean contract nodule fields located in the NE Pacific. The high-resolution seabed mapping showed that the southwestern sector of the KR1 (KR1-1) was relatively deeper than the northeastern sector (KR1-2) which is occupied by small-scale seamounts. In terms of nodule occurrence, manganese nodules in the KR1-1 were comparatively larger (2-4 cm) with rough surface (t-type) and discoidal shapes (D-type), while those in the KR1-2 were generally small (<2 cm) with smooth surface (s-type) and irregular shapes (I-type). In addition, the nodules in the KR1-1 had higher contents of Cu, Mn and Ni. Such connections of water depths to nodule appearances and metal contents are commonly observed in the Pacific nodule fields. On the other hand, the nodules in the KR1-2 tend to be controled by morphological features. The seamounts in the KR1-2 might continuously provide rock fragments as new nuclei of manganese nodules. As a result, the nodules could not grow over than 2 cm and showed the shapes of a newbie (i.e., smooth surface and irregular shapes). As a result, our observations indicate that occurrence features of manganese nodules could be subjected to water depths and seabed morphology simultaneously.

• Journal of the Korean earth science society
• /
• v.24 no.5
• /
• pp.477-490
• /
• 2003

Bottom sediments from Youngil Bay, East Coast of Korea, were analyzed for grain composition as well as elemental compositions and total organic carbon (TOC) content in order to investigate the spatial variability and content of metal elements. Grain size distribution of the sediments seems to be controlled by anticlockwise current pattern with bottom topography of the study area. Spatial variability of TOC and all elemental contents reflects those of grain size, but an exception was found in the harbor area (Old-Port): their contents are high in the central part of the bay with the muddy sediment and decrease toward the sand-dominated coastal zone. However, contents of Ca, Sr, K are high in the sand-dominated coastal zone and contents of some heavy metals (Cd, Cu, Zn) are high in the Old-Port area and the mouth of Hyeongsan River. The correlation matrix and R-mode factor analyses reveal that four important factors controlling the distribution of metals in the bay are sediment grain size (or quartz dilution effect), the formation of sulfide minerals associated with decomposition of organic matters under anoxic geochemical environment, calcium carbonate (mainly shell fragments) and coarse-grained feldspar mineral. According to the metal content of labile fraction an CER (concentration enrichment ratio) value, high accumulation of some heavy metals in the harbor area seems to result not formed by early diagenetic processes under anoxic environment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.1
• /
• pp.65-72
• /
• 1992

It is believed that the lower cold water is formed by winter cooling in the north of the East(Japan) Sea. To examine its effect on the general circulation of the East Sea, we performed a two-layer numerical model with realistic bottom topography. First a circulation is generated by imposing only an inflow and an outflow which is then modified by adding the cooling effect in the north. The interface between the two layers rises due to cooling and propagates along the coast as internal Kelvin waves. About 7 months after the cooling starts, all coastal areas of the basin have higher elevation than that in offshore region. This induces baroclinic currents resulting in clockwise(anticlockwise) circulation in upper (lower) layer of the basin. It is concluded that the East Korean Warm Current strengthens as a result of lower cold water formation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.154-163
• /
• 2015

This study is based on deductions from analysis of historical changes in hydrographic surveys, the problems with the existing system in Korea and analysis of the literature, including foreign cases. Using these criteria, we created and administered a survey of marine professionals of Korea, and based on the results, established an order of priority for hydrographic surveys, as follows: changes in the seabed, quantities of marine traffic, existing performance data from hydrographic survey, consumer's demand, marine accidents, conservation of oceanic environment, and natural resources. The study also deduced, based on a survey of experts, the relative importance ranking of the major ports in South Korea and suggests policy implications and a priority decision model to conduct future hydrographic surveys in a more scientific and systematic way.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.6
• /
• pp.457-473
• /
• 1992

The first order wave equation over a double shelf has wind stresses on both coastal boundaries and wind stress curl forcing across the shelf. In the Yellow Sea, the effect of wind stress curl can be neglected as a forcing of shelf waves. The decay distance of Kelvin waves is much greater than that of continental shelf waves so that Kelvin waves are transmitted nearly intact through the northern embayment. The numerical method of characteristics has been modified to accomodate wave propagation of opposite directions. Using a little more realistic coastline, the wave model hindcast has been improved for current velocity, but hardly for sea level. It means that Kelvin waves, which mainly determine sea levels, are affected little by the change of bottom slope. For a better hindcast of sea level, input energy of Kelvin waves transmitted from the East China Sea is needed. The basic structure of downwind flows along the coasts and upwind flows along the trough supports the seasonal circulations driven by monsoon winds in the Yellow Sea.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.4
• /
• pp.27-40
• /
• 2002

The circulation of sea water was simulated by two dimensional tide model using the main four tidal components and permanent current driven by inflow/outflow across open boundaries. According to the residt of tide model, the maximum speed of eastward flow on the Cheju Strait is twice higher than that of westward flow. According to the result of permanent current, the flow of permanent current showing semi-circle pattern in the southern part of Kojedo was due to variation of topography. According to the result of circulation model in the Cheju Strait, eastward flow entering in the southern waters from the Yellow Sea of Korea were dominant, but outflows westward were weak. These results suggest that it was difficult to move for suspended particulate matter into the Yellow sea from the southern waters through Cheju Strait.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.4
• /
• pp.231-242
• /
• 1992

This study uses a numerical model to investigate the circulation patterns of the tidal and wind driven current components. The model is vertically averaged 2-D transient using explicit nume-rical scheme, based on equation of motion and continuity. forced by water elevation at open boundaries and wind stress. The model domain extends from 35$^{\circ}$N to 36$^{\circ}$40'N lat., and 125$^{\circ}$E to 126$^{\circ}$40'E long. with x, y grid spacing of 5 km. The model reproduces the tide and tidal currents by 4 major constituents successfully with more than 90% accuracy when compared to two offshore tidal records and currents at one offshore measurements for 22 days. Responses of coastal waters to six schematic wind events are analyzed in terms of current distribution patterns and local features. Regardless of wind directions. strong coastal currents were produced. Bottom topography plays a critical role in producing a local eddy Held whose center is located offshore Pu An with its major radius of 40 km.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.187-192
• /
• 2015

Underwater acoustic communication channels have very complex channel characteristics caused by time-varying sea surface, submarine topography, sound speed, and geometry between transmitter and receiver. Especially, the channel has time-variance and doppler effect due to wind and sea current. We have to recognize the channel state and apply it to communication technique for increasing transmission efficiency in the underwater acoustic channel. In this paper, we present the frame recursive modulation and demodulation method using ambiguity function and autocorrelation function to estimate the doppler frequency. Furthermore, we conducted the simulation and sea experiment to evaluate the performance of the proposed method. When the channel coding technique was not used, the bit error rate performance of the proposed method was improved about 32 % compared with conventional method.